STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ST75285CTR
Lihat Butiran Helaian data

ST75285CTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Communication and Control Systems
  • Characteristics: Low-power, High-speed, Robust
  • Package: SOIC-8
  • Essence: Transceiver IC for RS-485/RS-422 Applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Data Rate: Up to 20 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 8
  • Interface: RS-485/RS-422

Detailed Pin Configuration

  1. A: Non-Inverting Driver Output A
  2. B: Inverting Driver Output B
  3. Y: Receiver Output
  4. Z: Receiver Output
  5. GND: Ground
  6. BIAS: Bias Resistor Connection
  7. VCC: Supply Voltage
  8. REN: Receiver Enable

Functional Features

  • Supports Half-Duplex Communication
  • Allows Multiple Transceivers on the Bus
  • Built-in Short-Circuit Protection
  • Low Power Consumption in Shutdown Mode
  • Wide Common-Mode Voltage Range
  • Enhanced ESD Protection

Advantages

  • High-Speed Data Transmission
  • Robust Performance in Noisy Environments
  • Easy Integration into Existing Systems
  • Low Power Consumption
  • Reliable Short-Circuit Protection

Disadvantages

  • Limited to RS-485/RS-422 Applications
  • Requires External Bias Resistors
  • Not Suitable for Full-Duplex Communication

Working Principles

The ST75285CTR is a transceiver IC designed for RS-485/RS-422 communication systems. It provides a bidirectional interface between a microcontroller or other digital logic and the differential bus used in these applications. The IC incorporates drivers and receivers to enable reliable data transmission over long distances, even in noisy environments. It operates on a supply voltage of 4.5V to 5.5V and supports data rates up to 20 Mbps.

Detailed Application Field Plans

The ST75285CTR is widely used in various industrial automation systems, building automation, HVAC control, access control, security systems, and other applications that require robust and high-speed communication over long distances. Its ability to support multiple transceivers on the bus makes it suitable for networked systems where multiple devices need to communicate with each other.

Detailed and Complete Alternative Models

  • MAX485
  • SN75176
  • LTC485
  • ADM485
  • SP485

These alternative models offer similar functionality and are commonly used in RS-485/RS-422 applications. However, it is important to review their specifications and pin configurations to ensure compatibility with specific system requirements.

Word count: 305 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ST75285CTR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ST75285CTR in technical solutions:

  1. Q: What is ST75285CTR? A: ST75285CTR is a transceiver IC (Integrated Circuit) commonly used for RS-485 communication in industrial applications.

  2. Q: What is RS-485 communication? A: RS-485 is a standard for serial communication that allows multiple devices to communicate over long distances using differential signaling.

  3. Q: What are the key features of ST75285CTR? A: Some key features of ST75285CTR include low power consumption, high data rates, wide supply voltage range, and built-in protection against electrical transients.

  4. Q: What is the maximum data rate supported by ST75285CTR? A: ST75285CTR supports data rates up to 20 Mbps, making it suitable for high-speed communication requirements.

  5. Q: Can ST75285CTR be used in half-duplex or full-duplex mode? A: Yes, ST75285CTR can be used in both half-duplex and full-duplex modes, depending on the specific application requirements.

  6. Q: How far can ST75285CTR transmit data? A: The transmission distance of ST75285CTR depends on various factors such as cable quality, data rate, and noise levels. In general, it can support distances up to several hundred meters.

  7. Q: Does ST75285CTR require external components for operation? A: Yes, ST75285CTR requires external components such as termination resistors, capacitors, and biasing resistors for proper operation.

  8. Q: Is ST75285CTR compatible with other RS-485 transceivers? A: Yes, ST75285CTR is compatible with other RS-485 transceivers that adhere to the same standard, allowing for interoperability between different devices.

  9. Q: Can ST75285CTR be used in harsh industrial environments? A: Yes, ST75285CTR is designed to operate reliably in harsh industrial environments, with features like overvoltage protection and ESD (Electrostatic Discharge) protection.

  10. Q: Are there any application examples where ST75285CTR is commonly used? A: Yes, ST75285CTR is commonly used in various applications such as industrial automation, building automation, HVAC systems, access control, and energy management systems.

Please note that these answers are general and may vary depending on specific implementation requirements.