STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TS27M4CD
Lihat Butiran Helaian data

TS27M4CD

Product Overview

  • Category: Integrated Circuit
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Op-Amp
  • Package: SOIC-14
  • Essence: The TS27M4CD is a low-power quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.

Specifications

  • Supply Voltage: ±2.5V to ±16V
  • Input Offset Voltage: 3mV (maximum)
  • Input Bias Current: 1pA (typical)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.5V/µs (typical)
  • Input Common Mode Voltage Range: -0.3V to Vcc+0.3V
  • Output Voltage Swing: -Vs+1.5V to Vcc-1.5V

Detailed Pin Configuration

The TS27M4CD has a standard pin configuration as follows:

___________ Vcc | 1 14 | Vcc+ In1 | 2 13 | Out1 In2 | 3 12 | Out2 In3 | 4 11 | Out3 In4 | 5 10 | Out4 Gnd | 6 9 | N/C N/C | 7 8 | N/C ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Low power consumption: The TS27M4CD operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered applications.
  • Rail-to-rail input/output: The operational amplifier supports input and output signals that can swing close to the supply rails, maximizing the dynamic range.
  • Quad Op-Amp: The TS27M4CD integrates four independent operational amplifiers in a single package, providing flexibility and space-saving benefits.

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices.
  • Rail-to-rail input/output allows for accurate signal amplification even at the extremes of the supply voltage.
  • Four op-amps in one package provide cost and space savings.

Disadvantages

  • Limited gain bandwidth product compared to higher-performance op-amps.
  • Slew rate may be insufficient for high-speed applications.

Working Principles

The TS27M4CD is based on a CMOS technology, which enables low-power operation. It utilizes a differential input stage followed by a gain stage and an output buffer. The internal circuitry ensures stability and performance across various operating conditions.

Detailed Application Field Plans

The TS27M4CD is suitable for a wide range of applications, including but not limited to: - Signal conditioning and amplification - Active filters - Sensor interfaces - Battery-powered instrumentation - Audio amplification

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TS27M4CD are: - LM324: A quad operational amplifier with low power consumption and rail-to-rail input/output. - MCP6004: Another quad op-amp featuring low power consumption and rail-to-rail operation. - TL074: A quad JFET-input operational amplifier with low noise and high slew rate.

These alternatives can be considered based on specific application requirements and availability.

Word count: 345 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TS27M4CD dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TS27M4CD in technical solutions:

  1. Q: What is TS27M4CD? A: TS27M4CD is a specific model of operational amplifier (op-amp) commonly used in various technical applications.

  2. Q: What are the key features of TS27M4CD? A: Some key features of TS27M4CD include low input offset voltage, low input bias current, wide bandwidth, and rail-to-rail output swing.

  3. Q: In what applications can TS27M4CD be used? A: TS27M4CD can be used in a wide range of applications such as signal conditioning, amplification, filtering, and sensor interfacing.

  4. Q: What is the supply voltage range for TS27M4CD? A: The supply voltage range for TS27M4CD typically ranges from 2.7V to 16V.

  5. Q: Can TS27M4CD operate with a single power supply? A: Yes, TS27M4CD can operate with a single power supply, making it suitable for battery-powered applications.

  6. Q: What is the typical input offset voltage of TS27M4CD? A: The typical input offset voltage of TS27M4CD is around 1mV.

  7. Q: Does TS27M4CD have built-in protection features? A: Yes, TS27M4CD has built-in protection features like short-circuit protection and thermal shutdown.

  8. Q: What is the maximum output current of TS27M4CD? A: The maximum output current of TS27M4CD is typically around 40mA.

  9. Q: Can TS27M4CD operate in high-temperature environments? A: Yes, TS27M4CD is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  10. Q: Is TS27M4CD available in different package options? A: Yes, TS27M4CD is available in various package options such as SO-14, TSSOP-14, and DFN-8.

Please note that the specific details may vary depending on the manufacturer's datasheet and specifications.