The 74ACTQ657SC belongs to the category of integrated circuits (ICs) and specifically falls under the family of digital logic devices.
This IC is commonly used in electronic circuits for data multiplexing and demultiplexing applications. It enables efficient routing of multiple data signals through a single channel.
The 74ACTQ657SC is packaged in a standard SOIC package, which consists of a rectangular plastic body with leads extending from two sides. It is supplied in tape and reel packaging, with a typical quantity of 250 units per reel.
The 74ACTQ657SC has a total of 24 pins, arranged as follows:
+---+--+---+
A0 |1 +--+ 24| VCC
A1 |2 23| B0
A2 |3 22| B1
A3 |4 21| B2
A4 |5 20| B3
A5 |6 19| B4
A6 |7 18| B5
A7 |8 17| B6
GND |9 16| B7
S |10 15| Y0
OE |11 14| Y1
Y7 |12 13| Y2
+----------+
The 74ACTQ657SC is a multiplexer/demultiplexer IC that allows for the selection and routing of data signals. Its key features include:
The 74ACTQ657SC operates based on the principles of digital logic. It utilizes multiplexing and demultiplexing techniques to route data signals through the desired channels. The select input (S) determines the active channel, while the output enable (OE) pin controls the data flow. The IC's internal circuitry ensures efficient signal routing with minimal delay.
The 74ACTQ657SC finds applications in various fields, including:
For users seeking alternative options, the following ICs provide similar functionality:
Sure! Here are 10 common questions and answers related to the application of 74ACTQ657SC:
Question: What is the function of the 74ACTQ657SC?
Answer: The 74ACTQ657SC is a 16-bit transceiver with parity generator/checker that can be used for bidirectional data transfer between two buses.
Question: What is the operating voltage range of the 74ACTQ657SC?
Answer: The 74ACTQ657SC operates within a voltage range of 4.5V to 5.5V.
Question: How many data lines can the 74ACTQ657SC handle?
Answer: The 74ACTQ657SC can handle 16 data lines, as it is a 16-bit transceiver.
Question: Can the 74ACTQ657SC be used in both synchronous and asynchronous applications?
Answer: Yes, the 74ACTQ657SC can be used in both synchronous and asynchronous applications.
Question: Does the 74ACTQ657SC support parity generation and checking?
Answer: Yes, the 74ACTQ657SC has built-in parity generation and checking functionality.
Question: What is the maximum data transfer rate supported by the 74ACTQ657SC?
Answer: The 74ACTQ657SC supports a maximum data transfer rate of 250MHz.
Question: Can the 74ACTQ657SC be cascaded to increase the number of data lines?
Answer: Yes, multiple 74ACTQ657SC devices can be cascaded to increase the number of data lines.
Question: What is the typical propagation delay of the 74ACTQ657SC?
Answer: The typical propagation delay of the 74ACTQ657SC is around 4.5ns.
Question: Does the 74ACTQ657SC have any built-in ESD protection?
Answer: Yes, the 74ACTQ657SC has built-in ESD protection to safeguard against electrostatic discharge.
Question: Can the 74ACTQ657SC be used in high-speed data communication applications?
Answer: Yes, the 74ACTQ657SC is suitable for high-speed data communication applications due to its fast propagation delay and high data transfer rate.
Please note that these answers are general and may vary depending on specific application requirements.