Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN74AC245IDWREP
Lihat Butiran Helaian data

SN74AC245IDWREP

Product Overview

  • Category: Integrated Circuit
  • Use: Level Shifter/Transceiver
  • Characteristics: High-speed, bidirectional, voltage-level translation
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Transfers data between different voltage domains
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2 V to 6 V
  • High-Level Input Voltage: 2 V to VCC
  • Low-Level Input Voltage: GND to 0.8 V
  • High-Level Output Voltage: VCC - 0.5 V
  • Low-Level Output Voltage: 0.4 V
  • Maximum Operating Frequency: 125 MHz
  • Number of Pins: 20

Detailed Pin Configuration

  1. DIR (Direction Control)
  2. OE (Output Enable)
  3. A1 (Data Input/Output)
  4. B1 (Data Input/Output)
  5. A2 (Data Input/Output)
  6. B2 (Data Input/Output)
  7. A3 (Data Input/Output)
  8. B3 (Data Input/Output)
  9. A4 (Data Input/Output)
  10. B4 (Data Input/Output)
  11. GND (Ground)
  12. B5 (Data Input/Output)
  13. A5 (Data Input/Output)
  14. B6 (Data Input/Output)
  15. A6 (Data Input/Output)
  16. B7 (Data Input/Output)
  17. A7 (Data Input/Output)
  18. B8 (Data Input/Output)
  19. A8 (Data Input/Output)
  20. VCC (Supply Voltage)

Functional Features

  • Bidirectional voltage-level translation between two voltage domains
  • Automatic direction control based on DIR pin
  • Output enable/disable control using OE pin
  • High-speed operation with minimal propagation delay
  • Supports voltage translation from 2 V to 6 V

Advantages and Disadvantages

Advantages

  • Enables communication between devices operating at different voltage levels
  • High-speed operation allows for efficient data transfer
  • Automatic direction control simplifies system design
  • Wide supply voltage range provides flexibility in various applications

Disadvantages

  • Limited to bidirectional voltage-level translation
  • Not suitable for applications requiring higher operating frequencies

Working Principles

The SN74AC245IDWREP is a level shifter/transceiver integrated circuit that facilitates the transfer of data between two voltage domains. It operates bidirectionally, allowing data to be transmitted in both directions. The direction of data flow is controlled by the DIR pin. When DIR is set to logic high, data is transferred from A-side to B-side, and when DIR is set to logic low, data is transferred from B-side to A-side.

The OE pin enables or disables the outputs of the device. When OE is set to logic high, the outputs are enabled, and when OE is set to logic low, the outputs are disabled. This feature allows for easy control of data transmission.

The SN74AC245IDWREP supports voltage translation between 2 V and 6 V, making it suitable for a wide range of applications. It operates at high speeds with minimal propagation delay, ensuring efficient data transfer.

Detailed Application Field Plans

The SN74AC245IDWREP is commonly used in electronic systems where data needs to be transferred between different voltage domains. Some specific application fields include:

  1. Microcontroller interfacing: The level shifter/transceiver can be used to interface microcontrollers operating at different voltage levels, enabling seamless communication between them.
  2. Communication systems: It can be employed in communication systems to facilitate data transfer between devices operating at different voltage levels, such as UART, SPI, or I2C interfaces.
  3. Industrial automation: The level shifter/transceiver can be utilized in industrial automation systems to enable communication between sensors, actuators, and control units operating at different voltage levels.

Detailed and Complete Alternative Models

  1. SN74LVC245APWR: Similar functionality with a lower supply voltage range (1.65 V to 5.5 V).
  2. SN74HCT245N: Compatible with TTL logic levels and operates at a wider temperature range (-40°C to 85°C).
  3. SN74LVCH245ADBR: Supports voltage translation from 1.2 V to 3.6 V and offers higher speed operation.

These alternative models provide similar functionality to the SN74AC245IDWREP but may have different specifications or features that suit specific application requirements.

Word count: 570 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN74AC245IDWREP dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN74AC245IDWREP:

  1. Question: What is SN74AC245IDWREP?
    Answer: SN74AC245IDWREP is a specific model of a bidirectional octal bus transceiver integrated circuit (IC) manufactured by Texas Instruments.

  2. Question: What is the purpose of SN74AC245IDWREP?
    Answer: SN74AC245IDWREP is used for bidirectional level shifting and voltage translation between different logic levels in digital circuits.

  3. Question: What is the operating voltage range of SN74AC245IDWREP?
    Answer: SN74AC245IDWREP operates within a voltage range of 2V to 6V.

  4. Question: How many bidirectional channels does SN74AC245IDWREP have?
    Answer: SN74AC245IDWREP has 8 bidirectional channels, allowing it to handle 8 bits of data simultaneously.

  5. Question: What is the maximum data transfer rate supported by SN74AC245IDWREP?
    Answer: SN74AC245IDWREP supports a maximum data transfer rate of 24 MHz.

  6. Question: Can SN74AC245IDWREP be used with both CMOS and TTL logic levels?
    Answer: Yes, SN74AC245IDWREP is compatible with both CMOS and TTL logic levels, making it versatile for various applications.

  7. Question: Does SN74AC245IDWREP have built-in protection against electrostatic discharge (ESD)?
    Answer: Yes, SN74AC245IDWREP has built-in ESD protection, which helps safeguard the IC from damage during handling and operation.

  8. Question: Can SN74AC245IDWREP be used in both parallel and serial communication systems?
    Answer: Yes, SN74AC245IDWREP can be used in both parallel and serial communication systems, depending on the specific application requirements.

  9. Question: What is the package type of SN74AC245IDWREP?
    Answer: SN74AC245IDWREP comes in a standard 20-pin SOIC (Small Outline Integrated Circuit) package.

  10. Question: Are there any recommended external components or circuitry to use with SN74AC245IDWREP?
    Answer: It is recommended to use decoupling capacitors near the power supply pins of SN74AC245IDWREP to ensure stable operation and minimize noise interference.

Please note that these answers are general and may vary based on specific application requirements.