SSI Technologies Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
P51-500-S-R-MD-20MA-000-000
Lihat Butiran Helaian data

P51-500-S-R-MD-20MA-000-000

Product Overview

Category

The P51-500-S-R-MD-20MA-000-000 belongs to the category of pressure sensors.

Use

It is used for measuring and monitoring pressure in various industrial and commercial applications.

Characteristics

  • High accuracy
  • Wide operating temperature range
  • Compact size
  • Robust construction

Package

The sensor is typically packaged in a durable housing suitable for industrial environments.

Essence

The essence of the P51-500-S-R-MD-20MA-000-000 lies in its ability to provide precise and reliable pressure measurements.

Packaging/Quantity

The sensor is usually available as a single unit or in bulk quantities, depending on the supplier.

Specifications

  • Pressure Range: 0-500 psi
  • Output: 4-20 mA
  • Operating Temperature: -40°C to 125°C
  • Supply Voltage: 10-30 VDC
  • Accuracy: ±0.5% full scale
  • Electrical Connection: M12 connector

Detailed Pin Configuration

The detailed pin configuration of the P51-500-S-R-MD-20MA-000-000 is as follows: 1. Power supply (+) 2. Power supply (-) 3. Signal output 4. Not connected

Functional Features

  • Linear output proportional to pressure
  • Overpressure protection
  • Long-term stability
  • Easy installation and integration

Advantages

  • High accuracy and reliability
  • Suitable for harsh environments
  • Low power consumption
  • Easy to interface with control systems

Disadvantages

  • Limited pressure range
  • Higher initial cost compared to some alternatives
  • May require periodic calibration

Working Principles

The P51-500-S-R-MD-20MA-000-000 operates based on the principle of piezoresistive sensing, where changes in pressure cause a corresponding change in electrical resistance, which is then converted into a 4-20 mA output signal.

Detailed Application Field Plans

The P51-500-S-R-MD-20MA-000-000 is commonly used in the following applications: - Hydraulic systems - Industrial machinery - Process control - HVAC systems - Automotive testing

Detailed and Complete Alternative Models

Some alternative models to the P51-500-S-R-MD-20MA-000-000 include: - P51-100-S-N-I12-4.5-00-000 - P51-100-A-P-I36-4.5-00-000 - P51-2000-B-A-I36-4.5-00-000

In conclusion, the P51-500-S-R-MD-20MA-000-000 is a high-precision pressure sensor with a wide range of industrial and commercial applications. Its robust construction, accurate measurements, and ease of integration make it a valuable component in various systems.

[Word count: 411]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P51-500-S-R-MD-20MA-000-000 dalam penyelesaian teknikal

  1. What is the P51-500-S-R-MD-20MA-000-000 sensor used for?

    • The P51-500-S-R-MD-20MA-000-000 sensor is a pressure transducer commonly used to measure and monitor pressure in various technical applications.

  2. What is the operating range of the P51-500-S-R-MD-20MA-000-000 sensor?

    • The operating range of the P51-500-S-R-MD-20MA-000-000 sensor typically spans from 0 to 500 psi, making it suitable for a wide range of pressure measurement needs.

  3. What are the output options for the P51-500-S-R-MD-20MA-000-000 sensor?

    • The P51-500-S-R-MD-20MA-000-000 sensor typically provides a 4-20mA output signal, which is commonly used in industrial control systems.

  4. Is the P51-500-S-R-MD-20MA-000-000 sensor suitable for use in harsh environments?

    • Yes, the P51-500-S-R-MD-20MA-000-000 sensor is designed to withstand harsh environmental conditions, including high temperatures and corrosive atmospheres.

  5. Can the P51-500-S-R-MD-20MA-000-000 sensor be used for both liquids and gases?

    • Yes, the P51-500-S-R-MD-20MA-000-000 sensor is suitable for measuring pressure in both liquid and gas media.

  6. What is the accuracy of the P51-500-S-R-MD-20MA-000-000 sensor?

    • The P51-500-S-R-MD-20MA-000-000 sensor typically offers high accuracy, with values ranging from 0.25% to 0.5% of full scale, depending on the specific model.

  7. Does the P51-500-S-R-MD-20MA-000-000 sensor require calibration?

    • Yes, like most pressure sensors, the P51-500-S-R-MD-20MA-000-000 sensor should be calibrated periodically to ensure accurate and reliable measurements.

  8. What are the typical applications for the P51-500-S-R-MD-20MA-000-000 sensor?

    • The P51-500-S-R-MD-20MA-000-000 sensor is commonly used in hydraulic systems, industrial machinery, process control, and automotive applications.

  9. Is the P51-500-S-R-MD-20MA-000-000 sensor compatible with standard industrial interfaces?

    • Yes, the P51-500-S-R-MD-20MA-000-000 sensor is often equipped with standard electrical connections and mounting options to facilitate integration into industrial systems.

  10. What are the key considerations for installing and maintaining the P51-500-S-R-MD-20MA-000-000 sensor?

    • Proper installation techniques, regular inspection for damage or contamination, and adherence to manufacturer guidelines for maintenance and cleaning are essential for ensuring optimal performance of the P51-500-S-R-MD-20MA-000-000 sensor.