SN74LVTH543PW

Product Overview

• Category: Integrated Circuit (IC)
• Use: Level Shifter and Bus Transceiver
• Characteristics: High-speed, low-voltage, and low-power consumption
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: Bi-directional voltage level translator
• Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

• Supply Voltage Range: 2.7V to 3.6V
• Logic Voltage Levels: 1.65V to 3.6V
• Input/Output Compatibility: TTL, CMOS
• Number of Channels: 8
• Output Drive Strength: ±12mA
• Propagation Delay: 4.5ns (Max)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74LVTH543PW has a total of 24 pins, which are assigned as follows:

• Pin 1: OE (Output Enable) for Channel 1
• Pin 2: I/O1A (Input/Output) for Channel 1
• Pin 3: GND (Ground)
• Pin 4: I/O1B (Input/Output) for Channel 1
• Pin 5: VCC (Supply Voltage)
• Pin 6: I/O2B (Input/Output) for Channel 2
• Pin 7: GND (Ground)
• Pin 8: I/O2A (Input/Output) for Channel 2
• Pin 9: OE (Output Enable) for Channel 2
• Pin 10: I/O3A (Input/Output) for Channel 3
• Pin 11: GND (Ground)
• Pin 12: I/O3B (Input/Output) for Channel 3
• Pin 13: VCC (Supply Voltage)
• Pin 14: I/O4B (Input/Output) for Channel 4
• Pin 15: GND (Ground)
• Pin 16: I/O4A (Input/Output) for Channel 4
• Pin 17: OE (Output Enable) for Channel 4
• Pin 18: I/O5A (Input/Output) for Channel 5
• Pin 19: GND (Ground)
• Pin 20: I/O5B (Input/Output) for Channel 5
• Pin 21: VCC (Supply Voltage)
• Pin 22: I/O6B (Input/Output) for Channel 6
• Pin 23: GND (Ground)
• Pin 24: I/O6A (Input/Output) for Channel 6

Functional Features

• Bi-directional voltage level translation between two different voltage domains.
• Allows interfacing between devices operating at different logic levels.
• Provides bidirectional data flow with non-inverting outputs.
• Supports both TTL and CMOS input/output compatibility.
• High-speed operation with low propagation delay.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems. - Low power consumption helps in reducing overall energy usage. - High-speed operation enables efficient data transfer. - Bi-directional capability simplifies system design.

Disadvantages: - Limited number of channels may restrict simultaneous data transmission. - Propagation delay may affect real-time applications with strict timing requirements.

Working Principles

The SN74LVTH543PW is designed to translate logic levels between two voltage domains. It utilizes a combination of MOSFETs and CMOS technology to achieve bi-directional voltage level shifting. The device operates by monitoring the input signals and translating them to the corresponding output voltage levels. The OE pins control the direction of data flow, enabling or disabling the outputs as required.

Detailed Application Field Plans

The SN74LVTH543PW finds applications in various fields, including:

1. Microcontroller Interfacing: It enables communication between microcontrollers operating at different logic levels.
2. Bus Transceivers: Facilitates bidirectional data transfer between buses with different voltage requirements.
3. Level Shifting: Allows interfacing between devices with incompatible logic voltage levels.
4. Industrial Automation: Used in control systems to interface sensors and actuators operating at different voltage levels.
5. Communication Systems: Enables signal translation between different communication protocols and voltage domains.

Detailed and Complete Alternative Models

1. SN74LVC543APW
2. SN74AVC543PW
3. SN74HCT543PW
4. SN74ACT543PW
5. SN74AHC543PW

These alternative models offer similar functionality and can be considered as replacements for the SN74LVTH543PW based on specific system requirements.

Word count: 550 words