STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ST72F561J9T3
Lihat Butiran Helaian data

ST72F561J9T3

Product Overview

Category

The ST72F561J9T3 belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • High-performance 8-bit microcontroller
  • Low power consumption
  • Integrated memory and peripherals
  • Wide operating voltage range
  • Enhanced security features

Package

The ST72F561J9T3 is available in a compact and durable package, suitable for surface mount technology (SMT) applications.

Essence

The essence of the ST72F561J9T3 lies in its ability to provide efficient and reliable control and processing capabilities in a wide range of electronic systems.

Packaging/Quantity

The microcontroller is typically packaged in reels or trays, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Frequency: Up to 16 MHz
  • Program Memory Size: 60 KB Flash
  • Data Memory Size: 2 KB RAM
  • Operating Voltage Range: 2.7V to 5.5V
  • Number of I/O Pins: 32
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 4
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ST72F561J9T3 microcontroller has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. PA0 - General-purpose I/O pin
  4. PA1 - General-purpose I/O pin
  5. PA2 - General-purpose I/O pin
  6. PA3 - General-purpose I/O pin
  7. PA4 - General-purpose I/O pin
  8. PA5 - General-purpose I/O pin
  9. PA6 - General-purpose I/O pin
  10. PA7 - General-purpose I/O pin
  11. PB0 - General-purpose I/O pin
  12. PB1 - General-purpose I/O pin
  13. PB2 - General-purpose I/O pin
  14. PB3 - General-purpose I/O pin
  15. PB4 - General-purpose I/O pin
  16. PB5 - General-purpose I/O pin
  17. PB6 - General-purpose I/O pin
  18. PB7 - General-purpose I/O pin
  19. PC0 - General-purpose I/O pin
  20. PC1 - General-purpose I/O pin
  21. PC2 - General-purpose I/O pin
  22. PC3 - General-purpose I/O pin
  23. PC4 - General-purpose I/O pin
  24. PC5 - General-purpose I/O pin
  25. PC6 - General-purpose I/O pin
  26. PC7 - General-purpose I/O pin
  27. PD0 - General-purpose I/O pin
  28. PD1 - General-purpose I/O pin
  29. PD2 - General-purpose I/O pin
  30. PD3 - General-purpose I/O pin
  31. RESET - Reset pin
  32. OSCIN/OSCOUT - Oscillator input/output pins

Functional Features

The ST72F561J9T3 microcontroller offers several functional features, including:

  • High-speed processing capabilities
  • On-chip memory for program storage and data handling
  • Multiple communication interfaces for seamless integration with other devices
  • Timers/counters for precise timing and event management
  • Analog-to-digital converter for analog signal processing
  • Enhanced security features to protect sensitive data

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture
  • Low power consumption for energy-efficient designs
  • Wide operating voltage range allows flexibility in power supply selection
  • Integrated memory and peripherals reduce external component count
  • Enhanced security features ensure data integrity and protection

Disadvantages

  • Limited program memory size compared to higher-end microcontrollers
  • Relatively fewer I/O pins for complex applications
  • May require additional external components for specific functionalities not integrated on-chip

Working Principles

The ST72F561J9T3 operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with peripherals and external devices through various communication interfaces, and performs calculations and control tasks according to the programmed logic.

Detailed Application Field Plans

The ST72F561J9T3 microcontroller finds application in various fields, including but not limited to:

  1. Industrial automation systems
  2. Consumer electronics
  3. Automotive electronics
  4. Medical devices
  5. Home automation
  6. Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ST72F561J9T3 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ST72F561J9T3 in technical solutions:

  1. Q: What is the ST72F561J9T3 microcontroller used for? A: The ST72F561J9T3 microcontroller is commonly used in various technical solutions, including industrial automation, consumer electronics, automotive applications, and more.

  2. Q: What is the maximum clock frequency supported by the ST72F561J9T3? A: The ST72F561J9T3 microcontroller supports a maximum clock frequency of 8 MHz.

  3. Q: How much flash memory does the ST72F561J9T3 have? A: The ST72F561J9T3 microcontroller has 60 KB of flash memory.

  4. Q: Can I use the ST72F561J9T3 for real-time applications? A: Yes, the ST72F561J9T3 microcontroller can be used for real-time applications as it has built-in timers and interrupt capabilities.

  5. Q: Does the ST72F561J9T3 support analog-to-digital conversion (ADC)? A: Yes, the ST72F561J9T3 microcontroller has an integrated 8-channel 10-bit ADC for analog signal processing.

  6. Q: What communication interfaces are available on the ST72F561J9T3? A: The ST72F561J9T3 microcontroller supports UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface) communication interfaces.

  7. Q: Can I program the ST72F561J9T3 using C language? A: Yes, the ST72F561J9T3 microcontroller can be programmed using C language with the help of an appropriate Integrated Development Environment (IDE) and compiler.

  8. Q: What is the operating voltage range for the ST72F561J9T3? A: The ST72F561J9T3 microcontroller operates within a voltage range of 2.7V to 5.5V.

  9. Q: Does the ST72F561J9T3 have any built-in security features? A: Yes, the ST72F561J9T3 microcontroller provides hardware security features like read-out protection and write protection for flash memory.

  10. Q: Can I use the ST72F561J9T3 in battery-powered applications? A: Yes, the low power consumption characteristics of the ST72F561J9T3 make it suitable for battery-powered applications, extending the battery life.

Please note that these answers are general and may vary depending on specific application requirements and implementation details.