Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MA5KP7.0AE3
Lihat Butiran Helaian data

MA5KP7.0AE3

Introduction

The MA5KP7.0AE3 belongs to the category of transient voltage suppressor diodes (TVS diodes). These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and transients. The MA5KP7.0AE3 is specifically designed to provide protection against overvoltage events, making it an essential component in various electronic systems.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage spikes and transients
  • Characteristics: Fast response time, high surge capability, low clamping voltage
  • Package: Axial leaded, DO-201AD
  • Essence: Safeguarding sensitive electronic components
  • Packaging/Quantity: Available in reels or bulk packaging, quantity varies by manufacturer

Specifications

  • Voltage - Reverse Standoff (Typ): 6.4V
  • Voltage - Breakdown (Min): 7.13V
  • Voltage - Clamping (Max) @ Ipp: 10.3V
  • Current - Peak Pulse (10/1000µs): 167A
  • Power - Peak Pulse: 5000W
  • Operating Temperature: -55°C to 175°C
  • Mounting Type: Through Hole
  • Package / Case: DO-201AD, Axial

Detailed Pin Configuration

The MA5KP7.0AE3 typically has two leads, with the cathode being shorter than the anode. The pin configuration is as follows: - Anode (A) - Cathode (K)

Functional Features

  • Fast response time to clamp transient voltages
  • High surge capability to withstand large transient currents
  • Low clamping voltage to limit the voltage across protected components

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes and transients
  • Fast response time ensures minimal impact on the protected circuit
  • High surge capability for robust transient suppression

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection
  • Clamping voltage may still allow some voltage transients to pass through

Working Principles

The MA5KP7.0AE3 operates based on the principle of avalanche breakdown. When a voltage spike occurs, the diode rapidly conducts, diverting the excess current away from the sensitive components. This action effectively limits the voltage across the protected circuit, preventing damage due to overvoltage events.

Detailed Application Field Plans

The MA5KP7.0AE3 finds extensive application in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MA5KP7.0AE3 include: - P6KE6.8A - 1.5KE6.8A - SMBJ6.8A - SMCJ6.8A - SA5.0CA

In summary, the MA5KP7.0AE3 transient voltage suppressor diode is a crucial component in protecting electronic circuits from voltage spikes and transients. Its fast response time, high surge capability, and low clamping voltage make it an effective solution for safeguarding sensitive components in a wide range of applications.

Word Count: 462

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MA5KP7.0AE3 dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of MA5KP7.0AE3 in technical solutions:

  1. What is the maximum voltage rating of MA5KP7.0AE3?

    • The maximum voltage rating of MA5KP7.0AE3 is 7.0V.

  2. What is the peak pulse power of MA5KP7.0AE3?

    • The peak pulse power of MA5KP7.0AE3 is 5000W.

  3. What type of diode is MA5KP7.0AE3?

    • MA5KP7.0AE3 is a transient voltage suppressor (TVS) diode.

  4. What are the typical applications of MA5KP7.0AE3?

    • MA5KP7.0AE3 is commonly used for overvoltage protection in various electronic circuits, such as power supplies, communication equipment, and automotive electronics.

  5. What is the breakdown voltage of MA5KP7.0AE3?

    • The breakdown voltage of MA5KP7.0AE3 is typically 7.78V.

  6. Is MA5KP7.0AE3 suitable for high-speed data lines protection?

    • Yes, MA5KP7.0AE3 is suitable for protecting high-speed data lines from voltage transients.

  7. What is the response time of MA5KP7.0AE3?

    • The response time of MA5KP7.0AE3 is very fast, typically in the nanosecond range.

  8. Can MA5KP7.0AE3 be used in harsh environmental conditions?

    • Yes, MA5KP7.0AE3 is designed to withstand harsh environmental conditions and is suitable for use in industrial and automotive applications.

  9. Does MA5KP7.0AE3 meet any specific industry standards?

    • MA5KP7.0AE3 complies with industry standards such as AEC-Q101 for automotive applications and is also RoHS compliant.

  10. What is the operating temperature range of MA5KP7.0AE3?

    • The operating temperature range of MA5KP7.0AE3 is typically -55°C to 175°C, making it suitable for a wide range of operating environments.