Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74CBT16211AGQLR
Lihat Butiran Helaian data

SN74CBT16211AGQLR

Product Overview

  • Category: Integrated Circuit
  • Use: Digital Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power, bidirectional switching capabilities
  • Package: 56-pin VQFN (Very Thin Quad Flat No-Lead)
  • Essence: A versatile digital multiplexer/demultiplexer IC with advanced features
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Switching Speed: Up to 400Mbps
  • On-state Resistance: 4Ω (typical)
  • Number of Channels: 24
  • ESD Protection: >2000V (Human Body Model)

Detailed Pin Configuration

The SN74CBT16211AGQLR has a total of 56 pins, which are assigned as follows:

  1. OE (Output Enable) 1
  2. I/O0 (Bidirectional Data I/O) 1
  3. I/O1 (Bidirectional Data I/O) 1
  4. GND (Ground)
  5. I/O2 (Bidirectional Data I/O) 1
  6. I/O3 (Bidirectional Data I/O) 1
  7. VCC (Supply Voltage)
  8. I/O4 (Bidirectional Data I/O) 1
  9. I/O5 (Bidirectional Data I/O) 1
  10. I/O6 (Bidirectional Data I/O) 1
  11. I/O7 (Bidirectional Data I/O) 1
  12. I/O8 (Bidirectional Data I/O) 1
  13. I/O9 (Bidirectional Data I/O) 1
  14. I/O10 (Bidirectional Data I/O) 1
  15. I/O11 (Bidirectional Data I/O) 1
  16. I/O12 (Bidirectional Data I/O) 1
  17. I/O13 (Bidirectional Data I/O) 1
  18. I/O14 (Bidirectional Data I/O) 1
  19. I/O15 (Bidirectional Data I/O) 1
  20. I/O16 (Bidirectional Data I/O) 1
  21. I/O17 (Bidirectional Data I/O) 1
  22. I/O18 (Bidirectional Data I/O) 1
  23. I/O19 (Bidirectional Data I/O) 1
  24. I/O20 (Bidirectional Data I/O) 1
  25. I/O21 (Bidirectional Data I/O) 1
  26. I/O22 (Bidirectional Data I/O) 1
  27. I/O23 (Bidirectional Data I/O) 1
  28. GND (Ground)
  29. S0 (Select Input) 1
  30. S1 (Select Input) 1
  31. S2 (Select Input) 1
  32. S3 (Select Input) 1
  33. GND (Ground)
  34. I/O23 (Bidirectional Data I/O) 2
  35. I/O22 (Bidirectional Data I/O) 2
  36. I/O21 (Bidirectional Data I/O) 2
  37. I/O20 (Bidirectional Data I/O) 2
  38. I/O19 (Bidirectional Data I/O) 2
  39. I/O18 (Bidirectional Data I/O) 2
  40. I/O17 (Bidirectional Data I/O) 2
  41. I/O16 (Bidirectional Data I/O) 2
  42. I/O15 (Bidirectional Data I/O) 2
  43. I/O14 (Bidirectional Data I/O) 2
  44. I/O13 (Bidirectional Data I/O) 2
  45. I/O12 (Bidirectional Data I/O) 2
  46. I/O11 (Bidirectional Data I/O) 2
  47. I/O10 (Bidirectional Data I/O) 2
  48. I/O9 (Bidirectional Data I/O) 2
  49. I/O8 (Bidirectional Data I/O) 2
  50. VCC (Supply Voltage)
  51. I/O7 (Bidirectional Data I/O) 2
  52. I/O6 (Bidirectional Data I/O) 2
  53. I/O5 (Bidirectional Data I/O) 2
  54. I/O4 (Bidirectional Data I/O) 2
  55. GND (Ground)
  56. OE (Output Enable) 2

Functional Features

  • Bidirectional switching: Allows data transmission in both directions

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74CBT16211AGQLR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74CBT16211AGQLR in technical solutions:

  1. Q: What is SN74CBT16211AGQLR? A: SN74CBT16211AGQLR is a high-speed, low-power 24-bit bus switch with 5V tolerant inputs and outputs.

  2. Q: What are the key features of SN74CBT16211AGQLR? A: Some key features include wide voltage range (1.65V to 3.6V), low on-state resistance, and bidirectional switching capability.

  3. Q: How can SN74CBT16211AGQLR be used in technical solutions? A: It can be used for level shifting, signal routing, bus isolation, and multiplexing applications in various digital systems.

  4. Q: What is the maximum data rate supported by SN74CBT16211AGQLR? A: SN74CBT16211AGQLR supports a maximum data rate of 400 Mbps.

  5. Q: Can SN74CBT16211AGQLR handle both analog and digital signals? A: No, SN74CBT16211AGQLR is designed specifically for digital signals and is not suitable for handling analog signals.

  6. Q: What is the power supply voltage range for SN74CBT16211AGQLR? A: The power supply voltage range is typically between 1.65V and 3.6V.

  7. Q: Does SN74CBT16211AGQLR have built-in ESD protection? A: Yes, SN74CBT16211AGQLR has built-in ESD protection to prevent damage from electrostatic discharge.

  8. Q: Can SN74CBT16211AGQLR be used in hot-swapping applications? A: Yes, SN74CBT16211AGQLR supports hot-swapping, allowing for the insertion and removal of devices without disrupting the system.

  9. Q: What is the package type for SN74CBT16211AGQLR? A: SN74CBT16211AGQLR is available in a 56-pin VQFN (Very Thin Quad Flat No-Lead) package.

  10. Q: Are there any recommended application circuits or reference designs available for SN74CBT16211AGQLR? A: Yes, Texas Instruments provides application notes and reference designs that can help with the implementation of SN74CBT16211AGQLR in various technical solutions.

Please note that these answers are general and may vary depending on specific design requirements and use cases. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.