Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
M1.5KE160CAE3
Lihat Butiran Helaian data

M1.5KE160CAE3 - Product Overview and Analysis

Introduction

The M1.5KE160CAE3 belongs to the category of transient voltage suppressor diodes (TVS diodes). These diodes are used to protect sensitive electronic components from voltage spikes and transients. The M1.5KE160CAE3 is designed to provide robust protection for electronic circuits in various applications.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage spikes and transients
  • Characteristics: High surge capability, fast response time, low clamping voltage
  • Package: DO-201AD
  • Essence: Provides overvoltage protection for sensitive electronic components
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Voltage - Reverse Standoff (Typ): 144V
  • Voltage - Breakdown: 160V
  • Clamping Voltage: 231V
  • Peak Pulse Current: 38.6A
  • Capacitance: 170pF
  • Operating Temperature: -55°C to 175°C
  • Mounting Type: Through Hole
  • Package / Case: DO-201AD

Detailed Pin Configuration

The M1.5KE160CAE3 TVS diode typically has two pins, anode, and cathode. The pin configuration is as follows: - Anode (A) - Cathode (K)

Functional Features

  • Fast response time to transient events
  • Low clamping voltage to minimize stress on protected circuits
  • High surge capability for reliable overvoltage protection

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • Robust construction for reliability

Disadvantages

  • Can introduce some capacitance into the protected circuit
  • May require careful consideration of layout and placement for optimal performance

Working Principles

The M1.5KE160CAE3 operates by diverting excess transient current away from sensitive components when a voltage spike occurs. It achieves this by rapidly switching into a low impedance state, effectively shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The M1.5KE160CAE3 is commonly used in various applications including: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the M1.5KE160CAE3 include: - P6KE160CA - 1.5KE160A - SA15CA

In conclusion, the M1.5KE160CAE3 transient voltage suppressor diode offers effective protection against voltage spikes and transients in a wide range of applications. Its robust design, fast response time, and high surge capability make it a valuable component in safeguarding sensitive electronic circuits.

[Word count: 411]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi M1.5KE160CAE3 dalam penyelesaian teknikal

  1. What is the M1.5KE160CAE3?

    • The M1.5KE160CAE3 is a 1500W TVS (transient voltage suppressor) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What is the breakdown voltage of M1.5KE160CAE3?

    • The breakdown voltage of M1.5KE160CAE3 is 144V, making it suitable for applications where protection against voltage surges up to this level is required.

  3. What are the typical applications of M1.5KE160CAE3?

    • Typical applications include surge protection in telecommunications equipment, industrial control systems, power supplies, and automotive electronics.

  4. What is the maximum clamping voltage of M1.5KE160CAE3?

    • The maximum clamping voltage of M1.5KE160CAE3 is 231V at 19.9A, indicating its ability to limit the peak voltage during a transient event.

  5. What is the peak pulse current rating of M1.5KE160CAE3?

    • The peak pulse current rating is 19.9A, allowing the diode to handle short-duration high-energy transients without damage.

  6. Is M1.5KE160CAE3 RoHS compliant?

    • Yes, M1.5KE160CAE3 is RoHS compliant, meeting the requirements for restriction of hazardous substances in electronic products.

  7. What is the operating temperature range of M1.5KE160CAE3?

    • The operating temperature range is -55°C to +175°C, enabling its use in a wide range of environmental conditions.

  8. Does M1.5KE160CAE3 require additional heat sinking?

    • Depending on the application and power dissipation, additional heat sinking may be necessary to ensure the diode operates within its specified temperature limits.

  9. Can M1.5KE160CAE3 be used for ESD protection?

    • While primarily designed for transient voltage suppression, M1.5KE160CAE3 can provide some level of ESD (electrostatic discharge) protection due to its fast response time.

  10. What packaging options are available for M1.5KE160CAE3?

    • M1.5KE160CAE3 is available in various package types, including DO-201, providing flexibility for different mounting and assembly requirements.