SSI Technologies Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
P51-75-S-A-P-20MA-000-000
Lihat Butiran Helaian data

P51-75-S-A-P-20MA-000-000

Basic Information Overview

Category

The P51-75-S-A-P-20MA-000-000 belongs to the category of industrial sensors.

Use

It is used for measuring and monitoring pressure in various industrial applications.

Characteristics

  • High accuracy
  • Robust construction
  • Wide operating temperature range
  • Long-term stability

Package

The sensor is typically housed in a durable casing suitable for industrial environments.

Essence

The essence of the P51-75-S-A-P-20MA-000-000 lies in its ability to provide precise and reliable pressure measurements.

Packaging/Quantity

The sensor is usually packaged individually and is available in varying quantities based on customer requirements.

Specifications

  • Pressure Range: 0-75 psi
  • Output: 4-20 mA
  • Operating Temperature: -40°C to 125°C
  • Accuracy: ±0.5% full scale
  • Supply Voltage: 10-30 VDC

Detailed Pin Configuration

The detailed pin configuration of the P51-75-S-A-P-20MA-000-000 is as follows: - Pin 1: Power supply - Pin 2: Ground - Pin 3: Signal output

Functional Features

  • High precision pressure measurement
  • Compatibility with industrial control systems
  • Long-term reliability
  • Easy integration into existing setups

Advantages

  • Accurate and stable pressure readings
  • Suitable for harsh industrial environments
  • Low maintenance requirements
  • Wide operating temperature range

Disadvantages

  • Relatively higher cost compared to some alternatives
  • May require specialized expertise for installation and calibration

Working Principles

The P51-75-S-A-P-20MA-000-000 operates on the principle of converting applied pressure into an electrical signal, which is then transmitted as a 4-20 mA output proportional to the pressure being measured.

Detailed Application Field Plans

The P51-75-S-A-P-20MA-000-000 is commonly used in the following application fields: - Industrial automation - Hydraulic systems - Pneumatic systems - Process control

Detailed and Complete Alternative Models

Some alternative models to the P51-75-S-A-P-20MA-000-000 include: - P51-100-S-A-P-20MA-000-000 - P51-50-S-A-P-20MA-000-000 - P51-75-S-B-P-20MA-000-000

In conclusion, the P51-75-S-A-P-20MA-000-000 is a highly reliable and accurate industrial sensor designed for precise pressure measurement in various industrial applications. Its robust construction, wide operating temperature range, and compatibility with industrial control systems make it a preferred choice for many industrial processes. While it may have some disadvantages such as higher cost and specialized installation requirements, its advantages far outweigh these limitations, making it an essential component in industrial automation and control systems.

[Word Count: 420]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P51-75-S-A-P-20MA-000-000 dalam penyelesaian teknikal

  1. What is the P51-75-S-A-P-20MA-000-000 sensor used for?

    • The P51-75-S-A-P-20MA-000-000 sensor is commonly used for measuring pressure in technical solutions.

  2. What is the operating range of the P51-75-S-A-P-20MA-000-000 sensor?

    • The operating range of the P51-75-S-A-P-20MA-000-000 sensor is typically from 0 to 75 psi.

  3. Can the P51-75-S-A-P-20MA-000-000 sensor be used in high-temperature environments?

    • Yes, the P51-75-S-A-P-20MA-000-000 sensor is designed to operate in high-temperature environments.

  4. What is the output signal of the P51-75-S-A-P-20MA-000-000 sensor?

    • The P51-75-S-A-P-20MA-000-000 sensor typically provides a 4-20mA output signal.

  5. Is the P51-75-S-A-P-20MA-000-000 sensor suitable for use with corrosive fluids?

    • Yes, the P51-75-S-A-P-20MA-000-000 sensor is often suitable for use with corrosive fluids due to its robust construction.

  6. What are the typical applications of the P51-75-S-A-P-20MA-000-000 sensor?

    • Typical applications of the P51-75-S-A-P-20MA-000-000 sensor include industrial process control, hydraulic systems, and pneumatic systems.

  7. Does the P51-75-S-A-P-20MA-000-000 sensor require calibration?

    • Yes, the P51-75-S-A-P-20MA-000-000 sensor may require periodic calibration to ensure accurate measurements.

  8. Can the P51-75-S-A-P-20MA-000-000 sensor be submerged in liquids?

    • The P51-75-S-A-P-20MA-000-000 sensor is not typically designed for submersion in liquids and should be used in applications where it will not be fully submerged.

  9. What is the response time of the P51-75-S-A-P-20MA-000-000 sensor?

    • The response time of the P51-75-S-A-P-20MA-000-000 sensor is typically fast, allowing for real-time pressure measurements.

  10. Is the P51-75-S-A-P-20MA-000-000 sensor compatible with standard industrial interfaces?

    • Yes, the P51-75-S-A-P-20MA-000-000 sensor is often compatible with standard industrial interfaces, making it easy to integrate into existing systems.