BZV55-C9V1,115 Encyclopedia Entry
Product Overview
Category
The BZV55-C9V1,115 belongs to the category of Zener diodes.
Use
It is commonly used for voltage regulation and protection in electronic circuits.
Characteristics
- Zener voltage: 9.1V
- Power dissipation: 500mW
- Package type: SOD80C
- Operating temperature range: -65°C to +150°C
- Tolerance: ±5%
Package
The BZV55-C9V1,115 is typically available in reels or tape and reel packaging.
Essence
This Zener diode is essential for maintaining a constant voltage across a load in various electronic applications.
Packaging/Quantity
It is usually packaged in quantities of 3000 units per reel.
Specifications
- Zener voltage: 9.1V
- Power dissipation: 500mW
- Maximum forward voltage: 1.2V
- Reverse current: 5μA
- Temperature coefficient: 5mV/°C
Detailed Pin Configuration
The BZV55-C9V1,115 has two pins, with the cathode connected to the marked side of the diode.
Functional Features
- Precise voltage regulation
- Overvoltage protection
- Low reverse leakage current
Advantages
- Small form factor
- Wide operating temperature range
- High reliability
Disadvantages
- Limited power dissipation capability
- Sensitivity to temperature variations
Working Principles
The BZV55-C9V1,115 operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased.
Detailed Application Field Plans
This Zener diode is widely used in: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits - Voltage reference circuits
Detailed and Complete Alternative Models
Some alternative models to the BZV55-C9V1,115 include: - BZX84C9V1 - 1N4739A - MMBZ5221B
In conclusion, the BZV55-C9V1,115 Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its small form factor and wide operating temperature range make it suitable for various applications, although its limited power dissipation capability and sensitivity to temperature variations should be considered when designing circuits.
[Word count: 320]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi BZV55-C9V1,115 dalam penyelesaian teknikal
What is the maximum continuous forward current of BZV55-C9V1,115?
- The maximum continuous forward current of BZV55-C9V1,115 is 200 mA.
What is the reverse voltage of BZV55-C9V1,115?
- The reverse voltage of BZV55-C9V1,115 is 9.1 V.
What is the power dissipation of BZV55-C9V1,115?
- The power dissipation of BZV55-C9V1,115 is 500 mW.
What is the operating temperature range of BZV55-C9V1,115?
- The operating temperature range of BZV55-C9V1,115 is -65°C to +150°C.
Can BZV55-C9V1,115 be used for voltage regulation in low-power applications?
- Yes, BZV55-C9V1,115 can be used for voltage regulation in low-power applications due to its low forward voltage drop.
Is BZV55-C9V1,115 suitable for overvoltage protection in electronic circuits?
- Yes, BZV55-C9V1,115 is suitable for overvoltage protection in electronic circuits due to its fast response time and high surge capability.
What are the typical applications of BZV55-C9V1,115 in technical solutions?
- BZV55-C9V1,115 is commonly used in voltage clamping, overvoltage protection, and voltage regulation in various electronic circuits.
Does BZV55-C9V1,115 require a heatsink for normal operation?
- No, BZV55-C9V1,115 typically does not require a heatsink for normal operation in low-power applications.
What are the key electrical characteristics of BZV55-C9V1,115 that make it suitable for technical solutions?
- The low forward voltage drop, high surge capability, and fast response time make BZV55-C9V1,115 suitable for various technical solutions.
Are there any specific layout considerations when using BZV55-C9V1,115 in a circuit?
- It is recommended to minimize lead lengths and keep the device close to the protected circuit to reduce parasitic inductance and ensure optimal performance.