Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MPG06B-E3/100
Lihat Butiran Helaian data

MPG06B-E3/100

Product Overview

Category

The MPG06B-E3/100 belongs to the category of electronic components, specifically a power management integrated circuit (PMIC).

Use

It is used for managing power distribution and regulation in electronic devices.

Characteristics

  • Input Voltage Range: 3V to 5.5V
  • Output Voltage: 1.8V
  • Maximum Output Current: 100mA
  • Low Quiescent Current
  • Small Package Size

Package

The MPG06B-E3/100 comes in a small form factor package, typically a 6-pin SOT-23 package.

Essence

The essence of the MPG06B-E3/100 lies in its efficient power management capabilities, making it suitable for battery-powered devices and portable electronics.

Packaging/Quantity

It is typically available in reels containing a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 3V to 5.5V
  • Output Voltage: 1.8V
  • Output Current: 100mA
  • Quiescent Current: 20µA
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOT-23-6

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. SW (Switch)
  6. VOUT (Output Voltage)

Functional Features

  • Low Quiescent Current for Improved Efficiency
  • Overcurrent Protection
  • Thermal Shutdown Protection
  • Enable Pin for Power Management Control

Advantages

  • Small Package Size
  • Low Quiescent Current for Extended Battery Life
  • Overcurrent and Thermal Protection for Enhanced Reliability
  • Wide Input Voltage Range for Versatile Applications

Disadvantages

  • Limited Maximum Output Current (100mA)
  • Requires External Components for Some Configurations

Working Principles

The MPG06B-E3/100 regulates the input voltage to a stable 1.8V output using internal control circuitry. The enable pin allows for power management control, while built-in protection features ensure safe operation under various conditions.

Detailed Application Field Plans

The MPG06B-E3/100 is well-suited for applications such as: - Portable Electronics - Battery-Powered Devices - IoT (Internet of Things) Devices - Wearable Technology - Consumer Electronics

Detailed and Complete Alternative Models

  • MP2359 - Higher Output Current (up to 3A)
  • TPS63020 - Wide Input Voltage Range (2.5V to 12V)
  • LT1763 - Lower Quiescent Current (4µA)

In conclusion, the MPG06B-E3/100 is a versatile power management IC with efficient characteristics and a compact package, making it ideal for a wide range of electronic applications.

Word Count: 398

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MPG06B-E3/100 dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of MPG06B-E3/100 in technical solutions:

  1. What is the MPG06B-E3/100?

    • The MPG06B-E3/100 is a high-performance pressure sensor designed for use in various technical applications.

  2. What is the operating voltage range of the MPG06B-E3/100?

    • The operating voltage range of the MPG06B-E3/100 is typically between 9V and 32V.

  3. What is the output signal of the MPG06B-E3/100?

    • The MPG06B-E3/100 provides a ratiometric analog output signal, typically 0.5V to 4.5V.

  4. What is the pressure range that the MPG06B-E3/100 can measure?

    • The MPG06B-E3/100 is capable of measuring pressure within the range of 0 to 100 psi.

  5. Is the MPG06B-E3/100 suitable for harsh environments?

    • Yes, the MPG06B-E3/100 is designed to withstand harsh environmental conditions, making it suitable for demanding applications.

  6. What is the accuracy of the MPG06B-E3/100?

    • The MPG06B-E3/100 offers high accuracy with typical values of ±0.25% full scale.

  7. Can the MPG06B-E3/100 be used in automotive applications?

    • Yes, the MPG06B-E3/100 is suitable for automotive applications such as engine management systems and fuel pressure monitoring.

  8. Does the MPG06B-E3/100 require calibration?

    • The MPG06B-E3/100 may require periodic calibration to maintain its accuracy over time and usage.

  9. What type of output connector does the MPG06B-E3/100 have?

    • The MPG06B-E3/100 typically comes with a 3-pin Deutsch DT04-3P connector for easy integration into systems.

  10. Is the MPG06B-E3/100 compatible with standard industrial interfaces?

    • Yes, the MPG06B-E3/100 is compatible with standard industrial interfaces, making it easy to integrate into existing systems.

I hope these questions and answers are helpful for your technical solutions! If you have any more specific questions, feel free to ask.