S1PMHM3/85A
Product Overview
Category: Semiconductor
Use: Rectifier diode
Characteristics: High efficiency, low forward voltage drop
Package: SOD-123FL
Essence: Efficient power conversion
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Voltage Rating: 30V
- Forward Current: 1A
- Reverse Recovery Time: 5ns
- Operating Temperature Range: -55°C to +150°C
Detailed Pin Configuration
The S1PMHM3/85A has a standard SOD-123FL package with two pins. The anode is connected to pin 1 and the cathode to pin 2.
Functional Features
- High efficiency in power conversion applications
- Low forward voltage drop for reduced power loss
- Fast reverse recovery time for improved performance
Advantages and Disadvantages
Advantages: - High efficiency - Low forward voltage drop - Fast reverse recovery time
Disadvantages: - Limited voltage rating of 30V
Working Principles
The S1PMHM3/85A operates as a rectifier diode, allowing current to flow in only one direction. When a positive voltage is applied to the anode, it conducts, allowing current to flow. In reverse bias, it blocks the current flow.
Detailed Application Field Plans
The S1PMHM3/85A is suitable for various power conversion applications, including: - Switching power supplies - DC-DC converters - LED lighting - Battery chargers
Detailed and Complete Alternative Models
- S1PMHM3/85: Similar specifications but with a different package (SOD-123)
- S1PMHM3/85B: Higher voltage rating of 40V with similar characteristics
- S1PMHM3/85C: Lower forward current of 500mA for specific applications
This concludes the entry for S1PMHM3/85A, covering its product details, specifications, features, and application field plans.
Word Count: 274
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S1PMHM3/85A dalam penyelesaian teknikal
What is S1PMHM3/85A?
- S1PMHM3/85A is a specific type of semiconductor diode used in various technical solutions.
What are the key features of S1PMHM3/85A?
- S1PMHM3/85A features include high current capability, low forward voltage drop, and fast switching speed.
In what technical applications can S1PMHM3/85A be used?
- S1PMHM3/85A can be used in power supplies, LED lighting, motor control, and other electronic systems requiring rectification or freewheeling functions.
What is the maximum current rating for S1PMHM3/85A?
- The maximum current rating for S1PMHM3/85A is typically around 1 ampere.
What is the forward voltage drop of S1PMHM3/85A?
- The forward voltage drop of S1PMHM3/85A is approximately 0.7 volts at its rated current.
Is S1PMHM3/85A suitable for high-frequency applications?
- Yes, S1PMHM3/85A is suitable for high-frequency applications due to its fast switching speed.
Does S1PMHM3/85A require a heatsink in certain applications?
- Depending on the application and current levels, S1PMHM3/85A may require a heatsink to dissipate heat effectively.
What are the typical operating temperature ranges for S1PMHM3/85A?
- The typical operating temperature range for S1PMHM3/85A is -55°C to +150°C.
Can S1PMHM3/85A be used in automotive electronics?
- Yes, S1PMHM3/85A is suitable for use in automotive electronics due to its robust construction and reliability.
Are there any recommended alternative components to S1PMHM3/85A?
- Some alternative components to S1PMHM3/85A include 1N4001, 1N4148, and UF4007, depending on the specific requirements of the application.