BZX79-C62,143

Product Overview

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

Zener voltage: 62V
Power dissipation: 500mW
Package type: DO-35
Operating temperature range: -65°C to +200°C
Storage temperature range: -65°C to +200°C

Package

The BZX79-C62,143 is typically available in bulk or tape and reel packaging.

Essence

This Zener diode is essential for maintaining a constant voltage across a load in various electronic applications.

Packaging/Quantity

It is usually packaged in quantities of 100 or 1000 units per reel or bulk pack.

Specifications

Zener voltage: 62V
Power dissipation: 500mW
Forward voltage: 1.2V
Reverse current: 5μA
Maximum temperature coefficient: 0.07%/°C

Detailed Pin Configuration

The BZX79-C62,143 Zener diode has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

Precise voltage regulation
Overvoltage protection
Stable operation over a wide temperature range

Advantages

High reliability
Small form factor
Low cost

Disadvantages

Limited power dissipation capability
Sensitivity to temperature variations

Working Principles

The BZX79-C62,143 operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased.

Detailed Application Field Plans

This Zener diode is widely used in: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits - Voltage reference circuits

Detailed and Complete Alternative Models

Some alternative models to the BZX79-C62,143 include: - BZX79-C56,143 (Zener voltage: 56V) - BZX79-C68,143 (Zener voltage: 68V) - BZX79-C75,143 (Zener voltage: 75V)

In conclusion, the BZX79-C62,143 Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its small form factor and reliability make it suitable for a wide range of applications, despite its limitations in power dissipation and sensitivity to temperature changes.

[Word count: 344]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi BZX79-C62,143 dalam penyelesaian teknikal

What is the BZX79-C62,143 diode used for?
- The BZX79-C62,143 diode is commonly used for voltage regulation and transient voltage suppression in various technical solutions.
What is the maximum forward voltage of the BZX79-C62,143 diode?
- The maximum forward voltage of the BZX79-C62,143 diode is typically around 1.5V at a forward current of 5mA.
What is the breakdown voltage of the BZX79-C62,143 diode?
- The breakdown voltage of the BZX79-C62,143 diode is approximately 62V.
Can the BZX79-C62,143 diode be used for overvoltage protection?
- Yes, the BZX79-C62,143 diode can be used for overvoltage protection due to its ability to clamp excessive voltages.
What are the typical applications of the BZX79-C62,143 diode in technical solutions?
- The BZX79-C62,143 diode is commonly used in power supplies, voltage regulators, and signal conditioning circuits.
Is the BZX79-C62,143 diode suitable for low-power applications?
- Yes, the BZX79-C62,143 diode is suitable for low-power applications due to its low leakage current and low forward voltage.
What is the temperature range for the BZX79-C62,143 diode?
- The BZX79-C62,143 diode typically operates within a temperature range of -65°C to +175°C.
Does the BZX79-C62,143 diode require a heatsink for certain applications?
- Depending on the specific application and power dissipation, a heatsink may be required for the BZX79-C62,143 diode to ensure proper thermal management.
Can the BZX79-C62,143 diode handle transient voltage spikes?
- Yes, the BZX79-C62,143 diode is designed to handle transient voltage spikes and protect sensitive components in a circuit.
Are there any alternative diodes that can be used in place of the BZX79-C62,143 for similar applications?
- Yes, other diodes with comparable specifications, such as the BZX79-C56,143 or BZX79-C68,143, can be used as alternatives for similar applications.