ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CAT25010HU4I-GT3
Lihat Butiran Helaian data

CAT25010HU4I-GT3

Product Overview

Category

CAT25010HU4I-GT3 belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuits.

Use

This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, automotive systems, consumer electronics, and industrial applications.

Characteristics

  • Non-volatile memory: The CAT25010HU4I-GT3 retains stored data even when power is removed.
  • High endurance: It supports a high number of read/write cycles, ensuring reliable data storage.
  • Low power consumption: The device operates at low power levels, making it suitable for battery-powered applications.
  • Small form factor: The CAT25010HU4I-GT3 comes in a compact package, saving valuable board space.
  • Wide temperature range: It can operate reliably in extreme temperature conditions.

Package

The CAT25010HU4I-GT3 is available in a small 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of CAT25010HU4I-GT3 lies in its ability to provide reliable and non-volatile data storage in a compact and low-power package.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Memory capacity: 1 kilobit (128 bytes)
  • Interface: Serial I2C (Inter-Integrated Circuit)
  • Operating voltage: 1.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Data retention: Up to 200 years
  • Write endurance: 1 million write cycles

Detailed Pin Configuration

The CAT25010HU4I-GT3 has the following pin configuration:

  1. VCC: Power supply voltage
  2. SDA: Serial data input/output
  3. SCL: Serial clock input
  4. WP: Write protect pin (optional)
  5. GND: Ground
  6. NC: No connection
  7. NC: No connection
  8. NC: No connection

Functional Features

  • Byte-level Read/Write: The CAT25010HU4I-GT3 allows individual bytes to be read from or written to the memory.
  • Software Write Protection: The device supports software write protection, preventing accidental modification of stored data.
  • Sequential Read: It enables sequential reading of multiple bytes, reducing access time.
  • Self-timed Programming Cycle: The programming cycle is automatically timed, simplifying the write operation.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • High endurance allows for frequent read/write operations without compromising reliability.
  • Low power consumption extends battery life in portable devices.
  • Compact package saves board space in tight designs.
  • Wide temperature range makes it suitable for various environments.

Disadvantages

  • Limited memory capacity may not be sufficient for certain applications requiring larger storage.
  • Slower write speed compared to some other memory technologies.
  • Vulnerable to electromagnetic interference due to its small form factor.

Working Principles

The CAT25010HU4I-GT3 utilizes EEPROM technology, which stores data by trapping electric charges within a floating gate transistor. When a byte of data needs to be written, an electrical charge is applied to the floating gate, altering its threshold voltage. This change in threshold voltage represents the stored data. During read operations, the threshold voltage is measured to determine the stored value.

Detailed Application Field Plans

The CAT25010HU4I-GT3 finds applications in various fields, including but not limited to: - Microcontrollers: Used for storing configuration data, calibration values, and firmware updates. - Automotive Systems: Provides non-volatile storage for vehicle settings, mileage data, and diagnostic information. - Consumer Electronics: Enables data storage in devices like smartwatches, fitness trackers, and home automation systems. - Industrial Applications: Used for storing sensor calibration data, equipment parameters, and event logging.

Detailed and Complete Alternative Models

Some alternative models to CAT25010HU4I-GT3 include: - AT24C01A: 1 kilobit I2C EEPROM by Atmel - 25AA010A: 1 kilobit SPI (Serial Peripheral Interface) EEPROM by Microchip - M93C46: 1 kilobit Microwire EEPROM by STMicroelectronics

These alternative models offer similar functionality and can be considered as replacements based on specific requirements.

Word count: 550 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CAT25010HU4I-GT3 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of CAT25010HU4I-GT3 in technical solutions:

  1. Q: What is CAT25010HU4I-GT3? A: CAT25010HU4I-GT3 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by ON Semiconductor.

  2. Q: What is the storage capacity of CAT25010HU4I-GT3? A: CAT25010HU4I-GT3 has a storage capacity of 1 kilobit (128 bytes).

  3. Q: What is the operating voltage range for CAT25010HU4I-GT3? A: The operating voltage range for CAT25010HU4I-GT3 is typically between 1.8V and 5.5V.

  4. Q: What is the maximum clock frequency supported by CAT25010HU4I-GT3? A: CAT25010HU4I-GT3 supports a maximum clock frequency of 10 MHz.

  5. Q: Can CAT25010HU4I-GT3 be used for storing program code or configuration data? A: Yes, CAT25010HU4I-GT3 can be used for storing program code, configuration data, or any other type of non-volatile information.

  6. Q: Is CAT25010HU4I-GT3 suitable for automotive applications? A: Yes, CAT25010HU4I-GT3 is designed to meet the requirements of automotive applications and is qualified to the AEC-Q100 standard.

  7. Q: Does CAT25010HU4I-GT3 support write protection? A: Yes, CAT25010HU4I-GT3 supports software write protection, which allows specific memory areas to be write-protected.

  8. Q: What is the endurance rating of CAT25010HU4I-GT3? A: CAT25010HU4I-GT3 has an endurance rating of 1 million write cycles per byte.

  9. Q: Can CAT25010HU4I-GT3 operate in harsh environments? A: Yes, CAT25010HU4I-GT3 is designed to operate in a wide temperature range (-40°C to +125°C) and is suitable for harsh environments.

  10. Q: What interface does CAT25010HU4I-GT3 use for communication? A: CAT25010HU4I-GT3 uses the industry-standard SPI (Serial Peripheral Interface) for communication with the host microcontroller or system.

Please note that these answers are general and may vary depending on the specific application and requirements.