ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74ABT543CSC
Lihat Butiran Helaian data

Encyclopedia Entry: 74ABT543CSC

Product Overview

Category

The 74ABT543CSC belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronics for signal transmission and control purposes.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) logic levels

Package

The 74ABT543CSC is available in a small outline package (SOIC) format.

Essence

The essence of this product lies in its ability to facilitate efficient and reliable data transfer between different components of a digital system.

Packaging/Quantity

The 74ABT543CSC is typically packaged in reels or tubes, containing a specific quantity of ICs per package.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 20
  • Logic Family: ABT

Detailed Pin Configuration

  1. OE (Output Enable)
  2. A1 (Data Input A1)
  3. B1 (Data Input B1)
  4. GND (Ground)
  5. B2 (Data Input B2)
  6. A2 (Data Input A2)
  7. B3 (Data Input B3)
  8. A3 (Data Input A3)
  9. B4 (Data Input B4)
  10. A4 (Data Input A4)
  11. B5 (Data Input B5)
  12. A5 (Data Input A5)
  13. B6 (Data Input B6)
  14. A6 (Data Input A6)
  15. B7 (Data Input B7)
  16. A7 (Data Input A7)
  17. VCC (Supply Voltage)
  18. GND (Ground)
  19. Q (Data Output)
  20. Q̅ (Inverted Data Output)

Functional Features

  • Bidirectional data flow
  • Non-inverting outputs
  • Output enable control for tri-state operation
  • High-speed operation with minimal propagation delay
  • Noise immunity and latch-up protection

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data transfer.
  • Wide operating voltage range provides flexibility in various applications.
  • Compatibility with TTL and CMOS logic levels enables seamless integration into existing systems.
  • Tri-state output capability facilitates bus sharing and reduces conflicts.

Disadvantages

  • Limited number of input/output pins may restrict the complexity of certain designs.
  • Sensitivity to electrostatic discharge (ESD) requires proper handling during assembly and usage.

Working Principles

The 74ABT543CSC is a transparent latch with eight data inputs (A1-A7, B1-B7) and corresponding outputs (Q, Q̅). The latch operates based on the state of the output enable (OE) pin. When OE is low, the latch is enabled, allowing data to pass from the inputs to the outputs. Conversely, when OE is high, the latch is disabled, isolating the inputs from the outputs.

Detailed Application Field Plans

The 74ABT543CSC finds application in various digital systems, including but not limited to: - Data communication networks - Microprocessor-based systems - Memory modules - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

  • 74ACT543: Similar functionality with different logic family (ACT)
  • 74HC543: Similar functionality with different logic family (HC)
  • 74LS543: Similar functionality with different logic family (LS)
  • 74F543: Similar functionality with different logic family (F)

These alternative models offer similar features and can be used as substitutes for the 74ABT543CSC in different applications.

Word count: 530 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74ABT543CSC dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74ABT543CSC in technical solutions:

  1. Q: What is the purpose of the 74ABT543CSC? A: The 74ABT543CSC is an octal registered transceiver with 3-state outputs, commonly used for data transfer between different parts of a digital system.

  2. Q: What voltage levels does the 74ABT543CSC support? A: The 74ABT543CSC supports both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) voltage levels.

  3. Q: How many bits can the 74ABT543CSC handle? A: The 74ABT543CSC is an octal transceiver, meaning it can handle 8 bits of data.

  4. Q: Can the 74ABT543CSC be used for bidirectional data transfer? A: Yes, the 74ABT543CSC supports bidirectional data transfer, allowing data to flow in both directions.

  5. Q: What is the maximum operating frequency of the 74ABT543CSC? A: The maximum operating frequency of the 74ABT543CSC is typically around 200 MHz.

  6. Q: Does the 74ABT543CSC have built-in protection against bus contention? A: Yes, the 74ABT543CSC has built-in bus-hold circuitry that prevents bus contention when multiple devices try to drive the same bus simultaneously.

  7. Q: Can the 74ABT543CSC operate with a wide range of power supply voltages? A: Yes, the 74ABT543CSC can operate with a power supply voltage range of 4.5V to 5.5V.

  8. Q: Does the 74ABT543CSC have internal pull-up or pull-down resistors? A: No, the 74ABT543CSC does not have internal pull-up or pull-down resistors. External resistors may be required for proper operation.

  9. Q: Can the 74ABT543CSC drive capacitive loads directly? A: Yes, the 74ABT543CSC has strong output drivers that can drive capacitive loads directly without the need for additional buffering.

  10. Q: Are there any specific precautions to consider when using the 74ABT543CSC? A: It is important to ensure proper decoupling and bypassing of power supply pins, avoid exceeding the maximum ratings, and follow recommended PCB layout guidelines provided in the datasheet to minimize noise and signal integrity issues.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the datasheet and consult with technical experts for accurate information.