ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74ABT241CSJ
Lihat Butiran Helaian data

Encyclopedia Entry: 74ABT241CSJ

Product Overview

Category

The 74ABT241CSJ belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for signal amplification, buffering, and switching purposes.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt trigger inputs for noise immunity
  • Output drive capability: ±24 mA at 5V
  • Balanced propagation delays
  • ESD protection: HBM JESD22-A114E exceeds 2000V; MM JESD22-A115-A exceeds 200V

Package

The 74ABT241CSJ is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of this IC lies in its ability to provide reliable and efficient signal amplification and buffering in digital electronic systems.

Packaging/Quantity

The 74ABT241CSJ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Input Capacitance: 3 pF
  • Output Capacitance: 6 pF
  • Propagation Delay: 3.8 ns (max)
  • Output Current: ±24 mA

Detailed Pin Configuration

The 74ABT241CSJ has a total of 20 pins, which are assigned specific functions as follows:

  1. OE (Output Enable) - Output Enable Control
  2. A1 - Input A1
  3. B1 - Input B1
  4. GND - Ground
  5. A2 - Input A2
  6. B2 - Input B2
  7. Y1 - Output Y1
  8. Y2 - Output Y2
  9. VCC - Positive Power Supply
  10. GND - Ground
  11. B3 - Input B3
  12. A3 - Input A3
  13. Y3 - Output Y3
  14. Y4 - Output Y4
  15. GND - Ground
  16. A4 - Input A4
  17. B4 - Input B4
  18. OE (Output Enable) - Output Enable Control
  19. GND - Ground
  20. VCC - Positive Power Supply

Functional Features

  • The 74ABT241CSJ is a quad buffer/line driver with 3-state outputs.
  • It features non-inverting outputs and Schmitt trigger inputs for improved noise immunity.
  • The output enable control allows the user to disable the outputs when not needed, reducing power consumption.
  • This IC provides high-speed operation and balanced propagation delays, making it suitable for time-critical applications.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient signal processing in digital systems.
  • Low power consumption helps conserve energy.
  • Wide operating voltage range allows compatibility with various power supply levels.
  • Schmitt trigger inputs provide noise immunity, ensuring reliable signal transmission.
  • Balanced propagation delays ensure accurate timing in critical applications.

Disadvantages

  • Limited output drive capability may restrict its use in certain high-current applications.
  • The small outline integrated circuit (SOIC) package may require specialized equipment for soldering and handling.

Working Principles

The 74ABT241CSJ operates based on the principles of digital logic. It receives input signals through its A1-A4 and B1-B4 pins, which are then amplified and buffered. The output signals are available at the Y1-Y4 pins. The output enable (OE) control pin allows the user to enable or disable the outputs as needed. When the OE pin is high, the outputs are enabled, and when it is low, the outputs are disabled.

Detailed Application Field Plans

The 74ABT241CSJ finds applications in various digital electronic systems, including but not limited to: - Microcontrollers - Data communication systems - Memory modules - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74ABT241CSJ include: - SN74ABT241D - Texas Instruments - MC74ABT241DW - ON Semiconductor - CD74ABT241E - Texas Instruments - 74ABT241CSCX - Fairchild Semiconductor

These alternative models can be considered based on specific requirements and availability.

In conclusion, the 74ABT241CSJ is a versatile integrated circuit used for signal amplification and buffering in digital electronic systems. Its high-speed operation, low power consumption, and noise immunity make it suitable for

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74ABT241CSJ dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74ABT241CSJ in technical solutions:

  1. Q: What is the 74ABT241CSJ? A: The 74ABT241CSJ is a 8-bit buffer/line driver with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the maximum operating voltage for the 74ABT241CSJ? A: The maximum operating voltage for the 74ABT241CSJ is typically 5.5V.

  3. Q: How many inputs does the 74ABT241CSJ have? A: The 74ABT241CSJ has 8 inputs.

  4. Q: Can the 74ABT241CSJ be used as a level shifter? A: Yes, the 74ABT241CSJ can be used as a level shifter to convert signals between different voltage levels.

  5. Q: What is the output current capability of the 74ABT241CSJ? A: The 74ABT241CSJ has a typical output current capability of 24mA.

  6. Q: Is the 74ABT241CSJ compatible with TTL logic levels? A: Yes, the 74ABT241CSJ is compatible with both TTL and CMOS logic levels.

  7. Q: Can the 74ABT241CSJ be used in bidirectional data transfer applications? A: No, the 74ABT241CSJ is a unidirectional buffer and cannot be used for bidirectional data transfer.

  8. Q: What is the propagation delay of the 74ABT241CSJ? A: The propagation delay of the 74ABT241CSJ is typically around 3.5ns.

  9. Q: Can the 74ABT241CSJ be used in high-speed applications? A: Yes, the 74ABT241CSJ is designed for high-speed operation and can be used in applications with fast switching requirements.

  10. Q: What is the power supply voltage range for the 74ABT241CSJ? A: The power supply voltage range for the 74ABT241CSJ is typically between 4.5V and 5.5V.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications of the 74ABT241CSJ.