Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
JANTXV1N6310
Lihat Butiran Helaian data

JANTXV1N6310 Encyclopedia Entry

Product Overview

Category

The JANTXV1N6310 belongs to the category of semiconductor devices, specifically a Zener diode.

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Reverse breakdown voltage of 6.2V
  • Low leakage current
  • High reliability

Package

The JANTXV1N6310 is typically available in a DO-41 package.

Essence

The essence of the JANTXV1N6310 lies in its ability to maintain a constant voltage across its terminals, providing stability in electronic circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Reverse Breakdown Voltage: 6.2V
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +200°C
  • Forward Voltage: 1.2V
  • Maximum Zener Impedance: 40Ω

Detailed Pin Configuration

The JANTXV1N6310 has two pins, anode, and cathode, with the anode being the positive terminal and the cathode being the negative terminal.

Functional Features

The JANTXV1N6310 provides stable voltage regulation by allowing current to flow in reverse when the voltage reaches the breakdown voltage, effectively maintaining a constant output voltage.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low leakage current
  • High reliability and ruggedness

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to temperature variations

Working Principles

The JANTXV1N6310 operates based on the principle of the Zener effect, where it allows controlled reverse current flow at a specific voltage, ensuring a constant voltage drop across its terminals.

Detailed Application Field Plans

The JANTXV1N6310 finds extensive use in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting

Detailed and Complete Alternative Models

Some alternative models to the JANTXV1N6310 include: - 1N4734A - BZX55C6V2 - 1N6267A - 1N5913B

In conclusion, the JANTXV1N6310 Zener diode offers precise voltage regulation and protection in electronic circuits, making it a crucial component in various applications.

[Word Count: 338]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTXV1N6310 dalam penyelesaian teknikal

  1. What is the JANTXV1N6310 diode used for?

    • The JANTXV1N6310 diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTXV1N6310 diode?

    • The JANTXV1N6310 diode typically has a maximum repetitive peak reverse voltage of 200V, a forward current of 3A, and a low forward voltage drop.

  3. How does the JANTXV1N6310 diode provide surge protection?

    • The JANTXV1N6310 diode can clamp transient overvoltages by diverting excess current away from sensitive components, thereby protecting them from damage.

  4. Can the JANTXV1N6310 diode be used in high-temperature environments?

    • Yes, the JANTXV1N6310 diode is designed to operate effectively in high-temperature environments, making it suitable for a wide range of applications.

  5. What are the typical applications of the JANTXV1N6310 diode?

    • The JANTXV1N6310 diode is commonly used in power supplies, voltage regulators, motor drives, and other electronic circuits requiring robust diode performance.

  6. Does the JANTXV1N6310 diode have a fast response time?

    • Yes, the JANTXV1N6310 diode exhibits a fast reverse recovery time, making it suitable for high-frequency switching applications.

  7. Is the JANTXV1N6310 diode available in different package types?

    • Yes, the JANTXV1N6310 diode is available in various package types, including axial lead, surface mount, and through-hole configurations.

  8. What are the potential failure modes of the JANTXV1N6310 diode?

    • Common failure modes of the JANTXV1N6310 diode include thermal runaway, reverse breakdown, and excessive forward voltage drop due to overcurrent conditions.

  9. Can the JANTXV1N6310 diode be used in automotive applications?

    • Yes, the JANTXV1N6310 diode is suitable for automotive applications, providing reliable performance in harsh operating conditions.

  10. Are there any recommended design considerations when using the JANTXV1N6310 diode in technical solutions?

    • Design considerations for the JANTXV1N6310 diode include proper heat sinking, voltage derating, and protection against reverse voltage spikes to ensure optimal performance and reliability.