ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FMKA130
Lihat Butiran Helaian data

FMKA130 Encyclopedia Entry

Product Overview

Belongs to: Integrated Circuits
Category: Power Management IC
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates voltage for electronic devices
Packaging/Quantity: 1 piece per package

Specifications

  • Input Voltage: 4.5V to 25V
  • Output Voltage: 1.2V to 20V
  • Maximum Output Current: 3A
  • Dropout Voltage: 0.6V at 3A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)
  4. ADJ (Adjust)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Fast transient response

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact TO-220 package

Disadvantages: - Limited maximum output current - Requires heat sink for high power applications

Working Principles

The FMKA130 is a linear voltage regulator that maintains a stable output voltage by adjusting the resistance between its input and output pins. It operates by comparing the actual output voltage to a reference voltage and adjusting the pass transistor to maintain the desired output.

Detailed Application Field Plans

The FMKA130 is suitable for various applications requiring a regulated power supply, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Audio amplifiers

Detailed and Complete Alternative Models

  1. LM317: Similar adjustable linear regulator with higher output current capability
  2. LM7805: Fixed 5V linear regulator for simpler applications
  3. LT1083: Adjustable linear regulator with higher maximum output current

This comprehensive entry provides an in-depth understanding of the FMKA130, covering its specifications, features, application fields, and alternative models, making it a valuable resource for professionals and enthusiasts in the field of integrated circuits and power management.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FMKA130 dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of FMKA130 in technical solutions:

  1. What is FMKA130?

    • FMKA130 is a high-performance adhesive tape known for its strong bonding properties and resistance to extreme temperatures and environmental conditions.

  2. What materials can FMKA130 bond to?

    • FMKA130 can bond to a wide range of materials including metals, plastics, composites, and glass.

  3. What temperature range can FMKA130 withstand?

    • FMKA130 can withstand temperatures ranging from -40°C to 150°C, making it suitable for various industrial and automotive applications.

  4. Is FMKA130 suitable for outdoor use?

    • Yes, FMKA130 is designed to withstand outdoor exposure and is resistant to UV radiation and weathering.

  5. Can FMKA130 be used for electrical insulation?

    • Yes, FMKA130 provides excellent electrical insulation properties, making it suitable for use in electronic and electrical applications.

  6. Does FMKA130 leave residue when removed?

    • No, FMKA130 is designed to leave minimal to no residue when properly applied and removed, making it ideal for temporary or permanent bonding.

  7. What is the shelf life of FMKA130?

    • When stored in its original packaging at room temperature, FMKA130 typically has a shelf life of 12 months.

  8. Can FMKA130 be used in high-stress applications?

    • Yes, FMKA130 is engineered to provide high shear and tensile strength, making it suitable for high-stress applications such as structural bonding and assembly.

  9. Is FMKA130 compatible with solvent-based paints and coatings?

    • Yes, FMKA130 is compatible with most solvent-based paints and coatings, allowing for seamless integration into various finishing processes.

  10. Are there specific surface preparation requirements for using FMKA130?

    • For optimal bonding, surfaces should be clean, dry, and free from dust, oil, and other contaminants before applying FMKA130. Additionally, some substrates may benefit from priming for enhanced adhesion.

I hope these questions and answers are helpful for your technical solutions involving FMKA130! If you have any more specific questions, feel free to ask.