ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74AC08MTC
Lihat Butiran Helaian data

Encyclopedia Entry: 74AC08MTC

Product Overview

Category

The 74AC08MTC belongs to the category of integrated circuits (ICs). Specifically, it falls under the category of quad 2-input AND gates.

Use

The primary use of the 74AC08MTC is to perform logical AND operations on two input signals. It is commonly employed in digital electronic systems for various applications that require logical operations.

Characteristics

  • Quad 2-input AND gates: The 74AC08MTC contains four independent 2-input AND gates within a single package.
  • High-speed operation: This IC is designed to operate at high speeds, making it suitable for time-critical applications.
  • Low power consumption: The 74AC08MTC is optimized for low power consumption, ensuring efficient energy usage.
  • Wide operating voltage range: It can operate within a wide voltage range, typically between 2V and 6V.
  • Compatibility: The IC is compatible with both TTL and CMOS logic levels.

Package and Quantity

The 74AC08MTC is available in a small outline integrated circuit (SOIC) package. It is supplied in tape and reel packaging, with a quantity of 250 units per reel.

Specifications

  • Supply Voltage Range: 2V to 6V
  • Input Voltage Range: 0V to Vcc
  • Output Voltage Range: 0V to Vcc
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 5 ns (typical)
  • Maximum Quiescent Current: 4 µA

Detailed Pin Configuration

The 74AC08MTC has a total of 14 pins, each serving a specific function:

  1. Pin 1: Input A1
  2. Pin 2: Input B1
  3. Pin 3: Output Y1
  4. Pin 4: Ground (GND)
  5. Pin 5: Input A2
  6. Pin 6: Input B2
  7. Pin 7: Output Y2
  8. Pin 8: Vcc (Positive Power Supply)
  9. Pin 9: Output Y3
  10. Pin 10: Input B3
  11. Pin 11: Input A3
  12. Pin 12: Output Y4
  13. Pin 13: Input B4
  14. Pin 14: Input A4

Functional Features

The 74AC08MTC offers the following functional features:

  • Logical AND operation: It performs a logical AND operation on two input signals, producing an output signal based on their logical states.
  • Independent gates: The IC contains four independent 2-input AND gates, allowing simultaneous processing of multiple input combinations.
  • High-speed operation: With a propagation delay of only 5 ns, it enables rapid execution of logical operations.
  • Low power consumption: The IC is designed to minimize power consumption, making it suitable for battery-powered devices.
  • Wide voltage compatibility: It can operate within a wide voltage range, ensuring compatibility with various digital systems.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient processing of logical operations.
  • Low power consumption ensures energy efficiency.
  • Wide operating voltage range enhances compatibility with different systems.
  • Compact package size saves board space in electronic designs.

Disadvantages

  • Limited to performing logical AND operations only.
  • May not be suitable for applications requiring more complex logical functions.

Working Principles

The 74AC08MTC operates based on the principles of Boolean logic. Each 2-input AND gate within the IC compares the logical states of its two input signals and produces an output signal based on the AND operation. The output signal is high (logic 1) only when both input signals are high; otherwise, it remains low (logic 0).

Detailed Application Field Plans

The 74AC08MTC finds applications in various digital electronic systems, including but not limited to:

  1. Microprocessor-based systems: It can be used for address decoding and data manipulation.
  2. Communication systems: The IC can perform logical operations in signal processing circuits.
  3. Industrial control systems: It aids in controlling and monitoring devices based on logical conditions.
  4. Automotive electronics: It can be utilized in vehicle control units for logical decision-making.

Alternative Models

For similar functionality, the following alternative models can be considered:

  1. 74HC08: This model offers similar characteristics but operates at a higher voltage range (2V to 6V).
  2. SN74LS08: It provides comparable functionality with different package options.
  3. CD4081: This model is an alternative CMOS version of the 74AC08MTC.

These alternative models can be chosen based on specific project requirements and availability.

In conclusion, the 74AC08MTC is a quad

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74AC08MTC dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74AC08MTC in technical solutions:

  1. Q: What is the 74AC08MTC? A: The 74AC08MTC is a quad 2-input AND gate integrated circuit (IC) that can be used in various digital logic applications.

  2. Q: What is the operating voltage range for the 74AC08MTC? A: The 74AC08MTC operates within a voltage range of 2V to 6V.

  3. Q: What is the maximum output current of the 74AC08MTC? A: The maximum output current of the 74AC08MTC is typically around 24mA.

  4. Q: Can the 74AC08MTC be used as a level shifter? A: Yes, the 74AC08MTC can be used as a level shifter to convert signals between different voltage levels.

  5. Q: How many inputs does the 74AC08MTC have? A: The 74AC08MTC has four inputs, allowing you to connect multiple signals to it.

  6. Q: What is the propagation delay of the 74AC08MTC? A: The propagation delay of the 74AC08MTC is typically around 4.5ns.

  7. Q: Can the 74AC08MTC be used in high-speed applications? A: Yes, the 74AC08MTC is designed for high-speed operation and can be used in applications that require fast switching times.

  8. Q: Is the 74AC08MTC compatible with other logic families? A: Yes, the 74AC08MTC is compatible with other logic families, such as TTL and CMOS.

  9. Q: Can the 74AC08MTC be used in both digital and analog circuits? A: No, the 74AC08MTC is specifically designed for digital logic applications and may not be suitable for analog circuits.

  10. Q: What is the package type of the 74AC08MTC? A: The 74AC08MTC is available in a small outline integrated circuit (SOIC) package, which is commonly used in electronic systems.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.