Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CAT1021ZI-25-GT3

CAT1021ZI-25-GT3

Product Overview

Category

The CAT1021ZI-25-GT3 belongs to the category of electronic components, specifically non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in various electronic systems. It provides a reliable and permanent storage solution that retains information even when power is disconnected.

Characteristics

  • Non-volatile: The CAT1021ZI-25-GT3 retains stored data even without power.
  • High capacity: This device offers a large storage capacity, allowing it to store significant amounts of data.
  • Fast access time: The CAT1021ZI-25-GT3 provides quick access to stored information, minimizing delays in data retrieval.
  • Low power consumption: It operates efficiently, consuming minimal power during both read and write operations.

Package

The CAT1021ZI-25-GT3 comes in a compact surface-mount package, making it suitable for integration into various electronic systems.

Essence

The essence of the CAT1021ZI-25-GT3 lies in its ability to provide reliable and non-volatile data storage, ensuring that critical information is preserved even in the absence of power.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of CAT1021ZI-25-GT3 devices. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Operating voltage: 2.7V - 5.5V
  • Memory capacity: 1 kilobit (128 x 8 bits)
  • Data retention: Up to 100 years
  • Write endurance: 1 million write cycles
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The CAT1021ZI-25-GT3 has a total of 8 pins, each serving a specific function:

  1. VCC: Power supply input
  2. GND: Ground connection
  3. SDA: Serial data input/output
  4. SCL: Serial clock input
  5. WP: Write protect input
  6. A0: Address input bit 0
  7. A1: Address input bit 1
  8. NC: No connection

Functional Features

  • Non-volatile storage: The CAT1021ZI-25-GT3 utilizes non-volatile memory technology to store data reliably.
  • Serial interface: It employs a serial interface for easy integration into various electronic systems.
  • Write protection: The device includes a write protect input pin, allowing users to protect stored data from accidental modification.
  • High endurance: With a write endurance of 1 million cycles, the CAT1021ZI-25-GT3 can withstand frequent write operations without compromising its performance.

Advantages and Disadvantages

Advantages

  • Reliable data storage even without power
  • Compact package for easy integration
  • Fast access time for quick data retrieval
  • Low power consumption for efficient operation

Disadvantages

  • Limited storage capacity compared to other memory devices
  • Requires a serial interface for communication

Working Principles

The CAT1021ZI-25-GT3 utilizes a combination of electronic circuits and non-volatile memory cells to store and retrieve data. When data is written to the device, it is stored in the non-volatile memory cells using a series of electrical signals. These signals are then used to retrieve the stored data when requested.

Detailed Application Field Plans

The CAT1021ZI-25-GT3 finds applications in various electronic systems that require reliable and non-volatile data storage. Some potential application fields include:

  1. Embedded systems: The CAT1021ZI-25-GT3 can be used in embedded systems to store critical configuration data or firmware updates.
  2. Industrial automation: It can be employed in industrial automation systems to store calibration data or operational parameters.
  3. Automotive electronics: The CAT1021ZI-25-GT3 can be utilized in automotive electronics for storing vehicle-specific settings or diagnostic information.

Detailed and Complete Alternative Models

  1. CAT1021LI-25-GT3: Similar to the CAT1021ZI-25-GT3, this model offers the same features and specifications but comes in a different package.
  2. CAT1021WI-25-GT3: This alternative model provides the same functionality as the CAT1021ZI-25-GT3 but operates at a wider temperature range.

Please note that the above alternative models are just a few examples, and there may be other similar products available from different manufacturers.

Word count: 590 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CAT1021ZI-25-GT3 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of CAT1021ZI-25-GT3 in technical solutions:

Q1: What is CAT1021ZI-25-GT3? A1: CAT1021ZI-25-GT3 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by ON Semiconductor.

Q2: What is the operating voltage range of CAT1021ZI-25-GT3? A2: The operating voltage range of CAT1021ZI-25-GT3 is typically between 2.7V and 5.5V.

Q3: What is the storage capacity of CAT1021ZI-25-GT3? A3: CAT1021ZI-25-GT3 has a storage capacity of 1 kilobit (128 bytes).

Q4: What is the maximum clock frequency supported by CAT1021ZI-25-GT3? A4: The maximum clock frequency supported by CAT1021ZI-25-GT3 is 400 kHz.

Q5: Can CAT1021ZI-25-GT3 be used for storing user configuration data in embedded systems? A5: Yes, CAT1021ZI-25-GT3 can be used for storing user configuration data in embedded systems due to its non-volatile memory characteristics.

Q6: Is CAT1021ZI-25-GT3 suitable for automotive applications? A6: Yes, CAT1021ZI-25-GT3 is suitable for automotive applications as it meets the necessary industry standards and has a wide operating temperature range.

Q7: Does CAT1021ZI-25-GT3 support write protection? A7: Yes, CAT1021ZI-25-GT3 supports write protection by using the Write Protect (WP) pin.

Q8: Can CAT1021ZI-25-GT3 be used in low-power applications? A8: Yes, CAT1021ZI-25-GT3 is designed for low-power operation and has a standby current of typically 1 µA.

Q9: What is the endurance rating of CAT1021ZI-25-GT3? A9: CAT1021ZI-25-GT3 has an endurance rating of at least 100,000 write cycles.

Q10: Is CAT1021ZI-25-GT3 RoHS compliant? A10: Yes, CAT1021ZI-25-GT3 is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.