STMicroelectronics
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
L6392DTR
Lihat Butiran Helaian data

L6392DTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor driver
  • Characteristics: High voltage, high-speed gate driver
  • Package: SOIC-8
  • Essence: Power MOSFET and IGBT driver
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage: 10V to 20V
  • Output Current: 1.5A
  • Operating Temperature Range: -40°C to +125°C
  • Input Logic Compatibility: CMOS/TTL

Detailed Pin Configuration

The L6392DTR IC has the following pin configuration:

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. IN: Input control signal
  4. SD: Shutdown input
  5. HO: High-side gate driver output
  6. LO: Low-side gate driver output
  7. VS: High-side floating supply voltage
  8. COM: Common connection for low-side and high-side drivers

Functional Features

  • High voltage capability up to 600V
  • Fast switching speed for efficient motor control
  • Integrated bootstrap diode for simplified circuit design
  • Undervoltage lockout protection
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages: - High voltage capability allows driving of various types of motors - Fast switching speed enables precise motor control - Integrated bootstrap diode simplifies circuit design - Comprehensive protection features ensure safe operation

Disadvantages: - Limited output current may not be suitable for high-power applications - Restricted operating temperature range may limit certain industrial applications

Working Principles

The L6392DTR is a high-voltage gate driver designed to control power MOSFETs and IGBTs in motor drive applications. It operates by receiving input control signals and generating high and low-side gate driver outputs to drive the power devices. The integrated bootstrap diode simplifies the circuit design by providing the necessary voltage for the high-side driver. The IC also incorporates various protection features such as undervoltage lockout, overcurrent protection, and thermal shutdown to ensure safe operation.

Detailed Application Field Plans

The L6392DTR is commonly used in the following application fields:

  1. Electric vehicle (EV) motor drives
  2. Industrial automation systems
  3. HVAC (Heating, Ventilation, and Air Conditioning) systems
  4. Robotics
  5. Renewable energy systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the L6392DTR are:

  1. IR2104S: High and low-side driver with similar specifications
  2. TC4427: Low-side driver with lower voltage capability
  3. DRV8301: Three-phase motor driver with advanced features
  4. HIP4081A: High-voltage driver with higher output current capability

These alternative models provide different features and specifications, allowing users to choose the most suitable option based on their specific requirements.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi L6392DTR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of L6392DTR in technical solutions:

  1. Q: What is L6392DTR? A: L6392DTR is a high-voltage gate driver IC designed for driving N-channel power MOSFETs or IGBTs in half-bridge or full-bridge configurations.

  2. Q: What is the maximum operating voltage of L6392DTR? A: The maximum operating voltage of L6392DTR is 600V.

  3. Q: Can L6392DTR be used with both MOSFETs and IGBTs? A: Yes, L6392DTR can be used with both MOSFETs and IGBTs.

  4. Q: What is the maximum output current capability of L6392DTR? A: The maximum output current capability of L6392DTR is typically 0.6A.

  5. Q: Does L6392DTR have built-in protection features? A: Yes, L6392DTR has built-in protection features such as undervoltage lockout (UVLO), thermal shutdown, and overcurrent protection.

  6. Q: Can L6392DTR operate at high temperatures? A: Yes, L6392DTR has a wide operating temperature range of -40°C to 150°C, making it suitable for high-temperature applications.

  7. Q: What is the recommended input voltage range for L6392DTR? A: The recommended input voltage range for L6392DTR is typically between 8V and 14V.

  8. Q: Can L6392DTR be used in automotive applications? A: Yes, L6392DTR is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Q: Does L6392DTR support adjustable dead-time control? A: Yes, L6392DTR supports adjustable dead-time control to prevent shoot-through current in half-bridge or full-bridge configurations.

  10. Q: What is the package type of L6392DTR? A: L6392DTR is available in a small outline package (SOIC-8) for easy integration into various circuit designs.

Please note that these answers are general and may vary depending on the specific application and requirements.