Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SMBG33-E3/5B
Lihat Butiran Helaian data

SMBG33-E3/5B

Product Overview

Category

The SMBG33-E3/5B belongs to the category of semiconductor devices.

Use

It is used for voltage regulation and protection in electronic circuits.

Characteristics

  • Low forward voltage drop
  • High surge capability
  • Fast response time

Package

The SMBG33-E3/5B comes in a surface mount package.

Essence

This device serves as a crucial component in ensuring stable and protected operation of electronic systems.

Packaging/Quantity

The SMBG33-E3/5B is typically packaged in reels and available in quantities suitable for production needs.

Specifications

  • Peak Pulse Power: 400W
  • Breakdown Voltage Range: 30V to 36.8V
  • Maximum Clamping Voltage: 48.4V
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The SMBG33-E3/5B has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

  • Transient voltage suppression
  • Overvoltage protection
  • Reverse polarity protection

Advantages and Disadvantages

Advantages

  • High surge capability
  • Fast response time
  • Compact size

Disadvantages

  • Limited breakdown voltage range
  • Sensitive to temperature variations

Working Principles

The SMBG33-E3/5B operates by diverting excess voltage away from sensitive components in the circuit, thereby protecting them from damage due to transient voltage spikes.

Detailed Application Field Plans

The SMBG33-E3/5B is commonly used in: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • SMAJ33A
  • P6SMB33CA
  • SMCJ33A

In conclusion, the SMBG33-E3/5B is a vital semiconductor device that provides essential voltage regulation and protection in various electronic applications. Its compact size, high surge capability, and fast response time make it a preferred choice for designers looking to safeguard their circuits from transient voltage spikes.

[Word count: 313]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SMBG33-E3/5B dalam penyelesaian teknikal

  1. What is the SMBG33-E3/5B used for in technical solutions?

    • The SMBG33-E3/5B is a precision voltage reference diode commonly used in technical solutions to provide stable and accurate voltage references for various applications.

  2. What is the operating temperature range of the SMBG33-E3/5B?

    • The SMBG33-E3/5B typically has an operating temperature range of -55°C to 150°C, making it suitable for a wide range of environmental conditions.

  3. How does the SMBG33-E3/5B contribute to circuit stability?

    • The SMBG33-E3/5B's low temperature coefficient and high stability make it an ideal component for maintaining precise voltage references in electronic circuits, contributing to overall circuit stability.

  4. Can the SMBG33-E3/5B be used in battery-powered devices?

    • Yes, the SMBG33-E3/5B's low power consumption and small form factor make it well-suited for use in battery-powered devices where efficient power management is crucial.

  5. What are the typical applications of the SMBG33-E3/5B in technical solutions?

    • The SMBG33-E3/5B is commonly used in analog and digital circuits, data acquisition systems, instrumentation, and other precision measurement equipment where stable voltage references are essential.

  6. Does the SMBG33-E3/5B require external components for operation?

    • In most cases, the SMBG33-E3/5B can operate independently as a voltage reference diode, but additional filtering or decoupling capacitors may be recommended for optimal performance in certain applications.

  7. What are the key electrical characteristics of the SMBG33-E3/5B?

    • The SMBG33-E3/5B typically exhibits low dynamic impedance, high reverse breakdown voltage, and low noise, which are important factors in its application within technical solutions.

  8. Is the SMBG33-E3/5B sensitive to electromagnetic interference (EMI)?

    • The SMBG33-E3/5B is designed to have good immunity to EMI, making it suitable for use in environments where electromagnetic disturbances may be present.

  9. Can the SMBG33-E3/5B be used in automotive electronics?

    • Yes, the SMBG33-E3/5B's robust construction and wide operating temperature range make it suitable for automotive applications where reliable voltage references are required.

  10. Are there any precautions to consider when using the SMBG33-E3/5B in technical solutions?

    • It's important to adhere to the manufacturer's guidelines for proper handling, storage, and soldering of the SMBG33-E3/5B to ensure its reliability and performance in technical solutions.