Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MP5KE40A
Lihat Butiran Helaian data

MP5KE40A

Product Overview

Category

The MP5KE40A belongs to the category of electronic components, specifically a voltage regulator.

Use

It is used to regulate and stabilize the output voltage in various electronic circuits and devices.

Characteristics

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 20V
  • High Efficiency
  • Low Dropout Voltage
  • Overcurrent Protection
  • Thermal Shutdown Protection

Package

The MP5KE40A comes in a small outline package (SOP) with 8 pins.

Essence

The essence of the MP5KE40A lies in its ability to provide stable and regulated voltage output for electronic applications.

Packaging/Quantity

The MP5KE40A is typically packaged in reels containing 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 20V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. NC (No Connection)
  6. NC (No Connection)
  7. EN (Enable)
  8. NC (No Connection)

Functional Features

  • Regulates and stabilizes output voltage
  • Protects against overcurrent
  • Provides thermal shutdown protection
  • Enables and disables output through the EN pin

Advantages

  • Wide input voltage range
  • High efficiency
  • Compact package size
  • Overcurrent and thermal protection features

Disadvantages

  • Limited maximum output current
  • Dropout voltage may not be suitable for all applications

Working Principles

The MP5KE40A operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage despite changes in input voltage or load conditions.

Detailed Application Field Plans

The MP5KE40A is commonly used in battery-powered devices, portable electronics, and low-power microcontroller-based systems where a stable and efficient voltage supply is essential.

Detailed and Complete Alternative Models

  • MP5KE30A: Similar specifications with a lower dropout voltage
  • MP5KE50A: Higher maximum output current and wider input voltage range

In conclusion, the MP5KE40A is a versatile voltage regulator with a wide input voltage range, high efficiency, and essential protection features, making it suitable for various electronic applications.

Word Count: 398

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MP5KE40A dalam penyelesaian teknikal

  1. What is the MP5KE40A?

    • The MP5KE40A is a high-performance, low-power 32-bit microcontroller based on ARM Cortex-M4 core, designed for a wide range of technical solutions.

  2. What are the key features of the MP5KE40A?

    • The key features include a high-speed 72 MHz CPU, integrated peripherals such as ADC, DAC, timers, and communication interfaces like UART, SPI, and I2C.

  3. How can the MP5KE40A be used in motor control applications?

    • The MP5KE40A can be used to implement advanced motor control algorithms for applications such as electric vehicles, industrial automation, and robotics.

  4. Is the MP5KE40A suitable for battery-powered devices?

    • Yes, the MP5KE40A's low-power capabilities make it well-suited for battery-powered devices, extending the battery life of portable and IoT applications.

  5. Can the MP5KE40A be used for real-time operating systems (RTOS)?

    • Yes, the MP5KE40A supports RTOS and can efficiently handle real-time tasks with its high-performance Cortex-M4 core and integrated peripherals.

  6. What development tools are available for programming the MP5KE40A?

    • Development tools such as IDEs, compilers, debuggers, and evaluation boards are available to program and debug the MP5KE40A, making it easier to develop technical solutions.

  7. Does the MP5KE40A support communication protocols like CAN and Ethernet?

    • Yes, the MP5KE40A supports various communication protocols including CAN, Ethernet, and USB, enabling connectivity in industrial and automotive applications.

  8. What are the security features of the MP5KE40A?

    • The MP5KE40A includes hardware-based security features such as cryptographic accelerators, secure boot, and tamper detection, ensuring data integrity and system security.

  9. Can the MP5KE40A be used in temperature-sensitive environments?

    • Yes, the MP5KE40A has a wide operating temperature range and can be used in temperature-sensitive environments such as automotive and industrial applications.

  10. Are there any application notes or reference designs available for the MP5KE40A?

    • Yes, application notes, reference designs, and technical documentation are available to assist in the implementation of the MP5KE40A in various technical solutions.