ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
DM74AS651NT
Lihat Butiran Helaian data

DM74AS651NT

Product Overview

Category

DM74AS651NT belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital systems for various applications such as data transmission, signal processing, and control.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL logic levels
  • Robust design for reliable performance

Package

DM74AS651NT is available in a standard 16-pin dual in-line package (DIP), which facilitates easy integration into circuit boards.

Essence

The essence of DM74AS651NT lies in its ability to efficiently process and transmit digital signals within electronic systems.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of DM74AS651NT chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: AS
  • Number of Pins: 16
  • Input/Output Type: Tri-state
  • Maximum Clock Frequency: 25 MHz
  • Propagation Delay: 10 ns

Detailed Pin Configuration

  1. A0: Input pin for address bit 0
  2. A1: Input pin for address bit 1
  3. A2: Input pin for address bit 2
  4. A3: Input pin for address bit 3
  5. A4: Input pin for address bit 4
  6. A5: Input pin for address bit 5
  7. OE: Output enable pin
  8. GND: Ground reference
  9. Y0: Output pin for data bit 0
  10. Y1: Output pin for data bit 1
  11. Y2: Output pin for data bit 2
  12. Y3: Output pin for data bit 3
  13. Y4: Output pin for data bit 4
  14. Y5: Output pin for data bit 5
  15. VCC: Positive power supply
  16. NC: No connection

Functional Features

  • Tri-state outputs allow multiple devices to share a common bus without interference.
  • Address inputs enable the selection of specific data bits for output.
  • Output enable pin (OE) controls the activation of the outputs.
  • Compatibility with TTL logic levels ensures seamless integration with existing systems.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data processing.
  • Low power consumption contributes to energy efficiency.
  • Wide operating voltage range allows for flexibility in various applications.
  • Robust design ensures reliable performance even in challenging environments.

Disadvantages

  • Limited number of address and data bits may restrict the complexity of certain applications.
  • Propagation delay of 10 ns may introduce timing constraints in high-speed systems.

Working Principles

DM74AS651NT operates based on the principles of digital logic. The address inputs are used to select specific data bits, which are then outputted through the corresponding output pins. The tri-state outputs allow for sharing of the data bus among multiple devices, while the output enable pin controls the activation of the outputs.

Detailed Application Field Plans

DM74AS651NT finds applications in various fields, including: 1. Data communication systems 2. Industrial automation 3. Control systems 4. Signal processing 5. Embedded systems

Detailed and Complete Alternative Models

  1. DM74AS651N: Similar to DM74AS651NT but available in a different package (e.g., SOIC).
  2. DM74LS651: A lower-power version of DM74AS651NT with similar functionality.
  3. DM74HC651: A CMOS version of DM74AS651NT with improved noise immunity.

Note: The above list is not exhaustive, and there may be other alternative models available in the market.

Word count: 536 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi DM74AS651NT dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of DM74AS651NT in technical solutions:

  1. Q: What is DM74AS651NT? A: DM74AS651NT is a specific type of integrated circuit (IC) that functions as a bus transceiver with 3-state outputs.

  2. Q: What is the purpose of DM74AS651NT in technical solutions? A: DM74AS651NT is commonly used to enable bidirectional data transfer between two buses or systems, allowing them to communicate with each other.

  3. Q: What voltage levels does DM74AS651NT support? A: DM74AS651NT supports TTL (Transistor-Transistor Logic) voltage levels, typically operating at 5V.

  4. Q: How many data lines can DM74AS651NT handle? A: DM74AS651NT has 8 data lines, making it suitable for applications requiring parallel data transfer.

  5. Q: Can DM74AS651NT handle high-speed data transfer? A: Yes, DM74AS651NT is designed to operate at high speeds, making it suitable for applications that require fast data transfer rates.

  6. Q: Does DM74AS651NT have any built-in protection features? A: Yes, DM74AS651NT includes built-in diode clamps on all inputs and outputs to protect against electrostatic discharge (ESD).

  7. Q: Can DM74AS651NT be used in both synchronous and asynchronous applications? A: Yes, DM74AS651NT can be used in both synchronous and asynchronous applications, depending on the specific requirements of the system.

  8. Q: What is the maximum current that DM74AS651NT can sink/source? A: DM74AS651NT can typically sink/source up to 24mA of current, making it suitable for driving standard TTL loads.

  9. Q: Can DM74AS651NT be cascaded to handle more data lines? A: Yes, multiple DM74AS651NT ICs can be cascaded together to handle a larger number of data lines if needed.

  10. Q: Are there any specific precautions to consider when using DM74AS651NT? A: It is important to ensure proper power supply decoupling and signal integrity measures when using DM74AS651NT to maintain reliable operation.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of DM74AS651NT.