Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74LVTH16374GQLR
Lihat Butiran Helaian data

SN74LVTH16374GQLR

Product Overview

  • Category: Integrated Circuit
  • Use: Digital Logic
  • Characteristics: High-speed, Low-voltage, 16-bit D-type Flip-Flop with 3-state outputs
  • Package: 48-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Flip-flop IC with 3-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Technology: Low-Voltage CMOS (Complementary Metal-Oxide-Semiconductor)
  • Supply Voltage Range: 2.7V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 4.1ns (typical)
  • Output Drive Capability: ±24mA
  • Number of Flip-Flops: 16
  • Output Type: 3-state

Detailed Pin Configuration

The SN74LVTH16374GQLR has a total of 48 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. Q0 (Output 0)
  3. D0 (Data input 0)
  4. D1 (Data input 1)
  5. D2 (Data input 2)
  6. D3 (Data input 3)
  7. D4 (Data input 4)
  8. D5 (Data input 5)
  9. D6 (Data input 6)
  10. D7 (Data input 7)
  11. D8 (Data input 8)
  12. D9 (Data input 9)
  13. D10 (Data input 10)
  14. D11 (Data input 11)
  15. D12 (Data input 12)
  16. D13 (Data input 13)
  17. VCC (Supply voltage)
  18. Q1 (Output 1)
  19. Q2 (Output 2)
  20. Q3 (Output 3)
  21. Q4 (Output 4)
  22. Q5 (Output 5)
  23. Q6 (Output 6)
  24. Q7 (Output 7)
  25. Q8 (Output 8)
  26. Q9 (Output 9)
  27. Q10 (Output 10)
  28. Q11 (Output 11)
  29. Q12 (Output 12)
  30. Q13 (Output 13)
  31. Q14 (Output 14)
  32. Q15 (Output 15)
  33. OE (Output Enable)
  34. GND (Ground)
  35. Qn (Output n)
  36. Dn (Data input n)
  37. Dn+1 (Data input n+1)
  38. Dn+2 (Data input n+2)
  39. Dn+3 (Data input n+3)
  40. Dn+4 (Data input n+4)
  41. Dn+5 (Data input n+5)
  42. Dn+6 (Data input n+6)
  43. Dn+7 (Data input n+7)
  44. Dn+8 (Data input n+8)
  45. Dn+9 (Data input n+9)
  46. Dn+10 (Data input n+10)
  47. Dn+11 (Data input n+11)
  48. VCC (Supply voltage)

Functional Features

  • High-speed operation: The SN74LVTH16374GQLR is designed to operate at high speeds, making it suitable for applications that require fast data processing.
  • Low-voltage operation: With a supply voltage range of 2.7V to 3.6V, this IC is compatible with low-voltage systems, reducing power consumption.
  • 3-state outputs: The 3-state outputs allow multiple devices to share the same bus without interfering with each other, enabling efficient data transfer.

Advantages and Disadvantages

Advantages: - High-speed operation enables fast data processing. - Low-voltage operation reduces power consumption. - 3-state outputs facilitate efficient data transfer in shared bus systems.

Disadvantages: - Limited number of flip-flops (16) may not be sufficient for certain applications requiring more storage capacity. - The TSSOP package may be challenging to solder manually due to its small size.

Working Principles

The SN74LVTH16374GQLR is a 16-bit D-type flip-flop with 3-state outputs. It operates based on the principles of digital logic. The flip-flop stores binary information in its internal memory cells and can be controlled to either hold or change the stored data based on input signals. The 3-state outputs allow the device to disconnect from the

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74LVTH16374GQLR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74LVTH16374GQLR:

  1. Q: What is SN74LVTH16374GQLR? A: SN74LVTH16374GQLR is a 16-bit D-type flip-flop with 3-state outputs, designed for low-voltage (LV) operation.

  2. Q: What is the voltage range supported by SN74LVTH16374GQLR? A: SN74LVTH16374GQLR supports a voltage range of 1.65V to 3.6V.

  3. Q: What is the maximum operating frequency of SN74LVTH16374GQLR? A: The maximum operating frequency of SN74LVTH16374GQLR is typically around 200MHz.

  4. Q: Can SN74LVTH16374GQLR be used in both input and output applications? A: Yes, SN74LVTH16374GQLR can be used as both an input and output device.

  5. Q: How many flip-flops are there in SN74LVTH16374GQLR? A: SN74LVTH16374GQLR contains 16 individual D-type flip-flops.

  6. Q: What is the purpose of the 3-state outputs in SN74LVTH16374GQLR? A: The 3-state outputs allow multiple devices to share a common bus without interfering with each other.

  7. Q: Can SN74LVTH16374GQLR handle high-speed data transfers? A: Yes, SN74LVTH16374GQLR is designed to support high-speed data transfers.

  8. Q: Is SN74LVTH16374GQLR compatible with other logic families? A: Yes, SN74LVTH16374GQLR is compatible with both TTL and CMOS logic families.

  9. Q: What is the power supply voltage required for SN74LVTH16374GQLR? A: SN74LVTH16374GQLR requires a power supply voltage of 2.5V to 3.6V.

  10. Q: Can SN74LVTH16374GQLR be used in automotive applications? A: Yes, SN74LVTH16374GQLR is suitable for automotive applications as it meets the necessary standards and requirements.

Please note that these answers are general and may vary depending on specific application requirements.