TLV2461AQPWRG4Q1
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output, Single-Supply
- Package: 8-pin TSSOP (Thin Shrink Small Outline Package)
- Essence: TLV2461AQPWRG4Q1 is a low-power operational amplifier designed for various applications that require high precision and low power consumption.
- Packaging/Quantity: The TLV2461AQPWRG4Q1 is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 6V
- Input Offset Voltage: ±1.5mV (maximum)
- Input Bias Current: ±0.5pA (typical)
- Gain Bandwidth Product: 10MHz (typical)
- Slew Rate: 3.6V/µs (typical)
- Quiescent Current: 900µA (typical)
- Operating Temperature Range: -40°C to 125°C
Pin Configuration
The TLV2461AQPWRG4Q1 has the following pin configuration:
___________
OUT | 1 8 | VCC+
IN- | 2 7 | IN+
IN+ | 3 6 | VCC-
GND | 4 5 | NC
‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low input offset voltage and bias current for improved accuracy.
- Rail-to-rail input and output capability allows for maximum dynamic range.
- Wide supply voltage range enables operation from a single power supply.
- Low quiescent current for power-sensitive applications.
- High gain bandwidth product and slew rate for fast signal processing.
Advantages and Disadvantages
Advantages: - High precision and accuracy. - Wide operating temperature range. - Low power consumption. - Versatile rail-to-rail input/output capability.
Disadvantages: - Limited output current capability. - Single-supply operation may limit certain applications.
Working Principles
The TLV2461AQPWRG4Q1 is an operational amplifier that amplifies the difference between its two input terminals. It operates on a single power supply and provides a high gain with low power consumption. The rail-to-rail input/output capability allows it to handle signals close to the supply rails, maximizing the dynamic range. The low input offset voltage and bias current ensure accurate amplification of small signals.
Detailed Application Field Plans
The TLV2461AQPWRG4Q1 is suitable for various applications, including but not limited to: - Sensor signal conditioning - Battery-powered instrumentation - Portable medical devices - Audio amplification - Active filters - Data acquisition systems
Detailed and Complete Alternative Models
Some alternative models to TLV2461AQPWRG4Q1 with similar characteristics and performance include: - LMV321 - MCP6001 - MAX4239
These alternatives can be considered based on specific application requirements and availability.
Word count: 275 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TLV2461AQPWRG4Q1 dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of TLV2461AQPWRG4Q1 in technical solutions:
1. What is TLV2461AQPWRG4Q1? TLV2461AQPWRG4Q1 is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for automotive applications.
2. What is the supply voltage range for TLV2461AQPWRG4Q1? The supply voltage range for TLV2461AQPWRG4Q1 is from 2.7V to 5.5V.
3. What is the typical input offset voltage of TLV2461AQPWRG4Q1? The typical input offset voltage of TLV2461AQPWRG4Q1 is 0.5mV.
4. Can TLV2461AQPWRG4Q1 operate at high temperatures? Yes, TLV2461AQPWRG4Q1 is designed to operate at high temperatures up to 125°C.
5. What is the typical gain bandwidth product of TLV2461AQPWRG4Q1? The typical gain bandwidth product of TLV2461AQPWRG4Q1 is 1MHz.
6. Is TLV2461AQPWRG4Q1 suitable for low-power applications? Yes, TLV2461AQPWRG4Q1 is specifically designed for low-power applications, consuming only 900µA of quiescent current.
7. Can TLV2461AQPWRG4Q1 operate with a single power supply? Yes, TLV2461AQPWRG4Q1 can operate with a single power supply, making it suitable for battery-powered applications.
8. What is the input common-mode voltage range of TLV2461AQPWRG4Q1? The input common-mode voltage range of TLV2461AQPWRG4Q1 extends from the negative supply rail to within 1.5V of the positive supply rail.
9. Does TLV2461AQPWRG4Q1 have built-in EMI/RFI filters? No, TLV2461AQPWRG4Q1 does not have built-in EMI/RFI filters. Additional external filtering may be required in sensitive applications.
10. Can TLV2461AQPWRG4Q1 drive capacitive loads? Yes, TLV2461AQPWRG4Q1 can drive capacitive loads up to 100pF without any additional compensation.
Please note that these answers are based on general information about TLV2461AQPWRG4Q1 and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.