JANTXV1N4494

Product Overview

Use

It is commonly used as a rectifier diode in electronic circuits.

Characteristics

High current capability
Fast switching speed
Low forward voltage drop

Package

The JANTXV1N4494 is typically available in a DO-5 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

Maximum Average Forward Current: 30A
Maximum Peak Reverse Voltage: 200V
Forward Voltage Drop: 1.1V at 15A
Reverse Recovery Time: 35ns

Detailed Pin Configuration

The JANTXV1N4494 has a standard two-pin configuration, with the anode and cathode clearly marked.

Functional Features

Efficient rectification of AC to DC
High current handling capability
Fast recovery time

Advantages

High reliability
Low forward voltage drop
Fast switching speed

Disadvantages

Higher reverse recovery time compared to some modern diodes
Larger physical size due to high current capability

Working Principles

The JANTXV1N4494 operates based on the principle of rectification, allowing current to flow in only one direction while blocking it in the opposite direction.

Detailed Application Field Plans

Power supply units
Motor drives
Welding equipment
Battery chargers

Detailed and Complete Alternative Models

JANTXV1N4493
JANTXV1N4495
JANTXV1N4496

In conclusion, the JANTXV1N4494 rectifier diode is a reliable component with high current capability and fast switching speed, making it suitable for various electronic applications requiring efficient AC to DC conversion.

[Word count: 270]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTXV1N4494 dalam penyelesaian teknikal

What is JANTXV1N4494?
- JANTXV1N4494 is a high-reliability, military-grade silicon rectifier diode designed for use in demanding technical applications.
What are the key specifications of JANTXV1N4494?
- The JANTXV1N4494 has a maximum repetitive peak reverse voltage of 200 volts, a maximum average forward current of 1 ampere, and a maximum forward voltage drop of 1 volt at 1 ampere.
In what technical solutions can JANTXV1N4494 be used?
- JANTXV1N4494 can be used in power supply circuits, voltage regulation, reverse polarity protection, and general rectification applications in aerospace, defense, and other high-reliability systems.
What are the temperature specifications for JANTXV1N4494?
- The JANTXV1N4494 is designed to operate over a temperature range of -65°C to +175°C, making it suitable for harsh environmental conditions.
Is JANTXV1N4494 radiation tolerant?
- Yes, JANTXV1N4494 is designed to withstand radiation exposure, making it suitable for use in space and other high-radiation environments.
What are the packaging options available for JANTXV1N4494?
- JANTXV1N4494 is available in various package types, including axial-lead, surface-mount, and chip form, providing flexibility for different application requirements.
Does JANTXV1N4494 have any industry certifications?
- Yes, JANTXV1N4494 is MIL-PRF-19500/407 qualified, ensuring its reliability and performance in military and aerospace applications.
Can JANTXV1N4494 be used in high-frequency applications?
- While JANTXV1N4494 is not specifically designed for high-frequency applications, it can be used in moderate frequency applications with appropriate consideration for its characteristics.
What are the typical failure modes of JANTXV1N4494?
- Common failure modes for JANTXV1N4494 include excessive reverse voltage, overcurrent conditions, and thermal stress, which should be carefully managed in the design of technical solutions.
Where can I find detailed application notes for using JANTXV1N4494 in technical solutions?
- Detailed application notes for JANTXV1N4494 can be found in the manufacturer's datasheet, technical documentation, and application engineering support resources.