Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
GP08GHE3/73
Lihat Butiran Helaian data

GP08GHE3/73 Product Overview

Introduction

The GP08GHE3/73 is a semiconductor product belonging to the category of diodes. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the GP08GHE3/73.

Basic Information Overview

  • Category: Diodes
  • Use: Rectification and signal processing in electronic circuits
  • Characteristics: High efficiency, low power loss, fast switching speed
  • Package: SOD-123FL
  • Essence: Semiconductor material with specific doping for desired electrical properties
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Forward Voltage: 0.7V
  • Reverse Voltage: 80V
  • Average Rectified Current: 1A
  • Peak Surge Current: 30A
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The GP08GHE3/73 has a SOD-123FL package with two pins. Pin 1 is the cathode (K) and pin 2 is the anode (A).

Functional Features

  • Fast recovery time
  • Low forward voltage drop
  • High surge current capability
  • High reliability and ruggedness

Advantages and Disadvantages

Advantages

  • Efficient rectification
  • Fast switching speed
  • Compact package size

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitivity to overvoltage conditions

Working Principles

The GP08GHE3/73 operates based on the principles of semiconductor physics, utilizing P-N junctions to allow current flow in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

The GP08GHE3/73 is commonly used in: - Power supplies - LED lighting - Battery chargers - Switching power converters

Detailed and Complete Alternative Models

  • GP10GHE3/73: Higher reverse voltage rating
  • GP06GHE3/73: Lower forward voltage drop
  • GP08GHE3/75: Different packaging option (SOD-123)

In conclusion, the GP08GHE3/73 diode offers efficient rectification and fast switching speed, making it suitable for various electronic applications. Its compact size and high reliability make it a preferred choice for designers seeking high-performance diodes.

[Word Count: 320]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi GP08GHE3/73 dalam penyelesaian teknikal

  1. What is GP08GHE3/73?

    • GP08GHE3/73 is a specific model of electronic component, such as a diode or transistor, commonly used in technical solutions.

  2. What are the key specifications of GP08GHE3/73?

    • The key specifications of GP08GHE3/73 include its voltage and current ratings, package type, maximum power dissipation, and frequency response.

  3. How can GP08GHE3/73 be used in technical solutions?

    • GP08GHE3/73 can be used in technical solutions for applications such as voltage regulation, signal amplification, rectification, and switching.

  4. What are the typical operating conditions for GP08GHE3/73?

    • The typical operating conditions for GP08GHE3/73 include a specified range of input voltage, temperature, and load conditions.

  5. What are the potential failure modes of GP08GHE3/73?

    • Potential failure modes of GP08GHE3/73 may include overvoltage, overcurrent, thermal stress, and voltage transients.

  6. How should GP08GHE3/73 be integrated into a technical solution?

    • GP08GHE3/73 should be integrated following the manufacturer's recommended circuit design, layout guidelines, and thermal management practices.

  7. Are there any common issues or challenges associated with using GP08GHE3/73?

    • Common issues or challenges may include thermal management, voltage spikes, EMI interference, and component compatibility.

  8. What are the alternatives to GP08GHE3/73 for similar technical applications?

    • Alternatives to GP08GHE3/73 may include other diodes or transistors with comparable specifications and performance characteristics.

  9. What are the best practices for testing GP08GHE3/73 in a technical solution?

    • Best practices for testing GP08GHE3/73 may involve verifying its electrical performance, thermal behavior, and reliability under various operating conditions.

  10. Where can I find additional resources or support for using GP08GHE3/73 in technical solutions?

    • Additional resources and support for using GP08GHE3/73 can be found through the component manufacturer's datasheets, application notes, and technical support channels.