Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74CB3T3383PWR
Lihat Butiran Helaian data

SN74CB3T3383PWR

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Switching and Level Shifting
  • Characteristics: High-speed, Low-power consumption
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Multiplexer/Demultiplexer IC
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 10
  • Input Voltage Range: 1.65V to 5.5V
  • Output Voltage Range: 1.65V to 5.5V
  • On-state Resistance: 4Ω (typical)
  • Bandwidth: 500MHz (typical)
  • Supply Voltage Range: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74CB3T3383PWR has a total of 20 pins. The pin configuration is as follows:

  1. Channel 1 Input/Output
  2. Channel 1 Enable
  3. Channel 2 Input/Output
  4. Channel 2 Enable
  5. Channel 3 Input/Output
  6. Channel 3 Enable
  7. Channel 4 Input/Output
  8. Channel 4 Enable
  9. Channel 5 Input/Output
  10. Channel 5 Enable
  11. Ground
  12. Channel 6 Input/Output
  13. Channel 6 Enable
  14. Channel 7 Input/Output
  15. Channel 7 Enable
  16. Channel 8 Input/Output
  17. Channel 8 Enable
  18. Channel 9 Input/Output
  19. Channel 9 Enable
  20. VCC (Supply Voltage)

Functional Features

  • High-speed signal switching capability
  • Low power consumption
  • Wide input and output voltage range
  • Low on-state resistance for minimal signal distortion
  • ESD (Electrostatic Discharge) protection

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient signal switching - Low power consumption reduces energy usage - Wide voltage range compatibility enhances versatility - ESD protection ensures device durability

Disadvantages: - Limited number of channels may restrict certain applications - Relatively high on-state resistance compared to some alternatives

Working Principles

The SN74CB3T3383PWR is a multiplexer/demultiplexer IC that enables the selection and routing of signals between multiple input/output channels. It operates by controlling the enable pins to connect or disconnect the corresponding channels. The low on-state resistance ensures minimal signal distortion during switching.

Detailed Application Field Plans

The SN74CB3T3383PWR finds applications in various fields, including:

  1. Communication Systems: Signal routing and level shifting in telecommunication equipment.
  2. Data Acquisition: Multiplexing analog signals in data acquisition systems.
  3. Test and Measurement: Switching test signals in measurement instruments.
  4. Consumer Electronics: Audio/video signal routing in multimedia devices.
  5. Industrial Automation: Signal switching in control systems.

Detailed and Complete Alternative Models

  1. SN74CB3T3257PW - 4-Channel Multiplexer/Demultiplexer IC
  2. SN74CB3Q3245PW - 8-Bit Bus Switch IC
  3. SN74CBTLV3253PW - Dual 4-Channel Analog Multiplexer/Demultiplexer IC
  4. SN74CBTD3306PW - 10-Bit FET Bus Switch IC
  5. SN74CB3Q16211DGGR - 24-Bit FET Bus Switch IC

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74CB3T3383PWR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74CB3T3383PWR in technical solutions:

  1. Q: What is SN74CB3T3383PWR? A: SN74CB3T3383PWR is a high-bandwidth, low-power, 10-bit FET bus switch with configurable voltage translation capabilities.

  2. Q: What are the key features of SN74CB3T3383PWR? A: Some key features include low on-state resistance, wide voltage range support, bidirectional level shifting, and low power consumption.

  3. Q: What is the voltage range supported by SN74CB3T3383PWR? A: SN74CB3T3383PWR supports a voltage range from 1.2V to 3.6V.

  4. Q: Can SN74CB3T3383PWR be used for bidirectional level shifting? A: Yes, SN74CB3T3383PWR can be used for bidirectional level shifting between two voltage domains.

  5. Q: What is the maximum data rate supported by SN74CB3T3383PWR? A: SN74CB3T3383PWR supports a maximum data rate of 400 Mbps.

  6. Q: How many channels does SN74CB3T3383PWR have? A: SN74CB3T3383PWR has 10 channels, allowing it to switch multiple signals simultaneously.

  7. Q: Can SN74CB3T3383PWR be used in hot-swapping applications? A: Yes, SN74CB3T3383PWR supports hot-swapping, making it suitable for applications where devices need to be plugged/unplugged while the system is powered.

  8. Q: What is the on-state resistance of SN74CB3T3383PWR? A: The on-state resistance of SN74CB3T3383PWR is typically around 5 ohms.

  9. Q: Can SN74CB3T3383PWR be used in battery-powered applications? A: Yes, SN74CB3T3383PWR has low power consumption, making it suitable for battery-powered applications.

  10. Q: What package does SN74CB3T3383PWR come in? A: SN74CB3T3383PWR comes in a TSSOP-20 package, which is a small form factor suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with technical experts for detailed information.