Taiwan Semiconductor Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
P6SMB8.2CA M4G
Lihat Butiran Helaian data

P6SMB8.2CA M4G

Product Overview

Category

The P6SMB8.2CA M4G belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is primarily used for surge protection in electronic circuits, providing a safeguard against voltage spikes and transients.

Characteristics

  • Voltage Suppression: Capable of suppressing voltage spikes and transients.
  • Fast Response Time: Rapid response to transient events.
  • Low Clamping Voltage: Provides effective protection without allowing excessive voltage levels.
  • Compact Package: Small form factor for easy integration into circuit designs.

Package

The P6SMB8.2CA M4G is typically available in a surface mount package, offering ease of installation and space efficiency.

Essence

The essence of the P6SMB8.2CA M4G lies in its ability to protect sensitive electronic components from voltage surges and transients, ensuring the reliability and longevity of electronic devices.

Packaging/Quantity

The P6SMB8.2CA M4G is commonly packaged in reels or tape and reel format, with quantities varying based on manufacturer specifications.

Specifications

  • Standoff Voltage: 7.37V to 8.63V
  • Peak Pulse Power: 600W
  • Operating Temperature Range: -55°C to +150°C
  • Breakdown Voltage: 8.2V
  • Reverse Standoff Voltage: 6.53V

Detailed Pin Configuration

The P6SMB8.2CA M4G features a standard SMC (DO-214AA) package with two pins for surface mount installation. The pin configuration includes anode and cathode connections for seamless integration into circuit layouts.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to protect downstream components.
  • Fast Response: Rapid reaction time to transient events, minimizing the risk of damage to connected devices.
  • Low Leakage Current: Ensures minimal power dissipation during normal operation.

Advantages and Disadvantages

Advantages

  • Effective surge protection for sensitive electronic components.
  • Fast response time to transient events.
  • Compact form factor for easy integration.

Disadvantages

  • Limited to specific voltage ranges.
  • May require additional components for comprehensive surge protection in complex circuits.

Working Principles

The P6SMB8.2CA M4G operates by diverting excess transient energy away from sensitive components, thereby limiting the voltage across the protected circuit. This is achieved through rapid conduction when the voltage exceeds the breakdown level, effectively shunting the excess energy to ground.

Detailed Application Field Plans

The P6SMB8.2CA M4G finds extensive application in various electronic systems, including: - Telecommunications: Protecting communication equipment from lightning-induced surges. - Consumer Electronics: Safeguarding sensitive components in TVs, computers, and home appliances. - Automotive Electronics: Providing surge protection in vehicle electrical systems. - Industrial Control Systems: Ensuring reliability in industrial automation and control applications.

Detailed and Complete Alternative Models

  • P6SMB6.8CA M4G: Lower breakdown voltage variant for specific application requirements.
  • P6SMB10CA M4G: Higher breakdown voltage variant for enhanced surge protection.

In conclusion, the P6SMB8.2CA M4G transient voltage suppressor diode offers effective surge protection, fast response time, and compact packaging, making it a valuable component in safeguarding electronic circuits against transient events.

Word Count: 511

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P6SMB8.2CA M4G dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of P6SMB8.2CA M4G in technical solutions:

  1. What is the voltage rating of P6SMB8.2CA M4G?

    • The voltage rating of P6SMB8.2CA M4G is 8.2V.

  2. What is the peak pulse power of P6SMB8.2CA M4G?

    • The peak pulse power of P6SMB8.2CA M4G is typically 600W at 10/1000μs.

  3. What is the breakdown voltage of P6SMB8.2CA M4G?

    • The breakdown voltage of P6SMB8.2CA M4G is 9.11V to 10.5V.

  4. What is the maximum clamping voltage of P6SMB8.2CA M4G?

    • The maximum clamping voltage of P6SMB8.2CA M4G is 13.4V at 10A.

  5. What is the operating temperature range of P6SMB8.2CA M4G?

    • The operating temperature range of P6SMB8.2CA M4G is -55°C to +150°C.

  6. What is the package type of P6SMB8.2CA M4G?

    • P6SMB8.2CA M4G comes in a DO-214AA (SMB) package.

  7. What are the typical applications for P6SMB8.2CA M4G?

    • P6SMB8.2CA M4G is commonly used in protection of sensitive electronic equipment from voltage transients induced by lightning or other transient voltage events.

  8. What are the key features of P6SMB8.2CA M4G?

    • Some key features of P6SMB8.2CA M4G include low incremental surge resistance, fast response time, and high reliability.

  9. How should P6SMB8.2CA M4G be mounted on a PCB?

    • P6SMB8.2CA M4G should be mounted with the cathode side connected to the ground plane of the PCB for effective transient voltage suppression.

  10. What are the industry standards that P6SMB8.2CA M4G complies with?

    • P6SMB8.2CA M4G complies with industry standards such as AEC-Q101 for automotive applications and RoHS for environmental compliance.

I hope these questions and answers are helpful for your technical solutions! If you have any more specific questions, feel free to ask.