Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6124C317MR-G
Lihat Butiran Helaian data

XC6124C317MR-G

Product Overview

Category

XC6124C317MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124C317MR-G is available in a small surface-mount package.

Essence

The essence of XC6124C317MR-G lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.17V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C317MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124C317MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the device and connected components.
  • Thermal shutdown protection: In case of excessive heat, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range makes it suitable for various applications.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124C317MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active and passive components within the regulator.

Detailed Application Field Plans

XC6124C317MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C317MR-G are: - XC6206P317MR-G - XC6220B317MR-G - XC6219B317MR-G - XC6221B317MR-G - XC6223B317MR-G

These models offer similar functionality and characteristics, providing flexibility in design choices.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6124C317MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6124C317MR-G in technical solutions:

  1. Question: What is XC6124C317MR-G?
    - Answer: XC6124C317MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.

  2. Question: What is the operating voltage range of XC6124C317MR-G?
    - Answer: The operating voltage range of XC6124C317MR-G is from 0.7V to 6.0V.

  3. Question: What is the purpose of XC6124C317MR-G in technical solutions?
    - Answer: XC6124C317MR-G is primarily used as a voltage monitoring and detection component in electronic circuits. It can detect when the voltage exceeds or falls below a certain threshold.

  4. Question: What is the output type of XC6124C317MR-G?
    - Answer: XC6124C317MR-G has an open-drain output type, which means it can be connected to other components using a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6124C317MR-G?
    - Answer: The typical quiescent current consumption of XC6124C317MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124C317MR-G be used for overvoltage protection?
    - Answer: No, XC6124C317MR-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection purposes.

  7. Question: What is the temperature range within which XC6124C317MR-G operates?
    - Answer: XC6124C317MR-G operates within a temperature range of -40°C to +85°C.

  8. Question: Can XC6124C317MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124C317MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Question: Does XC6124C317MR-G have any built-in delay function?
    - Answer: No, XC6124C317MR-G does not have a built-in delay function. It provides an immediate output response when the voltage threshold is crossed.

  10. Question: Is XC6124C317MR-G RoHS compliant?
    - Answer: Yes, XC6124C317MR-G is RoHS (Restriction of Hazardous Substances) compliant, which means it meets the environmental standards set by the European Union.

Please note that the answers provided here are general and may vary depending on specific application requirements.