Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
JANTX1N4126CUR-1
Lihat Butiran Helaian data

JANTX1N4126CUR-1

Introduction

The JANTX1N4126CUR-1 is a semiconductor diode belonging to the category of rectifier diodes. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the JANTX1N4126CUR-1.

Basic Information Overview

  • Category: Rectifier Diode
  • Use: The JANTX1N4126CUR-1 is commonly used in power supply applications, voltage regulation, and signal demodulation.
  • Characteristics: It exhibits high current capability, low forward voltage drop, and fast switching characteristics.
  • Package: The diode is typically available in a DO-35 package.
  • Essence: It serves as a crucial component in electronic circuits for converting alternating current (AC) to direct current (DC).
  • Packaging/Quantity: The JANTX1N4126CUR-1 is usually supplied in reels or tubes with varying quantities based on manufacturer specifications.

Specifications

  • Forward Voltage Drop: 0.7V maximum at 200mA
  • Reverse Voltage: 100V
  • Average Rectified Current: 150mA
  • Peak Surge Current: 2A
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The JANTX1N4126CUR-1 has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • High current capability
  • Fast recovery time
  • Low forward voltage drop
  • Excellent surge current capability

Advantages and Disadvantages

Advantages

  • Efficient conversion of AC to DC
  • Fast switching characteristics
  • Suitable for high-frequency applications

Disadvantages

  • Limited reverse voltage tolerance compared to other diodes
  • Sensitive to temperature variations

Working Principles

The JANTX1N4126CUR-1 operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the opposite direction. When forward biased, it conducts current efficiently, enabling the conversion of AC to DC.

Detailed Application Field Plans

The JANTX1N4126CUR-1 finds extensive use in the following applications: - Power supply units - Voltage regulators - Signal demodulation circuits - Switching power supplies - Inverters

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4126CUR-1 include: - 1N4001: A general-purpose diode with similar characteristics - 1N5819: Schottky diode with lower forward voltage drop - FR107: Fast recovery diode suitable for high-speed applications

In conclusion, the JANTX1N4126CUR-1 rectifier diode is a vital component in electronic circuits, offering efficient conversion of AC to DC, fast switching characteristics, and suitability for various applications.

[Word count: 420]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTX1N4126CUR-1 dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of JANTX1N4126CUR-1:

  1. What is the JANTX1N4126CUR-1 diode used for?

    • The JANTX1N4126CUR-1 is a high-reliability, general-purpose diode commonly used in military and aerospace applications.

  2. What are the key features of the JANTX1N4126CUR-1 diode?

    • The JANTX1N4126CUR-1 diode features a low leakage current, fast switching speed, and high reliability, making it suitable for demanding environments.

  3. Can the JANTX1N4126CUR-1 diode be used in commercial applications?

    • While it is designed for military and aerospace applications, the JANTX1N4126CUR-1 diode can also be used in commercial applications where high reliability and performance are required.

  4. What are the typical operating conditions for the JANTX1N4126CUR-1 diode?

    • The JANTX1N4126CUR-1 diode typically operates within a temperature range of -65°C to +175°C and has a maximum reverse voltage of 200 volts.

  5. How does the JANTX1N4126CUR-1 diode compare to standard diodes?

    • The JANTX1N4126CUR-1 diode offers higher reliability and performance compared to standard diodes, making it suitable for harsh environments and critical applications.

  6. What are some common applications for the JANTX1N4126CUR-1 diode?

    • Common applications include power supplies, signal processing, instrumentation, and control systems in military and aerospace equipment.

  7. Is the JANTX1N4126CUR-1 diode suitable for high-frequency applications?

    • Yes, the JANTX1N4126CUR-1 diode has a fast switching speed and low capacitance, making it suitable for high-frequency applications.

  8. Does the JANTX1N4126CUR-1 diode require special handling or mounting considerations?

    • It is recommended to follow standard ESD precautions and proper mounting techniques to ensure the reliability and performance of the JANTX1N4126CUR-1 diode.

  9. Can the JANTX1N4126CUR-1 diode withstand mechanical shock and vibration?

    • Yes, the JANTX1N4126CUR-1 diode is designed to withstand mechanical shock and vibration, making it suitable for rugged environments.

  10. Where can I find more detailed technical information about the JANTX1N4126CUR-1 diode?

    • Detailed technical information, including specifications and application notes, can be found in the datasheet provided by the manufacturer or distributor of the diode.