Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
DS36C280TMX
Lihat Butiran Helaian data

DS36C280TMX

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Conditioning and Data Transmission
  • Characteristics: High-speed, Low-power, Differential Line Driver/Receiver
  • Package: 16-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: DS36C280TMX is a versatile integrated circuit designed for signal conditioning and data transmission applications. It provides high-speed and low-power differential line driver/receiver functionality.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 1
  • Input Common Mode Voltage Range: -7V to +12V
  • Output Voltage Swing: ±2V
  • Propagation Delay: 2.5 ns
  • Power Dissipation: 20 mW

Detailed Pin Configuration

The DS36C280TMX has a total of 16 pins, each serving a specific function:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. RIN: Receiver input
  4. ROUT: Receiver output
  5. DE: Driver enable input
  6. DOUT: Driver output
  7. RE: Receiver enable input
  8. VREF: Reference voltage input
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • High-speed differential line driver/receiver
  • Low-power consumption
  • Wide input common mode voltage range
  • Built-in driver and receiver enable functionality
  • Reference voltage input for precise signal conditioning

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low power consumption - Versatile differential line driver/receiver functionality - Wide input common mode voltage range

Disadvantages: - Limited number of channels (only 1) - Output voltage swing is limited to ±2V

Working Principles

The DS36C280TMX operates by receiving differential signals through the RIN pin, which are then conditioned and amplified by the internal receiver. The conditioned signals are then available at the ROUT pin. On the other hand, the driver section accepts digital signals through the DOUT pin and converts them into differential output signals at the DE pin. The receiver and driver sections can be enabled or disabled using the RE and DE pins, respectively.

Detailed Application Field Plans

The DS36C280TMX finds applications in various fields, including:

  1. Industrial Automation: Used for high-speed data transmission in industrial control systems.
  2. Telecommunications: Enables reliable data transmission over long distances.
  3. Automotive Electronics: Facilitates communication between different electronic modules in vehicles.
  4. Medical Equipment: Provides robust signal conditioning for medical devices.
  5. Consumer Electronics: Used in audio/video equipment for high-quality signal transmission.

Detailed and Complete Alternative Models

  1. DS36C280TMT/NOPB: Similar specifications and features, available in a different package (8-pin SOIC).
  2. DS36C280TM/NOPB: Similar specifications and features, available in a different package (16-pin SOIC).
  3. DS36C280TMX/NOPB: Similar specifications and features, available in a different package (16-pin QFN).

(Note: The above alternative models are from the same manufacturer and offer comparable functionality.)

Word count: 442 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi DS36C280TMX dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of DS36C280TMX in technical solutions:

  1. Q: What is DS36C280TMX? A: DS36C280TMX is a high-speed differential line driver and receiver specifically designed for applications requiring ultra-low power consumption and high data rates.

  2. Q: What are the key features of DS36C280TMX? A: The key features of DS36C280TMX include low power consumption, high data rates up to 400 Mbps, wide operating voltage range, and compatibility with various transmission media.

  3. Q: In which applications can DS36C280TMX be used? A: DS36C280TMX can be used in various applications such as industrial automation, automotive systems, medical equipment, and communication systems.

  4. Q: How does DS36C280TMX achieve low power consumption? A: DS36C280TMX achieves low power consumption through its advanced design techniques, including power-down mode, reduced supply current, and optimized power management.

  5. Q: Can DS36C280TMX operate at high data rates? A: Yes, DS36C280TMX supports high data rates up to 400 Mbps, making it suitable for applications that require fast and reliable data transmission.

  6. Q: What is the operating voltage range of DS36C280TMX? A: DS36C280TMX has a wide operating voltage range from 3V to 5.5V, allowing it to be used with different power supply configurations.

  7. Q: Is DS36C280TMX compatible with different transmission media? A: Yes, DS36C280TMX is compatible with various transmission media such as twisted pair cables, coaxial cables, and printed circuit boards (PCBs).

  8. Q: Can DS36C280TMX be used in harsh environments? A: Yes, DS36C280TMX is designed to operate reliably in harsh environments, with features like ESD protection, wide temperature range, and robust construction.

  9. Q: Does DS36C280TMX support bidirectional communication? A: Yes, DS36C280TMX supports bidirectional communication, allowing data transmission in both directions simultaneously.

  10. Q: Are evaluation boards or reference designs available for DS36C280TMX? A: Yes, evaluation boards and reference designs are available for DS36C280TMX, which can help developers quickly prototype and integrate the chip into their applications.

Please note that these questions and answers are generic and may vary depending on specific requirements and use cases.