ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MUR130G
Lihat Butiran Helaian data

MUR130G Diode:

Product Overview

The MUR130G diode belongs to the category of ultrafast rectifiers and is commonly used in power supply applications. Its characteristics include high efficiency, low forward voltage drop, and fast switching speed. The diode is typically packaged in a DO-41 package and is available in various quantities per package.

Specifications

  • Forward Voltage Drop: 0.85V
  • Reverse Recovery Time: 35ns
  • Maximum Continuous Forward Current: 1A
  • Peak Reverse Voltage: 300V

Detailed Pin Configuration

The MUR130G diode has a standard DO-41 package with two leads. The anode is connected to the positive terminal, while the cathode is connected to the negative terminal.

Functional Features

The diode exhibits ultrafast recovery times, making it suitable for high-frequency applications. It also has a low reverse recovery current, which minimizes switching losses.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Fast switching speed
  • Low forward voltage drop

Disadvantages

  • Limited maximum continuous forward current
  • Higher cost compared to standard rectifier diodes

Working Principles

The MUR130G diode operates based on the principle of rectification, allowing current to flow in only one direction. Its ultrafast recovery time ensures minimal reverse recovery losses, making it ideal for high-frequency circuits.

Detailed Application Field Plans

The MUR130G diode is commonly used in: - Switching power supplies - Flyback converters - Freewheeling diodes in high-frequency inverters

Detailed and Complete Alternative Models

  • MUR1100E
  • MUR160G
  • MUR460

In conclusion, the MUR130G diode is a high-performance ultrafast rectifier with excellent efficiency and fast switching characteristics. Its application in power supply and high-frequency circuits makes it a valuable component in electronic systems.

[Word count: 248]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MUR130G dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of MUR130G in technical solutions:

  1. What is MUR130G?

    • MUR130G is a fast recovery diode with a voltage rating of 300V and a current rating of 1A.

  2. What are the typical applications of MUR130G?

    • MUR130G is commonly used in power supply circuits, freewheeling diodes, and reverse polarity protection circuits.

  3. What is the maximum forward voltage drop of MUR130G?

    • The maximum forward voltage drop of MUR130G at 1A is typically around 0.95V.

  4. What is the reverse recovery time of MUR130G?

    • The reverse recovery time of MUR130G is typically around 35ns.

  5. Can MUR130G be used in high-frequency applications?

    • Yes, MUR130G is suitable for high-frequency applications due to its fast recovery time.

  6. What is the operating temperature range of MUR130G?

    • The operating temperature range of MUR130G is typically -65°C to 175°C.

  7. Is MUR130G suitable for use in automotive electronics?

    • Yes, MUR130G is often used in automotive electronics for various applications such as voltage clamping and freewheeling diodes.

  8. Does MUR130G require a heatsink for certain applications?

    • For high-current applications or when operating at elevated temperatures, a heatsink may be recommended for MUR130G.

  9. What are the packaging options available for MUR130G?

    • MUR130G is available in various packages including DO-41, SMA, and SMB.

  10. Are there any potential failure modes to consider when using MUR130G?

    • While MUR130G is a reliable diode, it's important to consider potential failure modes such as overvoltage conditions and excessive thermal stress during operation.

I hope these questions and answers provide helpful information about the application of MUR130G in technical solutions! If you have any more specific questions, feel free to ask.