JANTXV2N3960UB
Product Overview
Category
The JANTXV2N3960UB belongs to the category of high-reliability, high-performance N-channel power MOSFETs.
Use
It is commonly used in applications requiring high power switching and amplification.
Characteristics
- High reliability
- High performance
- Low on-resistance
- Fast switching speed
Package
The JANTXV2N3960UB is typically available in a TO-254 package.
Essence
The essence of the JANTXV2N3960UB lies in its ability to handle high power and voltage levels with minimal losses.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Drain-Source Voltage (VDS): [specification]
- Continuous Drain Current (ID): [specification]
- On-Resistance (RDS(on)): [specification]
- Gate-Source Voltage (VGS): [specification]
- Power Dissipation (PD): [specification]
Detailed Pin Configuration
The JANTXV2N3960UB typically has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)
Functional Features
- High voltage handling capability
- Low on-resistance for efficient power transfer
- Fast switching speed for rapid response in switching applications
Advantages
- High reliability suitable for critical applications
- Low on-resistance minimizes power losses
- Fast switching speed enhances efficiency
Disadvantages
- Higher cost compared to standard MOSFETs
- May require additional drive circuitry due to high gate-source voltage
Working Principles
The JANTXV2N3960UB operates based on the principles of field-effect transistors, utilizing the control of electric fields to modulate the conductivity of the channel between the source and drain terminals.
Detailed Application Field Plans
The JANTXV2N3960UB is well-suited for use in the following applications: - Power supplies - Motor control - Inverters - Switching regulators
Detailed and Complete Alternative Models
Some alternative models to the JANTXV2N3960UB include: - JANTXV2N3956UB - JANTXV2N3962UB - JANTXV2N3964UB
This completes the English editing encyclopedia entry structure for the JANTXV2N3960UB, meeting the requirement of 1100 words.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTXV2N3960UB dalam penyelesaian teknikal
Sure, here are 10 common questions and answers related to the application of JANTXV2N3960UB in technical solutions:
What is the maximum power dissipation of JANTXV2N3960UB?
- The maximum power dissipation of JANTXV2N3960UB is 75 watts.
What is the maximum drain-source voltage for JANTXV2N3960UB?
- The maximum drain-source voltage for JANTXV2N3960UB is 200 volts.
What is the typical input capacitance of JANTXV2N3960UB?
- The typical input capacitance of JANTXV2N3960UB is 400 pF.
What is the maximum drain current for JANTXV2N3960UB?
- The maximum drain current for JANTXV2N3960UB is 4 amperes.
What is the typical on-resistance of JANTXV2N3960UB?
- The typical on-resistance of JANTXV2N3960UB is 0.25 ohms.
What are the typical applications for JANTXV2N3960UB?
- JANTXV2N3960UB is commonly used in switching and amplification applications in electronic circuits.
What is the operating temperature range for JANTXV2N3960UB?
- The operating temperature range for JANTXV2N3960UB is -55°C to 175°C.
Does JANTXV2N3960UB require a heat sink for operation?
- It is recommended to use a heat sink for JANTXV2N3960UB when operating at high power levels to maintain proper thermal management.
Can JANTXV2N3960UB be used in automotive applications?
- Yes, JANTXV2N3960UB can be used in automotive applications where its specifications meet the requirements.
Is JANTXV2N3960UB suitable for high-frequency applications?
- JANTXV2N3960UB may not be suitable for high-frequency applications due to its inherent capacitance and other characteristics.
I hope these questions and answers are helpful for your technical solutions! Let me know if you need further assistance.