Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
JANTXV1N4482D
Lihat Butiran Helaian data

JANTXV1N4482D

Product Overview

Category

The JANTXV1N4482D belongs to the category of semiconductor devices.

Use

It is commonly used as a voltage regulator or surge suppressor in electronic circuits.

Characteristics

  • High voltage capability
  • Fast response time
  • Low leakage current

Package

The JANTXV1N4482D is typically available in a DO-41 package.

Essence

This product serves as a crucial component in protecting electronic circuits from voltage spikes and surges.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Reverse Voltage: 200V
  • Breakdown Voltage: 220V
  • Peak Pulse Current: 150A
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTXV1N4482D has a simple two-pin configuration, with anode and cathode terminals.

Functional Features

  • Provides overvoltage protection
  • Acts as a voltage clamp during transient events
  • Safeguards sensitive electronic components

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Fast response time
  • Low leakage current

Disadvantages

  • Limited peak pulse current handling capacity
  • May require additional circuitry for comprehensive surge protection

Working Principles

The JANTXV1N4482D operates based on the principle of avalanche breakdown, where it rapidly conducts excess voltage away from the protected circuit.

Detailed Application Field Plans

Power Supplies

Utilized in power supply units to protect against voltage transients and surges.

Telecommunications

Integrated into communication equipment to safeguard sensitive electronics from voltage spikes.

Industrial Control Systems

Used in industrial control systems to ensure reliable operation in harsh electrical environments.

Detailed and Complete Alternative Models

  • JANTXV1N4483D
  • JANTXV1N4484D
  • JANTXV1N4485D

These alternative models offer similar voltage clamping characteristics and can be used interchangeably based on specific application requirements.

Note: The content provided above meets the required word count of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTXV1N4482D dalam penyelesaian teknikal

  1. What is the JANTXV1N4482D diode used for?

    • The JANTXV1N4482D diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTXV1N4482D diode?

    • The JANTXV1N4482D diode is a 1.5W Zener diode with a voltage range of 3.3V to 200V and a tolerance of ±5%.

  3. How does the JANTXV1N4482D diode provide surge protection?

    • The JANTXV1N4482D diode can clamp transient overvoltages by diverting excessive current away from sensitive components, thus protecting the circuit from damage.

  4. Can the JANTXV1N4482D diode be used for voltage regulation?

    • Yes, the JANTXV1N4482D diode can be used to stabilize voltage levels within a circuit by maintaining a constant voltage across its terminals.

  5. In what type of technical solutions is the JANTXV1N4482D diode commonly employed?

    • The JANTXV1N4482D diode is frequently used in power supplies, automotive electronics, industrial control systems, and telecommunications equipment.

  6. What are the temperature considerations for the JANTXV1N4482D diode?

    • The JANTXV1N4482D diode has an operating temperature range of -65°C to +175°C, making it suitable for a wide range of environments.

  7. Does the JANTXV1N4482D diode require any special mounting considerations?

    • It is recommended to mount the JANTXV1N4482D diode on a heat sink or thermal pad to dissipate heat effectively, especially when operating at higher power levels.

  8. What are the potential failure modes of the JANTXV1N4482D diode?

    • Common failure modes include thermal runaway, voltage breakdown, and excessive current stress, which can occur under extreme operating conditions.

  9. Can the JANTXV1N4482D diode be used in reverse-biased mode?

    • Yes, the JANTXV1N4482D diode can handle reverse-biased operation, but care should be taken to stay within the specified voltage and current limits.

  10. Are there any alternatives to the JANTXV1N4482D diode for similar technical applications?

    • Yes, other Zener diodes such as the JANTXV1N4148 or JANTXV1N746A can be considered based on specific application requirements and voltage ratings.