STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TS924AIPT
Lihat Butiran Helaian data

TS924AIPT

Product Overview

Category

TS924AIPT belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for amplification and signal processing.

Characteristics

  • High gain and low noise characteristics
  • Wide frequency response range
  • Low power consumption
  • Compact size

Package

TS924AIPT is available in a small outline package (SOP) format.

Essence

The essence of TS924AIPT lies in its ability to amplify weak signals while maintaining high fidelity.

Packaging/Quantity

TS924AIPT is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer.

Specifications

  • Supply Voltage: 2.5V to 5.5V
  • Input Offset Voltage: ±1mV
  • Gain Bandwidth Product: 3MHz
  • Slew Rate: 1V/µs
  • Input Bias Current: 10nA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

TS924AIPT has a total of 8 pins, which are labeled as follows:

  1. VCC: Power supply input
  2. IN+: Non-inverting input
  3. IN-: Inverting input
  4. OUT: Output
  5. NC: No connection
  6. NC: No connection
  7. GND: Ground
  8. NC: No connection

Functional Features

  • High voltage gain
  • Low input offset voltage
  • Rail-to-rail output swing
  • Unity-gain stable
  • Internal frequency compensation

Advantages and Disadvantages

Advantages

  • High gain allows for amplification of weak signals
  • Low noise ensures minimal distortion in the amplified signal
  • Wide frequency response accommodates a variety of applications
  • Low power consumption prolongs battery life in portable devices

Disadvantages

  • Limited output current capability
  • Not suitable for high-power applications

Working Principles

TS924AIPT operates based on the principles of operational amplifiers. It amplifies the difference between the non-inverting and inverting input voltages, producing an amplified output signal.

Detailed Application Field Plans

TS924AIPT finds application in various electronic devices, including but not limited to: - Audio amplifiers - Instrumentation amplifiers - Active filters - Signal conditioners - Sensor interfaces

Detailed and Complete Alternative Models

  1. LM324: Quad Operational Amplifier
  2. TL072: Dual JFET Input Operational Amplifier
  3. AD822: Precision Instrumentation Amplifier
  4. MCP6002: Dual Op-Amp with Rail-to-Rail Output

These alternative models offer similar functionality and can be used as substitutes for TS924AIPT in different applications.

Word count: 345 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TS924AIPT dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TS924AIPT in technical solutions:

  1. Question: What is TS924AIPT?
    Answer: TS924AIPT is a specific model of operational amplifier (op-amp) integrated circuit commonly used in electronic circuits.

  2. Question: What are the key features of TS924AIPT?
    Answer: The key features of TS924AIPT include low noise, low offset voltage, low power consumption, and rail-to-rail input/output capability.

  3. Question: In what applications can TS924AIPT be used?
    Answer: TS924AIPT can be used in various applications such as audio amplifiers, signal conditioning circuits, active filters, and sensor interfaces.

  4. Question: What is the supply voltage range for TS924AIPT?
    Answer: The supply voltage range for TS924AIPT is typically between 2.7V and 5.5V.

  5. Question: What is the maximum output current of TS924AIPT?
    Answer: The maximum output current of TS924AIPT is typically around 60mA.

  6. Question: Can TS924AIPT operate in single-supply configurations?
    Answer: Yes, TS924AIPT can operate in both single-supply and dual-supply configurations.

  7. Question: What is the input bias current of TS924AIPT?
    Answer: The input bias current of TS924AIPT is typically around 1pA.

  8. Question: Does TS924AIPT have built-in protection features?
    Answer: Yes, TS924AIPT has built-in protection features such as short-circuit protection and thermal shutdown.

  9. Question: What is the typical gain bandwidth product of TS924AIPT?
    Answer: The typical gain bandwidth product of TS924AIPT is around 1MHz.

  10. Question: Can TS924AIPT be used in low-power applications?
    Answer: Yes, TS924AIPT is suitable for low-power applications due to its low power consumption and wide supply voltage range.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.