Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SN65LVDS179MDGKREP
Lihat Butiran Helaian data

SN65LVDS179MDGKREP

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: LVDS Serializer/Deserializer
  • Characteristics:
    • High-speed data transmission
    • Low voltage differential signaling
    • Robust noise immunity
    • Small form factor
  • Package: MSOP-8 package
  • Essence: Converts parallel data to serial data and vice versa using LVDS technology
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage Range: 3V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 4
  • Input/Output Interface: LVCMOS/LVTTL compatible
  • ESD Protection: ±8kV HBM, ±1kV CDM

Pin Configuration

The SN65LVDS179MDGKREP has the following pin configuration:

Pin 1: VCC Pin 2: GND Pin 3: IN0 Pin 4: OUT0 Pin 5: IN1 Pin 6: OUT1 Pin 7: IN2 Pin 8: OUT2 Pin 9: IN3 Pin 10: OUT3

Functional Features

  • Converts parallel data to serial data and vice versa
  • Supports high-speed data transmission up to 400 Mbps
  • Utilizes LVDS technology for low power consumption and noise immunity
  • Compatible with LVCMOS/LVTTL interfaces
  • Provides ESD protection for enhanced reliability

Advantages and Disadvantages

Advantages

  • High-speed data transmission capability
  • Robust noise immunity
  • Low power consumption
  • Small form factor
  • ESD protection for enhanced reliability

Disadvantages

  • Limited number of channels (4)
  • Requires LVCMOS/LVTTL compatible interfaces

Working Principles

The SN65LVDS179MDGKREP operates by converting parallel data into serial data using Low Voltage Differential Signaling (LVDS) technology. It accepts parallel input data on the IN0 to IN3 pins and converts it into a high-speed serial output on the OUT0 to OUT3 pins. Similarly, it can receive serial input data and convert it back into parallel data.

LVDS technology utilizes differential signaling, where data is transmitted as voltage differences between two lines. This provides robust noise immunity and allows for high-speed data transmission over long distances while consuming low power.

Detailed Application Field Plans

The SN65LVDS179MDGKREP is commonly used in various applications, including:

  1. Display Technology: Used in LCD panels, LED displays, and digital signage for high-speed data transmission between display driver ICs and display modules.
  2. Video Transmission: Enables high-quality video transmission in applications such as video surveillance systems, medical imaging devices, and professional audio/video equipment.
  3. Automotive Electronics: Supports data communication in automotive infotainment systems, dashboard displays, and rear-seat entertainment systems.
  4. Industrial Automation: Facilitates reliable data transfer in industrial control systems, PLCs, and robotics.
  5. Communication Systems: Used in networking equipment, routers, and switches for high-speed data transmission between different components.

Detailed and Complete Alternative Models

  1. SN65LVDS180MDGKREP: Similar to SN65LVDS179MDGKREP but with 8 channels instead of 4.
  2. SN65LVDS182MDGKREP: LVDS Serializer/Deserializer with 2 channels and extended temperature range.
  3. SN65LVDS184MDGKREP: LVDS Serializer/Deserializer with 4 channels and higher data rate capability.

These alternative models offer similar functionality but may have different specifications or additional features to suit specific application requirements.

Word count: 400 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SN65LVDS179MDGKREP dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SN65LVDS179MDGKREP in technical solutions:

  1. Q: What is SN65LVDS179MDGKREP? A: SN65LVDS179MDGKREP is a high-speed differential line driver and receiver designed for applications that require high data rates and low power consumption.

  2. Q: What is the maximum data rate supported by SN65LVDS179MDGKREP? A: SN65LVDS179MDGKREP supports data rates up to 400 Mbps.

  3. Q: What is the operating voltage range of SN65LVDS179MDGKREP? A: SN65LVDS179MDGKREP operates from a supply voltage range of 3.0V to 3.6V.

  4. Q: Can SN65LVDS179MDGKREP be used in automotive applications? A: Yes, SN65LVDS179MDGKREP is suitable for automotive applications as it meets the AEC-Q100 standard.

  5. Q: Does SN65LVDS179MDGKREP support hot-plugging capability? A: Yes, SN65LVDS179MDGKREP supports hot-plugging, allowing for easy connection and disconnection of devices without causing damage.

  6. Q: What is the typical power consumption of SN65LVDS179MDGKREP? A: The typical power consumption of SN65LVDS179MDGKREP is around 20 mW.

  7. Q: Can SN65LVDS179MDGKREP be used in point-to-point or multipoint applications? A: SN65LVDS179MDGKREP can be used in both point-to-point and multipoint applications, making it versatile for various system designs.

  8. Q: What is the operating temperature range of SN65LVDS179MDGKREP? A: SN65LVDS179MDGKREP can operate within a temperature range of -40°C to +85°C.

  9. Q: Does SN65LVDS179MDGKREP have built-in ESD protection? A: Yes, SN65LVDS179MDGKREP has built-in ESD protection, ensuring robustness against electrostatic discharge events.

  10. Q: What package does SN65LVDS179MDGKREP come in? A: SN65LVDS179MDGKREP is available in a 48-pin VQFN (Very Thin Quad Flat No-Lead) package.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.