ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74LVTH2245WMX
Lihat Butiran Helaian data

74LVTH2245WMX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter and Bus Transceiver
  • Characteristics: High-speed, low-voltage, and low-power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Bidirectional voltage level translator
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 400 MHz
  • Number of Channels: 8
  • Logic Family: LVTH

Detailed Pin Configuration

The 74LVTH2245WMX has a total of 20 pins, which are arranged as follows:

+-------------------+ OE1 |1 20| VCC A1_1 |2 19| B1_1 A1_2 |3 18| B1_2 A1_3 |4 17| B1_3 A1_4 |5 74LVTH2245WMX 16| B1_4 A1_5 |6 15| B1_5 A1_6 |7 14| B1_6 A1_7 |8 13| B1_7 GND |9 12| B1_8 OE2 |10 11| A1_8 +-------------------+

Functional Features

  • Bidirectional voltage level translation between two different voltage domains
  • Allows interfacing between devices operating at different voltage levels
  • Supports both push-pull and open-drain output configurations
  • Enables bi-directional communication between devices with different logic levels

Advantages and Disadvantages

Advantages: - High-speed operation - Low-voltage operation - Low-power consumption - Bidirectional level shifting capability

Disadvantages: - Limited number of channels (8 in this case) - Requires careful consideration of voltage compatibility between input and output devices

Working Principles

The 74LVTH2245WMX is designed to translate signals between two voltage domains. It utilizes a combination of MOSFETs and CMOS technology to achieve bidirectional level shifting. The direction of translation is controlled by the Output Enable (OE) pins.

When OE1 is low, the A-side inputs are enabled and can be translated to the B-side outputs. Conversely, when OE2 is low, the B-side inputs are enabled and can be translated to the A-side outputs. When either OE pin is high, all outputs are in a high-impedance state.

Detailed Application Field Plans

The 74LVTH2245WMX is commonly used in various applications where voltage level translation is required. Some typical application fields include:

  1. Communication Systems: Facilitating data exchange between devices operating at different voltage levels in communication protocols such as UART, SPI, and I2C.
  2. Embedded Systems: Enabling interfacing between microcontrollers or digital signal processors operating at different voltage levels.
  3. Industrial Automation: Supporting communication between sensors, actuators, and control systems with varying voltage requirements.
  4. Consumer Electronics: Allowing connectivity between devices like smartphones, tablets, and peripherals that operate at different logic levels.

Detailed and Complete Alternative Models

  1. SN74LVCH245APWR - Texas Instruments
  2. NC7WZ245K8X - Fairchild Semiconductor
  3. 74LVC245APW - NXP Semiconductors
  4. MC74VHC245DTR2G - ON Semiconductor
  5. CD74HCT245M96 - Texas Instruments

These alternative models offer similar functionality and can be used as replacements for the 74LVTH2245WMX in various applications.

Word count: 450 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74LVTH2245WMX dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74LVTH2245WMX in technical solutions:

  1. Q: What is the function of the 74LVTH2245WMX? A: The 74LVTH2245WMX is an octal bus transceiver with 3-state outputs, which means it can control the bidirectional flow of data between two buses.

  2. Q: What voltage levels does the 74LVTH2245WMX support? A: The 74LVTH2245WMX supports a wide range of voltage levels, specifically from 1.65V to 5.5V.

  3. Q: How many channels does the 74LVTH2245WMX have? A: The 74LVTH2245WMX has 8 channels, allowing it to handle up to 8 bits of data simultaneously.

  4. Q: Can the 74LVTH2245WMX be used for level shifting? A: Yes, the 74LVTH2245WMX can be used for level shifting as it supports different voltage levels on its input and output sides.

  5. Q: What is the maximum data transfer rate supported by the 74LVTH2245WMX? A: The 74LVTH2245WMX has a maximum data transfer rate of 400Mbps, making it suitable for high-speed applications.

  6. Q: Does the 74LVTH2245WMX have built-in ESD protection? A: Yes, the 74LVTH2245WMX is designed with built-in ESD protection, ensuring robustness against electrostatic discharge.

  7. Q: Can the 74LVTH2245WMX be used in both parallel and serial communication systems? A: Yes, the 74LVTH2245WMX can be used in both parallel and serial communication systems, depending on the application requirements.

  8. Q: What is the power supply voltage range for the 74LVTH2245WMX? A: The 74LVTH2245WMX operates with a power supply voltage range of 2.7V to 3.6V.

  9. Q: Does the 74LVTH2245WMX have any special features for reducing power consumption? A: Yes, the 74LVTH2245WMX incorporates a power-down mode that reduces power consumption when not actively transmitting or receiving data.

  10. Q: Can the 74LVTH2245WMX be used in automotive applications? A: Yes, the 74LVTH2245WMX is suitable for automotive applications as it meets the necessary standards for automotive electronics.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.