ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74VCX16245GX
Lihat Butiran Helaian data

Encyclopedia Entry: 74VCX16245GX

Product Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Buffer/Transceiver
  • Characteristics: High-speed, low-voltage, bidirectional buffer with 16-bit wide input/output bus
  • Package: Surface Mount Technology (SMT)
  • Essence: Efficient signal buffering and voltage level translation
  • Packaging/Quantity: Available in reels or tubes, quantity varies based on manufacturer

Specifications

  • Logic Family: VCX
  • Number of Channels: 16
  • Input Voltage Range: 1.2V to 3.6V
  • Output Voltage Range: 1.2V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: <5 ns
  • Output Drive Strength: ±24 mA
  • Supply Voltage: 1.2V to 3.6V

Detailed Pin Configuration

The 74VCX16245GX IC has a total of 48 pins, divided into two groups of 24 pins each. The pin configuration is as follows:

  • Group A (pins 1-24):

    • Pins 1-8: Data Input/Output (D0-D7)
    • Pins 9-16: Data Input/Output (D8-D15)
    • Pins 17-24: Voltage Supply and Ground (VCC, GND)

  • Group B (pins 25-48):

    • Pins 25-32: Data Input/Output (D0-D7)
    • Pins 33-40: Data Input/Output (D8-D15)
    • Pins 41-48: Voltage Supply and Ground (VCC, GND)

Functional Features

  • Bidirectional data transfer between two buses with different voltage levels
  • High-speed operation for efficient signal buffering
  • Low-voltage compatibility for use in various electronic systems
  • Output drive strength allows for reliable signal transmission over long distances

Advantages and Disadvantages

Advantages: - Efficient voltage level translation between different logic families - High-speed operation enables quick data transfer - Low-voltage compatibility makes it suitable for modern low-power devices - Robust output drive strength ensures reliable signal transmission

Disadvantages: - Limited to 16-bit wide input/output bus - Requires careful consideration of voltage compatibility when interfacing with other ICs

Working Principles

The 74VCX16245GX is designed to buffer and translate signals between two buses operating at different voltage levels. It utilizes a bidirectional architecture, allowing data to flow in both directions. The IC's internal circuitry ensures that the input signals are properly translated to the desired output voltage level, enabling seamless communication between different logic families.

Detailed Application Field Plans

The 74VCX16245GX finds applications in various fields where signal buffering and voltage level translation are required. Some common application areas include:

  1. Microcontrollers: Used to interface microcontrollers operating at different voltage levels.
  2. Communication Systems: Facilitates signal translation between different communication protocols.
  3. Data Acquisition Systems: Enables voltage level compatibility between sensors and data acquisition modules.
  4. Industrial Automation: Used in control systems to interface different components operating at varying voltage levels.
  5. Embedded Systems: Provides voltage level translation between different embedded devices.

Detailed and Complete Alternative Models

  1. SN74LVC245A: Similar functionality with 8-bit wide input/output bus.
  2. MC74VHC245: Compatible with higher supply voltages (up to 5.5V).
  3. 74HCT245: Offers compatibility with TTL logic levels.

(Note: The above list is not exhaustive and there are several other alternative models available in the market.)

Word Count: 386 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74VCX16245GX dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74VCX16245GX in technical solutions:

  1. Q: What is the 74VCX16245GX? A: The 74VCX16245GX is a 16-bit bus transceiver with 3-state outputs, designed for low-voltage applications.

  2. Q: What is the voltage range supported by the 74VCX16245GX? A: The 74VCX16245GX supports a voltage range of 1.65V to 3.6V.

  3. Q: Can the 74VCX16245GX be used for bidirectional data transfer? A: Yes, the 74VCX16245GX can be used for bidirectional data transfer as it has separate input and output ports.

  4. Q: How many channels does the 74VCX16245GX have? A: The 74VCX16245GX has 16 channels, allowing it to handle 16 bits of data simultaneously.

  5. Q: What is the maximum data rate supported by the 74VCX16245GX? A: The 74VCX16245GX supports a maximum data rate of 400Mbps.

  6. Q: Can the 74VCX16245GX be used in mixed-voltage level applications? A: Yes, the 74VCX16245GX is compatible with mixed-voltage level applications as it has built-in voltage translation capabilities.

  7. Q: Does the 74VCX16245GX have any power-saving features? A: Yes, the 74VCX16245GX has a power-down mode that reduces power consumption when not in use.

  8. Q: What is the typical propagation delay of the 74VCX16245GX? A: The typical propagation delay of the 74VCX16245GX is around 2.5ns.

  9. Q: Can the 74VCX16245GX be used in high-speed applications? A: Yes, the 74VCX16245GX is designed for high-speed applications and can handle fast data transfers.

  10. Q: What are some common applications of the 74VCX16245GX? A: The 74VCX16245GX is commonly used in various applications such as data communication systems, networking equipment, and industrial automation where low-voltage and high-speed data transfer is required.

Please note that these answers are general and may vary depending on specific use cases and requirements.