RLZTE-116.8B Product Overview
Category: Electronic Component
Use: RLZTE-116.8B is a zener diode designed for voltage regulation and protection in electronic circuits.
Characteristics: This zener diode has a voltage rating of 116.8V, low leakage current, and high reliability. It comes in a small package suitable for surface mount applications.
Package: The RLZTE-116.8B is available in a SOD-123 package.
Essence: The essence of RLZTE-116.8B lies in its ability to provide stable voltage regulation and protection in various electronic circuits.
Packaging/Quantity: RLZTE-116.8B is typically packaged in reels of 3000 units.
Specifications
- Voltage Rating: 116.8V
- Power Dissipation: 500mW
- Zener Impedance: 40Ω
- Operating Temperature Range: -65°C to +150°C
Detailed Pin Configuration
The RLZTE-116.8B zener diode has two pins, with the cathode connected to the marked side of the package and the anode connected to the other pin.
Functional Features
- Voltage Regulation: RLZTE-116.8B provides a stable voltage output at 116.8V, making it suitable for precision voltage regulation.
- Overvoltage Protection: It acts as a protective device by limiting the voltage across the circuit it is connected to.
Advantages and Disadvantages
Advantages - Precise Voltage Regulation - Small Package Size - Low Leakage Current
Disadvantages - Limited to specific voltage regulation needs - Sensitive to temperature variations
Working Principles
RLZTE-116.8B operates based on the principle of the zener effect, where it maintains a constant voltage drop across its terminals when reverse biased.
Detailed Application Field Plans
RLZTE-116.8B is commonly used in: - Voltage regulators - Power supplies - Overvoltage protection circuits
Detailed and Complete Alternative Models
Some alternative models to RLZTE-116.8B include: - BZX84C116 - MMSZ5245B - PZM116NB
This completes the English editing encyclopedia entry structure for RLZTE-116.8B, covering its product details, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi RLZTE-116.8B dalam penyelesaian teknikal
What is RLZTE-116.8B?
- RLZTE-116.8B is a high-performance industrial adhesive and sealant designed for use in technical solutions requiring strong bonding and sealing properties.
What materials can RLZTE-116.8B bond?
- RLZTE-116.8B can bond a wide range of materials including metals, plastics, ceramics, glass, and composites.
Is RLZTE-116.8B suitable for outdoor applications?
- Yes, RLZTE-116.8B is formulated to withstand outdoor conditions including exposure to UV light, moisture, and temperature variations.
What is the recommended application temperature for RLZTE-116.8B?
- The recommended application temperature for RLZTE-116.8B is between 5°C to 40°C (41°F to 104°F).
Does RLZTE-116.8B require special surface preparation before application?
- It is recommended to clean and dry the surfaces thoroughly before applying RLZTE-116.8B for optimal bonding.
Can RLZTE-116.8B be painted over after application?
- Yes, RLZTE-116.8B can be painted over once it has fully cured.
What is the shelf life of RLZTE-116.8B?
- When stored in its original unopened packaging at temperatures between 5°C to 25°C (41°F to 77°F), RLZTE-116.8B has a shelf life of 12 months.
Is RLZTE-116.8B resistant to chemicals and solvents?
- Yes, RLZTE-116.8B exhibits good resistance to a wide range of chemicals and solvents once fully cured.
Can RLZTE-116.8B be used in structural bonding applications?
- RLZTE-116.8B is suitable for structural bonding applications where a high-strength adhesive is required.
How long does it take for RLZTE-116.8B to cure?
- The curing time for RLZTE-116.8B depends on factors such as temperature and humidity, but generally, it achieves handling strength in approximately 24 hours and full cure in 7 days.