ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MMSZ4688T1
Lihat Butiran Helaian data

MMSZ4688T1: Product Overview and Analysis

Introduction

The MMSZ4688T1 is a zener diode that belongs to the category of semiconductor devices. This component is widely used in electronic circuits for voltage regulation and protection against overvoltage conditions. In this entry, we will provide an overview of the MMSZ4688T1, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device (Zener diode)
  • Use: Voltage regulation and overvoltage protection in electronic circuits
  • Characteristics: Zener voltage, power dissipation, temperature range, and tolerance
  • Package: SOD-123 package type
  • Essence: Zener diode for voltage regulation and protection
  • Packaging/Quantity: Available in reels or tape and reel packaging with varying quantities

Specifications

The MMSZ4688T1 zener diode has the following specifications: - Zener Voltage: 3.3V - Power Dissipation: 500mW - Temperature Range: -65°C to +150°C - Tolerance: ±5%

Detailed Pin Configuration

The MMSZ4688T1 zener diode has a standard SOD-123 package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

The key functional features of the MMSZ4688T1 zener diode include: - Precise voltage regulation at 3.3V - Protection against overvoltage conditions - Low power dissipation - Wide operating temperature range

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Compact SOD-123 package
  • Wide temperature range
  • Suitable for various electronic applications

Disadvantages

  • Limited power dissipation capability
  • Tolerance of ±5% may not be suitable for high-precision applications

Working Principles

The MMSZ4688T1 zener diode operates based on the principle of the Zener effect, which allows it to maintain a constant voltage across its terminals when reverse-biased. When the voltage across the diode reaches its specified zener voltage, it begins to conduct current, effectively regulating the voltage across the circuit.

Detailed Application Field Plans

The MMSZ4688T1 zener diode finds extensive use in the following application fields: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting - Voltage reference circuits

Detailed and Complete Alternative Models

Some alternative models to the MMSZ4688T1 zener diode include: - BZX84C3V3 - 1N4728A - MM3Z3V3 - BZT52C3V3

In conclusion, the MMSZ4688T1 zener diode is a versatile semiconductor device that offers precise voltage regulation and overvoltage protection in electronic circuits. Its compact package and wide operating temperature range make it suitable for various applications in the electronics industry.

Word count: 411

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MMSZ4688T1 dalam penyelesaian teknikal

  1. What is MMSZ4688T1?

    • MMSZ4688T1 is a Zener diode with a voltage regulator function, commonly used in electronic circuits to maintain a stable voltage.

  2. What is the maximum power dissipation of MMSZ4688T1?

    • The maximum power dissipation of MMSZ4688T1 is 500mW.

  3. What is the voltage rating of MMSZ4688T1?

    • MMSZ4688T1 has a voltage rating of 3.3V.

  4. What are the typical applications of MMSZ4688T1?

    • MMSZ4688T1 is commonly used in voltage regulation, overvoltage protection, and signal clamping applications in various electronic devices and circuits.

  5. What is the operating temperature range of MMSZ4688T1?

    • The operating temperature range of MMSZ4688T1 is -65°C to +150°C.

  6. What is the package type of MMSZ4688T1?

    • MMSZ4688T1 comes in a SOD-123 surface mount package.

  7. What is the reverse standoff voltage of MMSZ4688T1?

    • The reverse standoff voltage of MMSZ4688T1 is typically 3.3V.

  8. Can MMSZ4688T1 be used for ESD protection?

    • Yes, MMSZ4688T1 can be used for Electrostatic Discharge (ESD) protection in electronic circuits.

  9. What are the key features of MMSZ4688T1?

    • Some key features of MMSZ4688T1 include low leakage current, high reliability, and fast response time.

  10. Is MMSZ4688T1 RoHS compliant?

    • Yes, MMSZ4688T1 is RoHS compliant, making it suitable for use in environmentally friendly electronic products.