Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74AHCT367PWG4
Lihat Butiran Helaian data

SN74AHCT367PWG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Shifter
  • Characteristics: High-speed, low-power consumption
  • Package: TSSOP-16
  • Essence: Hex Buffer/Driver with 3-State Outputs
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • High-Level Input Voltage: 2V to VCC
  • Low-Level Input Voltage: 0V to 0.8V
  • High-Level Output Voltage: 2.4V to VCC
  • Low-Level Output Voltage: 0V to 0.4V
  • Maximum Operating Frequency: 50MHz

Detailed Pin Configuration

The SN74AHCT367PWG4 has a TSSOP-16 package with the following pin configuration:

  1. OE (Output Enable) 1
  2. A1 (Input A1)
  3. Y1 (Output Y1)
  4. A2 (Input A2)
  5. Y2 (Output Y2)
  6. GND (Ground)
  7. Y3 (Output Y3)
  8. A3 (Input A3)
  9. Y4 (Output Y4)
  10. A4 (Input A4)
  11. Y5 (Output Y5)
  12. A5 (Input A5)
  13. Y6 (Output Y6)
  14. VCC (Supply Voltage)
  15. OE (Output Enable) 2
  16. GND (Ground)

Functional Features

  • Hex buffer/driver with 3-state outputs
  • Inputs are TTL-Voltage Compatible
  • Outputs can drive up to 10 LSTTL Loads
  • High-Speed Operation: tPD = 9 ns (typ) at VCC = 5V
  • Low Power Consumption: ICC = 4 µA (max) at TA = 25°C

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transfer - Low power consumption reduces energy usage - TTL-voltage compatibility ensures compatibility with various systems - Can drive multiple loads simultaneously

Disadvantages: - Limited operating frequency of 50MHz - Requires a supply voltage range of 4.5V to 5.5V

Working Principles

The SN74AHCT367PWG4 is a hex buffer/driver IC that provides 3-state outputs. It operates by receiving input signals and amplifying them to drive the corresponding output pins. The output enable (OE) pins control the state of the outputs, allowing them to be either active or in a high-impedance state.

Detailed Application Field Plans

The SN74AHCT367PWG4 is commonly used in various applications, including:

  1. Data communication systems
  2. Microprocessor-based systems
  3. Industrial automation
  4. Automotive electronics
  5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the SN74AHCT367PWG4 are:

  1. SN74AHCT125PW - Quad Buffer/Driver with 3-State Outputs
  2. SN74AHCT540PW - Octal Buffer/Driver with 3-State Outputs
  3. SN74AHCT573PW - Octal Transparent D-Type Latches with 3-State Outputs
  4. SN74AHCT595PW - 8-Bit Shift Registers with 3-State Outputs

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 389 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74AHCT367PWG4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74AHCT367PWG4:

  1. Q: What is SN74AHCT367PWG4? A: SN74AHCT367PWG4 is a high-speed hex buffer/driver with 3-state outputs, commonly used in digital logic applications.

  2. Q: What is the operating voltage range for SN74AHCT367PWG4? A: The operating voltage range for SN74AHCT367PWG4 is typically between 4.5V and 5.5V.

  3. Q: What is the maximum output current that SN74AHCT367PWG4 can drive? A: SN74AHCT367PWG4 can drive up to 8mA of output current per channel.

  4. Q: Can SN74AHCT367PWG4 be used as a level shifter? A: Yes, SN74AHCT367PWG4 can be used as a level shifter to convert signals between different voltage levels.

  5. Q: How many channels does SN74AHCT367PWG4 have? A: SN74AHCT367PWG4 has six independent buffer/driver channels.

  6. Q: What is the propagation delay of SN74AHCT367PWG4? A: The typical propagation delay of SN74AHCT367PWG4 is around 7ns.

  7. Q: Can SN74AHCT367PWG4 be used in bidirectional communication? A: No, SN74AHCT367PWG4 is a unidirectional buffer/driver and cannot be used for bidirectional communication.

  8. Q: Is SN74AHCT367PWG4 compatible with TTL logic levels? A: Yes, SN74AHCT367PWG4 is compatible with both TTL and CMOS logic levels.

  9. Q: What is the package type for SN74AHCT367PWG4? A: SN74AHCT367PWG4 comes in a TSSOP-16 package.

  10. Q: Can SN74AHCT367PWG4 be used in automotive applications? A: Yes, SN74AHCT367PWG4 is qualified for automotive applications and meets the necessary standards.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.