JANTXV1N4484
Product Overview
Category
The JANTXV1N4484 belongs to the category of semiconductor devices, specifically a Zener diode.
Use
It is commonly used for voltage regulation and protection in electronic circuits.
Characteristics
- Voltage regulation capability
- Reverse breakdown voltage of 6.8V
- Low leakage current
- High reliability
Package
The JANTXV1N4484 is typically available in a DO-41 package.
Essence
The essence of the JANTXV1N4484 lies in its ability to maintain a constant voltage across its terminals, making it suitable for various electronic applications.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Reverse Breakdown Voltage: 6.8V
- Power Dissipation: 500mW
- Operating Temperature Range: -65°C to +200°C
- Zener Impedance: 20Ω
Detailed Pin Configuration
The JANTXV1N4484 has two pins, anode, and cathode, with the anode being the positive terminal and the cathode being the negative terminal.
Functional Features
- Voltage regulation: The JANTXV1N4484 maintains a constant voltage across its terminals, providing stability in electronic circuits.
- Overvoltage protection: It prevents damage to sensitive components by diverting excess voltage away from the circuit.
Advantages
- Precise voltage regulation
- Low leakage current
- High reliability and ruggedness
- Wide operating temperature range
Disadvantages
- Limited power dissipation capability
- Sensitive to temperature variations
Working Principles
The JANTXV1N4484 operates based on the principle of the Zener effect, where it allows current to flow in reverse bias once the voltage reaches its specified breakdown voltage, effectively maintaining a constant voltage drop across its terminals.
Detailed Application Field Plans
The JANTXV1N4484 finds extensive use in various electronic applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting - Voltage reference in precision circuits
Detailed and Complete Alternative Models
Some alternative models to the JANTXV1N4484 include: - 1N4732A - BZX55C6V8 - LM336Z-5.0 - 1N5226B
In conclusion, the JANTXV1N4484 Zener diode offers precise voltage regulation and overvoltage protection, making it a crucial component in numerous electronic circuits and systems.
[Word count: 372]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTXV1N4484 dalam penyelesaian teknikal
What is JANTXV1N4484?
- JANTXV1N4484 is a high-reliability, military-grade silicon power rectifier diode designed for use in demanding technical applications.
What are the key specifications of JANTXV1N4484?
- The JANTXV1N4484 has a maximum repetitive peak reverse voltage of 200 volts, a maximum average forward current of 6 amps, and a maximum forward voltage drop of 1 volt at 3 amps.
In what technical solutions can JANTXV1N4484 be used?
- JANTXV1N4484 can be used in power supplies, inverters, converters, and other electronic systems where high reliability and performance are required.
What are the advantages of using JANTXV1N4484 in technical solutions?
- The advantages of using JANTXV1N4484 include its high reliability, low forward voltage drop, and robust construction suitable for harsh environments.
What are the temperature considerations for JANTXV1N4484?
- JANTXV1N4484 is designed to operate over a wide temperature range, typically from -65°C to +175°C, making it suitable for both extreme cold and hot environments.
Are there any specific mounting or handling requirements for JANTXV1N4484?
- JANTXV1N4484 should be mounted on a suitable heat sink to dissipate heat effectively, and proper ESD precautions should be taken during handling to prevent damage.
Can JANTXV1N4484 be used in high-frequency applications?
- While JANTXV1N4484 is not specifically designed for high-frequency applications, it can still be used in certain moderate frequency applications with appropriate consideration for its characteristics.
What are the typical failure modes of JANTXV1N4484?
- Typical failure modes of JANTXV1N4484 include thermal overstress, reverse voltage breakdown, and mechanical damage due to improper handling or mounting.
Is JANTXV1N4484 compliant with any industry standards or certifications?
- JANTXV1N4484 is compliant with MIL-PRF-19500/528, which specifies the requirements for high-reliability semiconductor devices.
Where can I find detailed application notes or technical resources for using JANTXV1N4484 in my design?
- Detailed application notes and technical resources for JANTXV1N4484 can be found on the manufacturer's website or by contacting their technical support team.