ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74F163APC
Lihat Butiran Helaian data

Encyclopedia Entry: 74F163APC

Product Overview

Category

The 74F163APC belongs to the category of integrated circuits (ICs) and specifically falls under the family of digital counters.

Use

This IC is primarily used for counting purposes in various electronic applications. It can be employed in digital systems where precise counting and timing operations are required.

Characteristics

  • The 74F163APC is a synchronous, presettable, 4-bit binary counter.
  • It operates on a supply voltage range of 4.5V to 5.5V.
  • This IC offers high-speed operation with a maximum clock frequency of 100MHz.
  • It features asynchronous parallel load capability, allowing users to preset the initial count value.
  • The 74F163APC has a compact package size, making it suitable for space-constrained designs.

Package and Quantity

The 74F163APC is available in a 16-pin dual in-line package (DIP). Each package contains one IC.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Maximum Clock Frequency: 100MHz
  • Number of Bits: 4
  • Package Type: 16-pin DIP

Pin Configuration

The pin configuration of the 74F163APC is as follows:

+---+--+---+ CLR |1 +--+ 16| Vcc CLK |2 15| Q0 LD |3 14| Q1 D0 |4 13| Q2 D1 |5 74F163APC 12| Q3 D2 |6 11| GND D3 |7 10| PE ENT |8 9| CLK INH +----------+

Functional Features

  • Synchronous Counting: The 74F163APC performs counting operations synchronously with the clock signal.
  • Presettable: It allows users to set an initial count value using the parallel load (LD) input.
  • Asynchronous Clear: The counter can be reset to zero using the clear (CLR) input, regardless of the clock signal.
  • Carry Output: The carry output (Q3) provides a signal when the counter reaches its maximum count value.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient counting in time-critical applications.
  • Compact package size makes it suitable for space-constrained designs.
  • Presettable feature allows flexibility in initializing the counter.
  • Asynchronous clear input provides easy reset functionality.

Disadvantages

  • Limited to 4-bit counting, which may not be sufficient for certain applications requiring larger counters.
  • Requires an external clock signal for proper operation.

Working Principles

The 74F163APC operates based on synchronous counting principles. When the clock signal (CLK) transitions from low to high, the counter increments its count value by one. The parallel load (LD) input allows users to preset the initial count value. The clear (CLR) input resets the counter to zero asynchronously, irrespective of the clock signal. The carry output (Q3) provides a signal when the counter reaches its maximum count value, allowing cascading of multiple counters if required.

Application Field Plans

The 74F163APC finds applications in various digital systems that require precise counting and timing operations. Some potential application fields include: 1. Digital frequency dividers 2. Event counters 3. Timer circuits 4. Industrial automation systems 5. Communication equipment

Alternative Models

There are several alternative models available in the market that offer similar functionality to the 74F163APC. Some notable alternatives include: - 74HC163: A CMOS version of the counter with improved power efficiency. - CD40163: A complementary metal-oxide-semiconductor (CMOS) counter with asynchronous reset capability. - SN74LS163A: A low-power Schottky TTL counter with synchronous parallel load capability.

These alternative models can be considered based on specific design requirements and compatibility with the existing system.

In conclusion, the 74F163APC is a versatile 4-bit binary counter IC used in various digital systems for counting and timing operations. Its high-speed operation, presettable feature, and compact package make it suitable for a wide range of applications.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74F163APC dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74F163APC in technical solutions:

  1. Q: What is the 74F163APC? A: The 74F163APC is a synchronous presettable binary counter with asynchronous reset, commonly used in digital circuits.

  2. Q: What is the maximum clock frequency supported by the 74F163APC? A: The 74F163APC can typically operate at clock frequencies up to 100 MHz.

  3. Q: How many bits does the 74F163APC have? A: The 74F163APC is a 4-bit counter, meaning it can count from 0 to 15 (binary).

  4. Q: Can the 74F163APC be cascaded to create larger counters? A: Yes, multiple 74F163APC chips can be cascaded together to create larger counters with more bits.

  5. Q: What is the purpose of the preset inputs on the 74F163APC? A: The preset inputs allow you to set an initial value for the counter, rather than starting from 0.

  6. Q: How does the asynchronous reset work on the 74F163APC? A: The asynchronous reset input allows you to immediately reset the counter to 0, regardless of the clock signal.

  7. Q: Can the 74F163APC be used as a frequency divider? A: Yes, by connecting the appropriate outputs of the counter to the reset input, you can use it as a frequency divider.

  8. Q: What is the power supply voltage range for the 74F163APC? A: The 74F163APC typically operates with a power supply voltage range of 4.5V to 5.5V.

  9. Q: Does the 74F163APC have any built-in glitch protection? A: Yes, the 74F163APC has built-in glitch protection on the clock input to prevent false counting.

  10. Q: Can the 74F163APC be used in both synchronous and asynchronous modes? A: Yes, the 74F163APC can operate in both synchronous and asynchronous modes, depending on how you connect the inputs.

Please note that these answers are general and may vary based on specific datasheets or manufacturer specifications for the 74F163APC.