Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC9236A30DMR-G
Lihat Butiran Helaian data

XC9236A30DMR-G

Product Overview

Category

XC9236A30DMR-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC9236A30DMR-G is available in a small form factor package, such as SOT-23 or DFN.

Essence

The essence of XC9236A30DMR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

Typically, XC9236A30DMR-G is packaged in reels or tubes, with quantities ranging from a few hundred to several thousand units per package.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.0V
  • Output Current: Up to 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC9236A30DMR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • High Precision Regulation: The XC9236A30DMR-G provides precise voltage regulation, ensuring stable and accurate output voltage.
  • Low Dropout Voltage: With a low dropout voltage, the regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The device consumes minimal current when in standby mode, resulting in improved energy efficiency.
  • Thermal Shutdown Protection: The regulator includes built-in thermal shutdown protection, preventing damage due to excessive heat.
  • Short Circuit Protection: XC9236A30DMR-G features short circuit protection, safeguarding the device and connected components from potential damage.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures accurate output.
  • Low dropout voltage allows for efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption in standby mode.
  • Thermal shutdown protection prevents overheating and damage.
  • Short circuit protection safeguards the device and connected components.

Disadvantages

  • Limited output current capacity (up to 300mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC9236A30DMR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring and adjusting, the regulator compensates for changes in input voltage and load conditions, ensuring a consistent and regulated output.

Detailed Application Field Plans

XC9236A30DMR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC9236A30DMR-G are: - LM1117-3.3: A popular linear voltage regulator with similar specifications. - AP2112-3.3: Another low dropout voltage regulator suitable for various applications. - TPS79633: A high-performance, low dropout voltage regulator with adjustable output voltage.

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 527 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC9236A30DMR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC9236A30DMR-G in technical solutions:

  1. Q: What is XC9236A30DMR-G? A: XC9236A30DMR-G is a voltage regulator IC (integrated circuit) that provides a stable output voltage of 3.0V.

  2. Q: What is the input voltage range for XC9236A30DMR-G? A: The input voltage range for XC9236A30DMR-G is typically between 2.5V and 6.0V.

  3. Q: What is the maximum output current of XC9236A30DMR-G? A: The maximum output current of XC9236A30DMR-G is 300mA.

  4. Q: Can XC9236A30DMR-G be used in battery-powered applications? A: Yes, XC9236A30DMR-G can be used in battery-powered applications as it has low quiescent current and high efficiency.

  5. Q: Is XC9236A30DMR-G suitable for automotive applications? A: Yes, XC9236A30DMR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  6. Q: Does XC9236A30DMR-G have built-in overcurrent protection? A: Yes, XC9236A30DMR-G has built-in overcurrent protection to safeguard against excessive current draw.

  7. Q: Can XC9236A30DMR-G operate in a wide temperature range? A: Yes, XC9236A30DMR-G can operate in a wide temperature range from -40°C to +105°C.

  8. Q: Does XC9236A30DMR-G require any external components for operation? A: Yes, XC9236A30DMR-G requires a few external components such as input/output capacitors and resistors for stability and filtering.

  9. Q: Can XC9236A30DMR-G be used in space-constrained applications? A: Yes, XC9236A30DMR-G is available in a compact DFN package, making it suitable for space-constrained applications.

  10. Q: Is XC9236A30DMR-G RoHS compliant? A: Yes, XC9236A30DMR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.