Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
JANTX1N759DUR-1
Lihat Butiran Helaian data

JANTX1N759DUR-1

Introduction

The JANTX1N759DUR-1 is a semiconductor diode belonging to the category of Zener diodes. It is commonly used for voltage regulation and protection in various electronic circuits due to its unique characteristics. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the JANTX1N759DUR-1.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low impedance, high reliability
  • Package: DO-41 (DO-204AL)
  • Essence: Semiconductor diode for voltage regulation
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

  • Voltage Range: 6.8V to 200V
  • Power Dissipation: 500mW
  • Operating Temperature: -65°C to +175°C
  • Zener Impedance: 10Ω
  • Tolerance: ±5%

Detailed Pin Configuration

The JANTX1N759DUR-1 has a standard DO-41 package with two leads. The cathode is marked with a band on the body of the diode.

Functional Features

  • Precise voltage regulation under reverse bias conditions
  • Low dynamic impedance
  • High reliability and stability over a wide temperature range

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Low impedance
  • Wide operating temperature range
  • High reliability and stability

Disadvantages

  • Limited power dissipation capability
  • Relatively higher cost compared to standard diodes

Working Principles

The JANTX1N759DUR-1 operates based on the Zener effect, where it maintains a constant voltage drop across its terminals when reverse biased. This allows it to regulate the voltage in electronic circuits and protect sensitive components from voltage spikes.

Detailed Application Field Plans

The JANTX1N759DUR-1 finds extensive use in various applications including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Voltage reference in precision measurement equipment - Signal clamping and limiting

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N759DUR-1 include: - 1N4732A: 4.7V Zener diode - 1N4742A: 12V Zener diode - 1N4764A: 82V Zener diode - BZX85C6V2: 6.2V Zener diode

In conclusion, the JANTX1N759DUR-1 Zener diode offers precise voltage regulation and protection in electronic circuits, making it a crucial component in various applications.

[Word count: 404]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTX1N759DUR-1 dalam penyelesaian teknikal

  1. What is the JANTX1N759DUR-1 diode used for?

    • The JANTX1N759DUR-1 diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTX1N759DUR-1 diode?

    • The JANTX1N759DUR-1 diode has a maximum repetitive peak reverse voltage of 100V, a forward current of 3A, and a low forward voltage drop.

  3. How does the JANTX1N759DUR-1 diode provide surge protection?

    • The JANTX1N759DUR-1 diode can handle transient overvoltage conditions by quickly conducting excess current away from sensitive components, protecting them from damage.

  4. In what applications is the JANTX1N759DUR-1 diode commonly used?

    • The JANTX1N759DUR-1 diode is often used in power supplies, voltage regulators, electronic equipment, and automotive systems for its reliable performance.

  5. What is the temperature range for the JANTX1N759DUR-1 diode?

    • The JANTX1N759DUR-1 diode operates within a wide temperature range, typically from -65°C to 175°C, making it suitable for various environmental conditions.

  6. Can the JANTX1N759DUR-1 diode be used in high-frequency applications?

    • Yes, the JANTX1N759DUR-1 diode is suitable for high-frequency applications due to its fast switching characteristics and low capacitance.

  7. How does the JANTX1N759DUR-1 diode contribute to voltage regulation?

    • The JANTX1N759DUR-1 diode helps stabilize voltage levels by allowing current to flow in only one direction, ensuring consistent output in regulated power supplies.

  8. Is the JANTX1N759DUR-1 diode suitable for rugged environments?

    • Yes, the JANTX1N759DUR-1 diode is designed to withstand harsh operating conditions, making it suitable for use in rugged industrial and military applications.

  9. What are the typical failure modes of the JANTX1N759DUR-1 diode?

    • The JANTX1N759DUR-1 diode may fail due to excessive current, voltage spikes, or prolonged exposure to high temperatures, emphasizing the importance of proper application and thermal management.

  10. Are there any recommended circuit designs for integrating the JANTX1N759DUR-1 diode?

    • Various circuit configurations, such as voltage clamping circuits and rectifier circuits, can be implemented with the JANTX1N759DUR-1 diode, and manufacturers often provide application notes for guidance.