TLE2081ACDG4
Product Overview
Category
The TLE2081ACDG4 belongs to the category of operational amplifiers (op-amps).
Use
It is commonly used as a high-performance, low-power operational amplifier for various analog applications.
Characteristics
- Low input bias current
- Low offset voltage
- High slew rate
- Wide bandwidth
- Low noise
Package
The TLE2081ACDG4 comes in a small-outline IC (SOIC) package.
Essence
This op-amp is essential for precision analog signal processing and amplification.
Packaging/Quantity
The TLE2081ACDG4 is typically packaged in reels with a quantity of 2500 units per reel.
Specifications
- Supply Voltage: ±2.5V to ±18V
- Input Offset Voltage: 150µV (maximum)
- Input Bias Current: 0.3pA (maximum)
- Slew Rate: 15V/µs
- Bandwidth: 8MHz
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The TLE2081ACDG4 has a standard 8-pin SOIC package with the following pin configuration: 1. Non-inverting input (+IN) 2. Inverting input (-IN) 3. Negative power supply (-V) 4. Output (OUT) 5. Positive power supply (+V) 6. Compensation 7. Not connected (NC) 8. VCC+
Functional Features
- High input impedance
- Rail-to-rail output swing
- Low distortion
- ESD protection
- Short-circuit protection
Advantages and Disadvantages
Advantages
- High precision
- Low power consumption
- Wide operating voltage range
- Robustness against ESD and short circuits
Disadvantages
- Limited output current capability
- Higher cost compared to general-purpose op-amps
Working Principles
The TLE2081ACDG4 operates based on the principles of differential amplification and feedback control, providing accurate and stable amplification of analog signals.
Detailed Application Field Plans
The TLE2081ACDG4 is widely used in the following applications: - Instrumentation amplifiers - Sensor signal conditioning - Active filters - Data acquisition systems - Precision voltage/current measurement
Detailed and Complete Alternative Models
Some alternative models to the TLE2081ACDG4 include: - LM324 - AD822 - OPA227
In conclusion, the TLE2081ACDG4 is a high-performance operational amplifier with versatile applications in precision analog signal processing and amplification, making it an essential component in various electronic systems.
[Word Count: 366]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TLE2081ACDG4 dalam penyelesaian teknikal
What is the TLE2081ACDG4?
- The TLE2081ACDG4 is a high-speed operational amplifier designed for applications requiring wide bandwidth and high slew rate.
What are the key features of the TLE2081ACDG4?
- The TLE2081ACDG4 features low input bias current, low noise, and high output current drive capability, making it suitable for precision and high-speed applications.
What are the typical applications of the TLE2081ACDG4?
- Typical applications include active filters, integrators, differential amplifiers, and high-frequency signal processing.
What is the supply voltage range for the TLE2081ACDG4?
- The TLE2081ACDG4 operates from a single or dual power supply ranging from ±2.5V to ±18V.
What is the input offset voltage of the TLE2081ACDG4?
- The input offset voltage is typically 300µV, which makes it suitable for precision applications.
What is the unity-gain bandwidth of the TLE2081ACDG4?
- The unity-gain bandwidth is typically 8 MHz, allowing for high-frequency signal processing.
Does the TLE2081ACDG4 have thermal shutdown protection?
- Yes, the TLE2081ACDG4 includes thermal shutdown protection to prevent damage from excessive heat.
Can the TLE2081ACDG4 be used in low-power applications?
- Yes, the TLE2081ACDG4 has a low quiescent current, making it suitable for low-power applications.
Is the TLE2081ACDG4 available in a small package size?
- Yes, the TLE2081ACDG4 is available in a small MSOP-8 package, which is suitable for space-constrained designs.
What are the recommended operating conditions for the TLE2081ACDG4?
- The recommended operating temperature range is -40°C to 125°C, and it is suitable for a wide range of industrial and automotive applications.